Search for: All records

Degradable polymers are promising materials for use to reduce plastic waste and advance biomedical applications. However, to meet the demands of specific applications, tailoring the properties of degradable polymers through precise modification of their chemical structures is critical. Herein, we present a new class of degradable and functionalizable polyacetals synthesized by the ring-opening metathesis copolymerization (ROMP) of two commercially available monomers: dimethyl oxanorbornadiene-2,3-dicarboxylate (OND) and 4,7-dihydro-1,3-dioxepin (DXP). The resulting polyacetals are not only acid-degradable but also readily and efficiently functionalizable via thia–Michael addition, yielding degradable polymer materials with various functional groups and tunable thermal properties. 

Here we report the design and synthesis of acid-degradable and functionalizable polymers via alternating ring-opening metathesis copolymerization of oxanorbornadiene dicarboxylate and 2,3-dihydrofuran. The resulting polymers can undergo post-polymerization modification through... 

Biomass-derived polymer materials are emerging as sustainable and low-carbon footprint alternatives to the current petroleum-based commodity plastics. In the past decade, the ring-opening metathesis polymerization (ROMP) technique has been widely used for the polymerization of cyclic olefin monomers derived from biorenewable resources, giving rise to a diverse set of biobased polymer materials. However, most synthetic biobased polymers made by ROMP are nondegradable because of their all-carbon backbones. Herein, we present a modular synthetic strategy to acid-degradable poly(enol ether)s via ring-opening metathesis copolymerization of biorenewable oxanorbornenes and 3,4-dihydropyran (DHP). 1H NMR analysis reveals that the percentage of DHP units in the resulting copolymers gradually increases as the feed ratio of DHP to oxanorbornene increases. The composition of the copolymers plays a pivotal role in governing their thermal properties. Thermogravimetric analysis shows that an increasing percentage of DHP results in a decrease in the decomposition temperatures, suggesting that the incorporation of enol ether groups in the polymer backbone reduces the thermal stability of the copolymers. Moreover, a wide range of glass transition temperatures (16–165 °C) can be achieved by tuning the copolymer composition and the oxanorbornene structure. Critically, all of the poly(enol ether)s developed in this study are degradable under mildly acidic conditions. A higher incorporation of DHP in the copolymer leads to enhanced degradability, as evidenced by smaller final degradation products. Altogether, this study provides a facile approach for synthesizing biorenewable and degradable polymer materials with highly tunable thermal properties desired for their potential industrial applications. 

The concentration of the stratospheric ozone layer is of great interest to the atmospheric science community, since it is critical in blocking the harmful UV radiation from the sun. Typically, regular weather balloons with Electrochemical Cell (ECC) ozonesondes are used to determine the vertical profile of ozone column concentration within a flight time of ~2 hours, with a limited fraction of the data relevant to the ozone layer. Therefore, it would be ideal if ozonesonde flights can be maintained within the ozone layer (~60,000 to 80,000 ft) to maximize the efficiency in data acquisition, especially considering the rising costs of ozonesonding and high-altitude ballooning. We adapted the vented balloon with altitude-control flight capability from the Nationwide Eclipse Ballooning Program (NEBP) for atmospheric ozonesonding and deployed a commercial ECC ozonesonde payload with this approach from Central Texas during the 2024 total solar eclipse in the hope of (1) field testing the performance and application potential of vented balloons in horizontal ozone layer profiling and (2) monitoring the stratospheric ozone layer during the solar eclipse for an extended period of time. The adapted vent valve successfully lowered the balloon from 71,000 ft to 41,000 ft within minutes and demonstrated promising performance in the field. Unfortunately, unexpected radio communication difficulties were experienced from six hours before the totality to two hours after, leaving the second research objective largely unobtainable. 

Degradable polymers made via ring-opening metathesis polymerization (ROMP) hold tremendous promise as eco-friendly materials. However, most of the ROMP monomers are derived from petroleum resources, which are typically considered less sustainable compared to biomass. Herein, we present a synthetic strategy to degradable polymers by harnessing alternating ROMP of biomass-based cyclic olefin monomers including exo-oxanorbornenes and cyclic enol ethers. A library of well-defined poly(enol ether)s with modular structures, tunable glass transition temperatures, and controlled molecular weights was achieved, demonstrating the versatility of this approach. Most importantly, the resulting copolymers exhibit high degrees of alternation, rendering their backbones fully degradable under acidic conditions. 

