Search for: All records

Carbon reactive capture and conversion offers a sustainable route to valuable chemicals and fuels while aiding GHG reduction. Direct electrochemical conversion of capture solutions like bicarbonate avoids the energy demands... 

ArticleSize-Controlled Synthesis of Rhodium Nanocatalysts and Applications in Low-Temperature HydroformylationAndrew Lamkins 1,2, Charles J. Ward 1,2, Jeffrey T. Miller 3, Ziad Alsudairy 4, Xinle Li 4, Joseph Thuma 1,2, Ruoyu Cui 1,2, Xun Wu 1,2, Levi M. Stanley 1 and Wenyu Huang 1,2,*1 Department of Chemistry, Iowa State University, Ames, IA 50010, USA2 Ames Laboratory, U.S. Department of Energy, Ames, IA 50010, USA3 Davidson School of Chemical Engineering, Purdue University, West Lafayette, IN 47907, USA4 Department of Chemistry, Clark Atlanta University, Atlanta, GA 30314, USA* Correspondence: whuang@iastate.eduReceived: 3 December 2024; Revised: 30 December 2024; Accepted: 3 January 2025; Published: 10 January 2025 Abstract: Controlling the size and distribution of metal nanoparticles is one of the simplest methods of tuning the catalytic properties of a material. For a nanocrystal particle, the ratio of edge-to-terrace sites can be critical in determining its catalytic activity and selectivity to desired products. To study these effects, we have developed a simple impregnation method of controlling the dispersion of rhodium atoms at the same metal loading in the range of nanoparticles less than 10 nm. Rh precursor salts are loaded onto inert SBA-15, and increasing the ratio of chloride to acetylacetonate salts improves the dispersion of rhodium atoms to form small Rh nanoparticles. Extensive characterization of the size-controlled catalysts, including XAS and in-situ CO-DRIFTS studies, has been performed to characterize the structure of Rh nanoparticles. Applying these catalysts to the hydroformylation of styrene, we observed that turnover frequency increases with decreasing particle size from 6.4 to 1.6 nm. When applied to hydroformylation reactions, we achieved a high branched product selectivity and successfully demonstrated a route to synthesizing the pain relief drug ibuprofen. This simple method can also synthesize Pt and Pd nanoparticles between 2–10 nm. 

Surface contrast solution NMR and reaction kinetic assays reveal an active role for H₂spillover in the phenol hydrogenation reaction catalyzed by Pd on reducible metal oxides. 

Electrocatalytic oxidative dehydrogenation (EOD) of aldehydes enables ultra-low voltage, bipolar H2 production with co-generation of carboxylic acid. Herein, we reported a simple galvanic replacement method to prepare CuM (M = Pt, Pd, Au, and Ag) bimetallic catalysts to improve the EOD of furfural to reach industrially relevant current densities. The redox potential difference between Cu/Cu2+ and a noble metal M/My+ can incorporate the noble metal on the Cu surface and enlarge its surface area. Particularly, dispersing Pt in Cu (CuPt) achieved a record-high current density of 498 mA cm–2 for bipolar H2 production at a low cell voltage of 0.6 V and a Faradaic efficiency of >80% to H2. Future research is needed to deeply understand the synergistic effects of Cu–M toward EOD of furfural, and improve the Cu–M catalyst stability, thus offering great opportunities for future distributed manufacturing of green hydrogen and carbon chemicals with practical rates and low-carbon footprints. 

Doping, or incremental substitution of one element for another, is an effective way to tailor a compound’s structure as well as its physical and chemical properties. Herein, we replaced up to 30% of Ni with Co in members of the family of layered LiNiB compounds, stabilizing the high-temperature polymorph of LiNiB while the room-temperature polymorph does not form. By studying this layered boride with in situ high-temperature powder diffraction, we obtained a distorted variant of LiNi0.7Co0.3B featuring a perfect interlayer placement of [Ni0.7Co0.3B] layers on top of each other─a structural motif not seen before in other borides. Because of the Co doping, LiNi0.7Co0.3B can undergo a nearly complete topochemical Li deintercalation under ambient conditions, resulting in a metastable boride with the formula Li0.04Ni0.7Co0.3B. Heating of Li0.04Ni0.7Co0.3B in anaerobic conditions led to yet another metastable boride, Li0.01Ni0.7Co0.3B, with a CoB-type crystal structure that cannot be obtained by simple annealing of Ni, Co, and B. No significant alterations of magnetic properties were detected upon Co-doping in the temperature-independent paramagnet LiNi0.7Co0.3B or its Li-deintercalated counterparts. Finally, Li0.01Ni0.7Co0.3B stands out as an exceptional catalyst for the selective hydrogenation of the vinyl C═C bond in 3-nitrostyrene, even in the presence of other competing functional groups. This research showcases an innovative approach to heterogeneous catalyst design by meticulously synthesizing metastable compounds. 

Ethylene oxide (EO) is one of the most crucial materials in plastic industries. The traditional catalytic process requires high temperature and pressure to produce EO. A chlorine-assisted system has been reported to produce EO, but it required noble metal catalysts, which significantly increased the cost. In this work, a MOF-derived Co 3 O 4 /nitrogen-doped carbon composite (Co 3 O 4 /NC) prepared through a two-step calcination method exhibited remarkable chlorine evolution reaction (ClER) activity as compared with a commercial RuO 2 catalyst, which can be attributed to the higher specific surface area and lower resistance of its porous structure and nitrogen-doped carbon. Furthermore, the Co 3 O 4 /NC maintained a stable potential and a high faradaic efficiency throughout the 10-hour electrolysis test. 

Delineated here is the first mechanochemical synthesis of covalent organic frameworks (COF) adsorbents that exhibited exceptional iodine adsorption capacities of 6.4–7.1 g g⁻¹, surpassing those of most existing COFs.