Search for: All records

Abstract. The Global Ocean Data Analysis Project (GLODAP) is asynthesis effort providing regular compilations of surface-to-bottom oceanbiogeochemical bottle data, with an emphasis on seawater inorganic carbonchemistry and related variables determined through chemical analysis ofseawater samples. GLODAPv2.2022 is an update of the previous version,GLODAPv2.2021 (Lauvset et al., 2021). The major changes are as follows: datafrom 96 new cruises were added, data coverage was extended until 2021, andfor the first time we performed secondary quality control on all sulfurhexafluoride (SF6) data. In addition, a number of changes were made todata included in GLODAPv2.2021. These changes affect specifically theSF6 data, which are now subjected to secondary quality control, andcarbon data measured on board the RV Knorr in the Indian Ocean in 1994–1995 whichare now adjusted using certified reference material (CRM) measurements made at the time. GLODAPv2.2022includes measurements from almost 1.4 million water samples from the globaloceans collected on 1085 cruises. The data for the now 13 GLODAP corevariables (salinity, oxygen, nitrate, silicate, phosphate, dissolvedinorganic carbon, total alkalinity, pH, chlorofluorocarbon-11 (CFC-11), CFC-12, CFC-113, CCl4,and SF6) have undergone extensive quality control with a focus onsystematic evaluation of bias. The data are available in two formats: (i) assubmitted by the data originator but converted to World Ocean CirculationExperiment (WOCE) exchange format and (ii) as a merged data product withadjustments applied to minimize bias. For the present annual update,adjustments for the 96 new cruises were derived by comparing those data withthe data from the 989 quality-controlled cruises in the GLODAPv2.2021 dataproduct using crossover analysis. SF6 data from all cruises wereevaluated by comparison with CFC-12 data measured on the same cruises. Fornutrients and ocean carbon dioxide (CO2) chemistry comparisons toestimates based on empirical algorithms provided additional context foradjustment decisions. The adjustments that we applied are intended to removepotential biases from errors related to measurement, calibration, and datahandling practices without removing known or likely time trends orvariations in the variables evaluated. The compiled and adjusted dataproduct is believed to be consistent to better than 0.005 in salinity, 1 % in oxygen, 2 % in nitrate, 2 % in silicate, 2 % in phosphate,4 µmol kg−1 in dissolved inorganic carbon, 4 µmol kg−1in total alkalinity, 0.01–0.02 in pH (depending on region), and 5 % inthe halogenated transient tracers. The other variables included in thecompilation, such as isotopic tracers and discrete CO2 fugacity(fCO2), were not subjected to bias comparison or adjustments. The original data, their documentation, and DOI codes are available at theOcean Carbon and Acidification Data System of NOAA NCEI (https://www.ncei.noaa.gov/access/ocean-carbon-acidification-data-system/oceans/GLODAPv2_2022/, last access: 15 August 2022). This site also provides access to themerged data product, which is provided as a single global file and as fourregional ones – the Arctic, Atlantic, Indian, and Pacific oceans –under https://doi.org/10.25921/1f4w-0t92 (Lauvset et al.,2022). These bias-adjusted product files also include significant ancillaryand approximated data, which were obtained by interpolation of, orcalculation from, measured data. This living data update documents theGLODAPv2.2022 methods and provides a broad overview of the secondary qualitycontrol procedures and results. 