The current insufficient recycling of commodity polymer waste has resulted in pressing environmental and human health issues in our modern society. In the quest for next-generation polymer materials, chemists have recently shifted their attention to the design of chemically recyclable polymers that can undergo depolymerization to regenerate monomers under mild conditions. During the past decade, ring-closing metathesis reactions have been demonstrated to be a robust approach for the depolymerization of polyolefins, producing low-strain cyclic alkene products which can be repolymerized back to new batches of polymers. In this review, we aim to highlight the recent advances in chemical recycling of polyolefins enabled by ring-closing metathesis depolymerization (RCMD). A library of depolymerizable polyolefins will be covered based on the ring size of their monomers or depolymerization products, including five-membered, six-membered, eight-membered, and macrocyclic rings. Moreover, current limitations, potential applications, and future opportunities of the RCMD approach will be discussed. It is clear from recent research in this field that RCMD represents a powerful strategy towards closed-loop chemical recycling of novel polyolefin materials. 

Abstract It is shown that a decaying neutralino in a supergravity unified framework is a viable candidate for dark matter. Such a situation arises in the presence of a hidden sector with ultraweak couplings to the visible sector where the neutralino can decay into the hidden sector’s lightest supersymmetric particle (LSP) with a lifetime larger than the lifetime of the universe. We present a concrete model where the MSSM/SUGRA is extended to include a hidden sector comprised of $$U(1)_{X_1} \times U(1)_{X_2}$$ U ( 1 ) X 1 × U ( 1 ) X 2 gauge sector and the LSP of the hidden sector is a neutralino which is lighter than the LSP neutralino of the visible sector. We compute the loop suppressed radiative decay of the visible sector neutralino into the neutralino of the hidden sector and show that the decay can occur with a lifetime larger than the age of the universe. The decaying neutralino can be probed by indirect detection experiments, specifically by its signature decay into the hidden sector neutralino and an energetic gamma ray photon. Such a gamma ray can be searched for with improved sensitivity at Fermi-LAT and by future experiments such as the Square Kilometer Array (SKA) and the Cherenkov Telescope Array (CTA). We present several benchmarks which have a natural suppression of the hadronic channels from dark matter annihilation and decays and consistent with measurements of the antiproton background. 

Abstract Low‐strain cyclic olefin monomers, including five‐membered, six‐membered, eight‐membered, and macrocyclic rings, have been recently exploited for the synthesis of depolymerizable polyolefins via ring‐opening metathesis polymerization (ROMP). Such polyolefins can undergo ring‐closing metathesis depolymerization (RCMD) to regenerate their original monomers. Nevertheless, the depolymerization behavior of polyolefins prepared by ROMP of seven‐membered cyclic olefins, an important class of low‐strain rings, still remains unexplored. In this study, we demonstrate the chemical recycling of polyheptenamers to cycloheptene under standard RCMD conditions. Highly efficient depolymerization of polyheptenamer was enabled by Grubbs' second‐generation catalyst in toluene. It was observed that the monomer yields increased when the depolymerization temperature increased and the starting polymer concentration was reduced. A near‐quantitative monomer regeneration (>96%) was achieved within 1 h under dilute conditions (20 mM of olefins) at 60°C. Moreover, polyheptenamer exhibited a decomposition temperature above 430°C, highlighting its potential as a new class of thermally stable and chemically recyclable polymer materials. 

Abstract Photothermal reagents sensitive to near‐infrared (NIR) light are promising imaging agents and therapeutics for anticancer applications because of the deep tissue penetration of NIR light, allowing for spatiotemporal control over the therapeutic activity, with minimal damage to normal tissues. Herein, a new class of NIR‐sensitive biopolymer‐based nanoparticles is presented by covalently conjugating indocyanine green (ICG) onto the surface of naturally occurring glycogen nanoparticles. The resulting ICG‐glycogen conjugates exhibit a markedly enhanced aqueous stability in comparison to free ICG molecules. Furthermore, an efficient light‐to‐heat conversion is enabled by ICG‐glycogen conjugates, as evidenced by the elevated temperatures of their aqueous solutions upon exposure to NIR light. Critically, ICG‐glycogen conjugates are capable of cell internalization, and under NIR irradiation the effective eradication of breast cancer cells, demonstrating their potential in photothermal therapy for cancer.