Search for: All records

The elucidation of structure-to-function relationships for two-dimensional (2D) hybrid perovskites remains a primary challenge for engineering efficient perovskite-based devices. By combining insights from theory and experiment, we describe the introduction of bifunctional ligands that are capable of making strong hydrogen bonds within the organic bilayer. We find that stronger intermolecular interactions draw charge away from the perovskite layers, and we have formulated a simple and intuitive computational descriptor, the charge separation descriptor (CSD), that accurately describes the relationship between the Pb-I-Pb angle, band gap, and in-plane charge transport with the strength of these interactions. A higher CSD value correlates to less distortion of the Pb-I-Pb angle, a reduced band gap, and higher in-plane mobility of the perovskite. These improved material properties result in improved device characteristics of the resulting solar cells.

 

While typical perovskite solar cells (PSCs) with doped Spiro-OMeTAD as a hole transport material (HTM) have shown rapid increase in their power-conversion efficiencies (PCEs), their poor stability remains a big concern as the dopants and additives used with Spiro-OMeTAD have a strong tendency to diffuse into and degrade the perovskite active layer under normal operating conditions. Aiming to push forward the development of PSCs, many dopant-free small-molecular HTMs have been reported based on energetic considerations for charge transfer and criteria for charge transport. However, the PCEs of the state-of-the-art PSCs with dopant-free small-molecular HTMs are still inferior to those using doped Spiro-OMeTAD, and little attention has been paid to the interactions between the HTM and perovskite absorber in PSCs. Here, we report a facile design concept to functionalize HTMs so that they can passivate perovskite surface defects and enable perovskite active layers with lower density of surface trap states and more efficient charge transfer to the hole transport layer. As a consequence, perovskite solar cells with a functionalized HTM exhibit a champion PCE of 22.4%, the highest value for PSCs using dopant-free small molecular HTMs to date, and substantively improved operational stability under continuous illumination. With a T 80 of (1617 ± 7) h for encapsulated cells tested at 30 °C in air, the PSCs containing the functionalized HTM are among the most stable PSCs using dopant-free small-molecular HTMs. The effectiveness of our strategy is demonstrated in PSCs comprising both a state-of-the-art MA-free perovskite and MAPbI, a system having more surface defects, and implies the potential generality of our strategy for a broad class of perovskite systems, to further advance highly efficient and stable solar cells. 

Organic photovoltaic cells that employ Y‐series non‐fullerene acceptors (NFAs) have recently achieved impressive power‐conversion efficiencies (>18%). To fulfill their commercial promise, it is important to quantify their operational lifetimes and understand their degradation mechanisms. In this work, the spectral‐dependent photostability of films and solar cells comprising several Y‐series acceptors and the donor polymer PM6 is investigated systematically. By applying longpass filters during aging, it is shown that UV/near‐UV photons are responsible for the photochemical decomposition of Y‐series acceptors; this degradation is the primary driver of early solar cell performance losses. Using mass spectrometry, the vinylene linkage between the core and electron‐accepting moieties of Y‐series acceptors is identified as the weak point susceptible to cleavage under UV‐illumination. Employing a series of device characterization, along with numerical simulations, the efficiency losses in organic photovoltaic cells are attributed to the formation of traps, which reduces charge extraction efficiency and facilitates non‐radiative recombination as the Y‐series acceptors degrade. This study provides new insights for molecular degradation of organic photovoltaic absorber materials and highlights the importance of future molecular design and strategies for improved solar cell stability.

 

Perovskite solar cells (PSCs) have rapidly emerged as one of the hottest topics in the photovoltaics community owing to their high power‐conversion efficiencies (PCE), and the promise to be produced at low cost. Among various PSCs, typical 3D perovskite‐based solar cells deliver high PCE but they suffer from severe instability, which restricts their practical applications. In contrast to 3D perovskites, 2D perovskites that incorporate larger, less volatile, and generally more hydrophobic organic cations exhibit much improved thermal, chemical, and environmental stability. 2D perovskites can have different roles within a solar cell, either as the primary light absorber (2D PSCs), or as a capping layer atop a 3D perovskite absorbing layer (2D/3D PSCs). Tradeoffs between PCE and stability exist in both types of PSCs—2D PSCs are more stable but exhibit lower efficiency while 2D/3D PSCs deliver exciting efficiency but show relatively poor stability. To address this PCE/stability tradeoff, the challenges both the 2D and 2D/3D PSCs face are identified and select works the community has undertaken to overcome them are highlighted in this review. It is ended with several recommendations on how to further improve PSCs so their performance and stability can be commensurate with application requirements.