Abstract. The Global Ocean Data Analysis Project (GLODAP) is asynthesis effort providing regular compilations of surface to bottom oceanbiogeochemical data, with an emphasis on seawater inorganic carbon chemistryand related variables determined through chemical analysis of water samples.This update of GLODAPv2, v2.2019, adds data from 116 cruises to the previousversion, extending its coverage in time from 2013 to 2017, while also addingsome data from prior years. GLODAPv2.2019 includes measurements from morethan 1.1 million water samples from the global oceans collected on 840cruises. The data for the 12 GLODAP core variables (salinity, oxygen,nitrate, silicate, phosphate, dissolved inorganic carbon, total alkalinity,pH, CFC-11, CFC-12, CFC-113, and CCl4) have undergone extensive qualitycontrol, especially systematic evaluation of bias. The data are available intwo formats: (i) as submitted by the data originator but updated to WOCEexchange format and (ii) as a merged data product with adjustments appliedto minimize bias. These adjustments were derived by comparing the data fromthe 116 new cruises with the data from the 724 quality-controlled cruises ofthe GLODAPv2 data product. They correct for errors related to measurement,calibration, and data handling practices, taking into account any known orlikely time trends or variations. The compiled and adjusted data product isbelieved to be consistent to better than 0.005 in salinity, 1 % in oxygen,2 % in nitrate, 2 % in silicate, 2 % in phosphate, 4 µmol kg−1 in dissolved inorganic carbon, 4 µmol kg−1 in totalalkalinity, 0.01–0.02 in pH, and 5 % in the halogenated transienttracers. The compilation also includes data for several other variables,such as isotopic tracers. These were not subjected to bias comparison oradjustments. The original data, their documentation and DOI codes are available in theOcean Carbon Data System of NOAA NCEI(https://www.nodc.noaa.gov/ocads/oceans/GLODAPv2_2019/, last access: 17 September 2019). Thissite also provides access to the merged data product, which is provided as asingle global file and as four regional ones – the Arctic, Atlantic, Indian,and Pacific oceans – under https://doi.org/10.25921/xnme-wr20(Olsen et al., 2019). Theproduct files also include significant ancillary and approximated data.These were obtained by interpolation of, or calculation from, measured data.This paper documents the GLODAPv2.2019 methods and provides a broad overviewof the secondary quality control procedures and results. 

Abstract. Accurate assessment of anthropogenic carbon dioxide (CO2) emissions andtheir redistribution among the atmosphere, ocean, and terrestrial biospherein a changing climate is critical to better understand the global carboncycle, support the development of climate policies, and project futureclimate change. Here we describe and synthesize datasets and methodology toquantify the five major components of the global carbon budget and theiruncertainties. Fossil CO2 emissions (EFOS) are based on energystatistics and cement production data, while emissions from land-use change(ELUC), mainly deforestation, are based on land use and land-use changedata and bookkeeping models. Atmospheric CO2 concentration is measureddirectly, and its growth rate (GATM) is computed from the annualchanges in concentration. The ocean CO2 sink (SOCEAN) is estimatedwith global ocean biogeochemistry models and observation-baseddata products. The terrestrial CO2 sink (SLAND) is estimated withdynamic global vegetation models. The resulting carbon budget imbalance(BIM), the difference between the estimated total emissions and theestimated changes in the atmosphere, ocean, and terrestrial biosphere, is ameasure of imperfect data and understanding of the contemporary carboncycle. All uncertainties are reported as ±1σ. For the firsttime, an approach is shown to reconcile the difference in our ELUCestimate with the one from national greenhouse gas inventories, supportingthe assessment of collective countries' climate progress. For the year 2020, EFOS declined by 5.4 % relative to 2019, withfossil emissions at 9.5 ± 0.5 GtC yr−1 (9.3 ± 0.5 GtC yr−1 when the cement carbonation sink is included), and ELUC was 0.9 ± 0.7 GtC yr−1, for a total anthropogenic CO2 emission of10.2 ± 0.8 GtC yr−1 (37.4 ± 2.9 GtCO2). Also, for2020, GATM was 5.0 ± 0.2 GtC yr−1 (2.4 ± 0.1 ppm yr−1), SOCEAN was 3.0 ± 0.4 GtC yr−1, and SLANDwas 2.9 ± 1 GtC yr−1, with a BIM of −0.8 GtC yr−1. Theglobal atmospheric CO2 concentration averaged over 2020 reached 412.45 ± 0.1 ppm. Preliminary data for 2021 suggest a rebound in EFOSrelative to 2020 of +4.8 % (4.2 % to 5.4 %) globally. Overall, the mean and trend in the components of the global carbon budgetare consistently estimated over the period 1959–2020, but discrepancies ofup to 1 GtC yr−1 persist for the representation of annual tosemi-decadal variability in CO2 fluxes. Comparison of estimates frommultiple approaches and observations shows (1) a persistent largeuncertainty in the estimate of land-use changes emissions, (2) a lowagreement between the different methods on the magnitude of the landCO2 flux in the northern extra-tropics, and (3) a discrepancy betweenthe different methods on the strength of the ocean sink over the lastdecade. This living data update documents changes in the methods and datasets used in this new global carbon budget and the progress in understandingof the global carbon cycle compared with previous publications of this dataset (Friedlingstein et al., 2020, 2019; LeQuéré et al., 2018b, a, 2016, 2015b, a, 2014, 2013). Thedata presented in this work are available at https://doi.org/10.18160/gcp-2021 (Friedlingstein et al., 2021). 

