Search for: All records

Fluids are known to trigger a broad range of slip events, from slow, creeping transients to dynamic earthquake ruptures. Yet, the detailed mechanics underlying these processes and the conditions leading to different rupture behaviors are not well understood. Here, we use a laboratory earthquake setup, capable of injecting pressurized fluids, to compare the rupture behavior for different rates of fluid injection, slow (megapascals per hour) versus fast (megapascals per second). We find that for the fast injection rates, dynamic ruptures are triggered at lower pressure levels and over spatial scales much smaller than the quasistatic theoretical estimates of nucleation sizes, suggesting that such fast injection rates constitute dynamic loading. In contrast, the relatively slow injection rates result in gradual nucleation processes, with the fluid spreading along the interface and causing stress changes consistent with gradually accelerating slow slip. The resulting dynamic ruptures propagating over wetted interfaces exhibit dynamic stress drops almost twice as large as those over the dry interfaces. These results suggest the need to take into account the rate of the pore-pressure increase when considering nucleation processes and motivate further investigation on how friction properties depend on the presence of fluids. 

Large, destructive earthquakes often propagate along thrust faults including megathrusts. The asymmetric interaction of thrust earthquake ruptures with the free surface leads to sudden variations in fault-normal stress, which affect fault friction. Here, we present full-field experimental measurements of displacements, particle velocities, and stresses that characterize the rupture interaction with the free surface, including the large normal stress reductions. We take advantage of these measurements to investigate the dependence of dynamic friction on transient changes in normal stress, demonstrate that the shear frictional resistance exhibits a significant lag in response to such normal stress variations, and identify a predictive frictional formulation that captures this effect. Properly accounting for this delay is important for simulations of fault slip, ground motion, and associated tsunami excitation.

 

We study how the asymmetric geometry of thrust faults affects the dynamics of supershear ruptures and their associated trailing Rayleigh ruptures as they interact with the free surface, and investigate the resulting near‐field ground motions. Earthquakes are mimicked by propagating laboratory ruptures along a frictional interface with a 61° dip angle. Using an experimental technique that combines ultrahigh‐speed photography with digital image correlation, we produce sequences of full‐field evolving measurements of particle displacements and velocities. Our full‐field measurement capability allows us to confirm and quantify the asymmetry between the experimental motions of the hanging and footwalls, with larger velocity magnitudes occurring at the hanging wall. Interestingly, because the motion of the hanging wall is generally near‐vertical, while that of the footwall is at dip direction shallower than the dip angle of the fault, the horizontal surface velocity components are found to be larger at the footwall than at the hanging wall. The attenuation in surface velocity with distance from the fault trace is generally larger at the hanging wall than at the footwall and it is more pronounced in the vertical component than in the horizontal one. Measurements of the rotations in surface motions confirm experimentally that the interaction of the rupture with the free surface can be interpreted through a torqueing mechanism that leads to reduction in normal stress near the free surface for thrust earthquakes. Nondimensional analysis shows that the experimental measurements are consistent with larger‐scale numerical simulations as well as field observations from thrust earthquakes.