 

Transparent photovoltaics (TPVs) can be integrated into the surfaces of buildings and vehicles to provide point‐of‐use power without impacting aesthetics. Unlike TPVs that target the photon‐rich near‐infrared portion of the solar spectrum, TPVs that harvest ultraviolet (UV) photons can have significantly higher transparency and color neutrality, offering a superior solution for low‐power electronics with stringent aesthetic tolerance. In addition to being highly transparent and colorless, an ideal UV‐absorbing TPV should also be operationally stable and scalable over large areas while still outputting sufficient power for its specified application. None of today's TPVs meet all these criteria simultaneously. Here, the first UV‐absorbing TPV is demonstrated that satisfies all four criteria by using CsPbCl_2.5Br_0.5as the absorber. By precisely tuning the halide ratio during thermal co‐evaporation, high‐quality large‐area perovskite films can be accessed with an ideal absorption cutoff for aesthetic performance. The resulting TPVs exhibit a record average visible transmittance of 84.6% and a color rendering index of 96.5, while maintaining an output power density of 11 W m⁻²under one‐sun illumination. Further, the large‐area prototypes up to 25 cm²are demonstrated, that are operationally stable with extrapolated lifetimes of >20 yrs under outdoor conditions.

 

Transparent photovoltaics that harvest ultraviolet photons are promising point‐of‐use power sources for lower power applications, such as electrochromic windows that regulate the flow of visible and infrared photons for lighting and temperature regulation. Organic photovoltaic cells employing contorted hexabenzocoronene (cHBC) and its derivatives as chromophores have shown promise for transparent solar cells due to their high open‐circuit voltages, large‐area scalability, and high photoactive layer transparency. Here, the operational stability of such devices is investigated and it is found that the solar cell active layers that include peripherally halogenated chromophores undergo rapid morphological degradation during operation, while control cells employing cHBC and other non‐halogenated derivatives as donors with archetype C₇₀as an acceptor are highly stable. This study suggests halogenation of chromophores can play an outsized role in determining the operational stability of devices comprising them, which should be considered during the molecular design process.

 

Organic semiconductors (OSCs) have shown great promise in a variety of applications. Although solution processing of OSCs has resulted in high‐quality films, exquisite control of structural development to minimize defect formation during large‐scale fabrication remains formidable. Compounding this challenge is the use of halogenated organic solvents, which poses significant health and environmental hazards. However, the solvent‐free techniques introduced thus far impose additional limitations on solidification kinetics; the resulting OSC thin films are often more defective than those processed from solution. Here, a solvent‐free technique is reported to prepare OSC membranes with centimetric crystalline domains. Leveraging the tendency for liquid crystalline materials to preferentially orient, OSCs are “prealigned” by depositing them from the melt over a metal frame to form a freely suspended membrane. Crystallization from this prealigned phase affords membranes with unprecedented structural order across macroscopic distances. Field‐effect transistors comprising membranes of dioctyl[1]‐benzothieno[3,2‐b][1]benzothiophene (C8BTBT) and didodecyl[1]‐benzothieno[3,2‐b][1]benzothiophene (C12BTBT) having centimeter‐sized domains as active layers exhibit a hole mobility of ≈8.6 cm²V⁻¹s⁻¹, superseding the mobility of any transistors whose active layers are deposited from melt. This technique is scalable to yield membranes with large crystalline domains over wafer dimensions, making it amenable for broad applications in large‐area organic electronics.

 

Typical lead‐based perovskites solar cells show an onset of photogeneration around 800 nm, leaving plenty of spectral loss in the near‐infrared (NIR). Extending light absorption beyond 800 nm into the NIR should increase photocurrent generation and further improve photovoltaic efficiency of perovskite solar cells (PSCs). Here, a simple and facile approach is reported to incorporate a NIR‐chromophore that is also a Lewis‐base into perovskite absorbers to broaden their photoresponse and increase their photovoltaic efficiency. Compared with pristine PSCs without such an organic chromophore, these solar cells generate photocurrent in the NIR beyond the band edge of the perovskite active layer alone. Given the Lewis‐basic nature of the organic semiconductor, its addition to the photoactive layer also effectively passivates perovskite defects. These films thus exhibit significantly reduced trap densities, enhanced hole and electron mobilities, and suppressed illumination‐induced ion migration. As a consequence, perovskite solar cells with organic chromophore exhibit an enhanced efficiency of 21.6%, and substantively improved operational stability under continuous one‐sun illumination. The results demonstrate the potential generalizability of directly incorporating a multifunctional organic semiconductor that both extends light absorption and passivates surface traps in perovskite active layers to yield highly efficient and stable NIR‐harvesting PSCs.