This dataset consists of the Surface Ocean CO2 Atlas Version 2022 (SOCATv2022) data product files. The ocean absorbs one quarter of the global CO2 emissions from human activity. The community-led Surface Ocean CO2 Atlas (www.socat.info) is key for the quantification of ocean CO2 uptake and its variation, now and in the future. SOCAT version 2022 has quality-controlled in situ surface ocean fCO2 (fugacity of CO2) measurements on ships, moorings, autonomous and drifting surface platforms for the global oceans and coastal seas from 1957 to 2021. The main synthesis and gridded products contain 33.7 million fCO2 values with an estimated accuracy of better than 5 μatm. A further 6.4 million fCO2 sensor data with an estimated accuracy of 5 to 10 μatm are separately available. During quality control, marine scientists assign a flag to each data set, as well as WOCE flags of 2 (good), 3 (questionable) or 4 (bad) to individual fCO2 values. Data sets are assigned flags of A and B for an estimated accuracy of better than 2 μatm, flags of C and D for an accuracy of better than 5 μatm and a flag of E for an accuracy of better than 10 μatm. Bakker et al. (2016) describe the quality control criteria used in SOCAT versions 3 to 2022. Quality control comments for individual data sets can be accessed via the SOCAT Data Set Viewer (www.socat.info). All data sets, where data quality has been deemed acceptable, have been made public. The main SOCAT synthesis files and the gridded products contain all data sets with an estimated accuracy of better than 5 µatm (data set flags of A to D) and fCO2 values with a WOCE flag of 2. Access to data sets with an estimated accuracy of 5 to 10 (flag of E) and fCO2 values with flags of 3 and 4 is via additional data products and the Data Set Viewer (Table 8 in Bakker et al., 2016). SOCAT publishes a global gridded product with a 1° longitude by 1° latitude resolution. A second product with a higher resolution of 0.25° longitude by 0.25° latitude is available for the coastal seas. The gridded products contain all data sets with an estimated accuracy of better than 5 µatm (data set flags of A to D) and fCO2 values with a WOCE flag of 2. Gridded products are available monthly, per year and per decade. Two powerful, interactive, online viewers, the Data Set Viewer and the Gridded Data Viewer (www.socat.info), enable investigation of the SOCAT synthesis and gridded data products. SOCAT data products can be downloaded. Matlab code is available for reading these files. Ocean Data View also provides access to the SOCAT data products (www.socat.info). SOCAT data products are discoverable, accessible and citable. The SOCAT Data Use Statement (www.socat.info) asks users to generously acknowledge the contribution of SOCAT scientists by invitation to co-authorship, especially for data providers in regional studies, and/or reference to relevant scientific articles. The SOCAT website (www.socat.info) provides a single access point for online viewers, downloadable data sets, the Data Use Statement, a list of contributors and an overview of scientific publications on and using SOCAT. Automation of data upload and initial data checks allows annual releases of SOCAT from version 4 onwards. SOCAT is used for quantification of ocean CO2 uptake and ocean acidification and for evaluation of climate models and sensor data. SOCAT products inform the annual Global Carbon Budget since 2013. The annual SOCAT releases by the SOCAT scientific community are a Voluntary Commitment for United Nations Sustainable Development Goal 14.3 (Reduce Ocean Acidification) (#OceanAction20464). More broadly the SOCAT releases contribute to UN SDG 13 (Climate Action) and SDG 14 (Life Below Water), and to the UN Decade of Ocean Science for Sustainable Development. Hundreds of peer-reviewed scientific publications and high-impact reports cite SOCAT. The SOCAT community-led synthesis product is a key step in the value chain based on in situ inorganic carbon measurements of the oceans, which provides policy makers with critical information on ocean CO2 uptake in climate negotiations. The need for accurate knowledge of global ocean CO2 uptake and its (future) variation makes sustained funding of in situ surface ocean CO2 observations imperative.