Search for: All records

This paper investigates the optoelectronic properties of CsPbBr3, a lead-based perovskite, and Cs2AgBiBr6, a lead-free double perovskite, in composite thick films synthesized using mechanochemical and hot press methods, with poly(butyl methacrylate) as the matrix. Comprehensive characterization was conducted, including X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), UV–visible spectroscopy (UV–Vis), and photoluminescence (PL). Results indicate that the polymer matrix does not significantly impact the crystalline structure of the perovskites but has a direct impact on the grain size and surface area, enhancing the interfacial charge transfer of the composites. Optical characterization indicates minimal changes in bandgap energies across all different phases, with CsPbBr3 exhibiting higher photocurrent than Cs2AgBiBr6. This is attributed to the CsPbBr3 superior charge carrier mobility. Both composites showed photoconductive behavior, with Cs2AgBiBr6 also demonstrating higher-energy (X-ray) photon detection. These findings highlight the potential of both materials for advanced photodetector applications, with Cs2AgBiBr6 offering an environmentally Pb-free alternative. 

Abstract Perovskites have emerged as a forerunner of electronics research due to their vast potential for optoelectronic applications. The numerous combinations of constituent ions and the potential for doping of perovskites lead to a high demand to track the underlying electronic properties. Solution‐based electrochemistry is particularly promising for detailed and facile assessment of perovskites. Here, electrochemical impedance spectroscopy (EIS) of methylammonium lead iodide (MAPbI₃) thin films is performed and model them with an equivalent circuit that accounts for solvent, ionic, and thin film effects. A dielectric constant consistent with prior AC studies and a diffusion constant harmonious with cation motion in MAPbI₃are extracted. An electrical double layer thickness in the perovskite film of 54 nm is obtained, consistent with lithium doping in perovskite films. Comparing the EIS and equivalent circuit model of perovskite films to control ITO‐only data enabled the assignment of the ions at each interface. This comparison implied a double layer of primarily lithium ions inside the perovskite film at the solution interface with significant recombination of ions on the solution side of the interface. This demonstrates EIS as a powerful tool for studying the fundamental charge accumulation and transport processes in perovskite thin films. 

Hybrid perovskites have attracted great interest in solar energy conversion and optoelectronic applications. The interconnected ionic and electronic effects complicate assessing the underlying electrical processes while contributing greatly to the efficiency and stability of devices. Fortunately, these coupled processes manifest on distinct timescales that enable frequency-specific electrochemical analysis. However, hybrid perovskites dissolve in most of the common aqueous and organic solvents utilized for electrochemistry. Here, we utilize a hydrofluoroether (HFE) solvent toolkit to perform nondestructive electrochemical impedance spectroscopy of methylammonium lead iodide (MAPbI3) perovskite thin films. This enables the extraction of dielectric constants and double-layer formation in these perovskite films. 

Perovskite light-emitting diodes (PeLEDs) are advancing because of their superior external quantum efficiencies (EQEs) and color purity. Still, addi-tional work is needed for blue PeLEDs to achieve the same benchmarks as the other visible colors. This study demonstrates an extremely efficient blue PeLED with a 488 nm peak emission, a maximum luminance of 8600 cd m−2, and a maximum EQE of 12.2% by incorporating the double-sided ethane-1,2-diammonium bromide (EDBr2) ligand salt along with the long-chain ligand methylphenylammonium chloride (MeCl). The EDBr2 successfully improves the interaction between 2D perovskite layers by reducing the weak van der Waals interaction and creating a Dion–Jacobson (DJ) structure. Whereas the pristine sample (without EDBr2) is inhibited by small stacking number (n) 2D phases with nonradiative recombination regions that diminish the PeLED performance, adding EDBr2 successfully enables better energy transfer from small n phases to larger n phases. As evidenced by photoluminescence (PL), scanning electron microscopy (SEM), and atomic force microscopy (AFM) characterization, EDBr2 improves the morphology by reduction of pinholes and passivation of defects, subsequently improving the efficiencies and operational lifetimes of quasi-2D blue PeLEDs. 

A Reset MOSFET is added to a perovskite MOSFET-based photodetector to serve as a current source to mitigate the influence of ionic movement on the performance of the photodetector. With the added MOSFET, the hysteresis is significantly reduced, and the dark current is controllable. The on/off ratio resumes to 10^6 and an ultrasensitive responsivity (over 80,000 A/W) is achieved under only 13 nW/cm^2 red (665 nm) light intensity. 

Hybrid perovskites are emerging as highly efficient materials for optoelectronic applications, however, their operational lifetime has remained a limiting factor for their continued progress. In this work, perovskite light emitting electrochemical cells utilizing an optimized fraction of lithium hexafluorophosphate (LiPF6) salt additive exhibit enhanced stability. At 0.5 wt% LiPF6, devices exhibit 100 h operation at high brightness in excess of 800 cd/m^2 under constant current driving, achieving a maximum luminance of 3260 cd/m^2 and power efficiency of 9.1 Lm/W. This performance extrapolates to a 6700 h luminance half‐life from 100 cd/m^2, a 5.6‐fold improvement over devices with no LiPF6. Analysis under constant voltage driving reveals three current regimes, with lithium addition strongly enhancing current in the second and third regimes. The third regime correlates lower rates of luminance with lowered current flow. These losses are mitigated by LiPF6 addition, an effect postulated to arise from preservation of perovskite structure. Electrochemical impedance spectroscopy with equivalent circuit modeling reveals that electrical double layer widths are minimized at 0.5 wt% LiPF6 and inversely correlated with efficient performance. These results demonstrate that an optimal LiPF6 concentration improves stability and efficiency through improved double layer formation and retention of perovskite structure.