Search for: All records

We explore the properties of interferometric data from high-redshift 21 cm measurements using the Murchison Widefield Array (MWA). These data contain the redshifted 21 cm signal, contamination from continuum foreground sources, and radiometric noise. The 21 cm signal from the Epoch of Reionization (EoR) is expected to be highly Gaussian, which motivates the use of the power spectrum as an effective statistical tool for extracting astrophysical information. We find that foreground contamination introduces non-Gaussianity into the distribution of measurements and then use this information to separate Gaussian from the non-Gaussian signal. We present improved upper limits on the 21 cm EoR power spectrum from the MWA using a Gaussian component of the data, based on the existing analysis from C. D. Nunhokee et al. 2025. This is extracted as the best-fitting Gaussian to the measured data. Our best 2σ (thermal+sample variance) limit for 268 hr of data improves from (30.2 mK)2 to (23.0 mK)2 at z = 6.5 for the East–West polarization, and from (39.2 mK)2 to (21.7 mK)2 = 470 mK2 in North–South. The best limits at z = 6.8 (z = 7.0) improve to P < (25.9 mK)2 (P < (32.0 mK)2) and k = 0.18h Mpc‑1 (k = 0.21h Mpc‑1). Results are compared with realistic simulations, which indicate that leakage from foreground contamination is a source of the non-Gaussian behavior. 

This paper presents the spherically averaged 21 cm power spectrum derived from Epoch of Reionization (EoR) observations conducted with the Murchison Widefield Array (MWA). The analysis uses EoR0-field data, centered at (R.A. = 0h, decl. = ‑27∘), collected between 2013 and 2023. Building on the improved methodology described in C. M. Trott et al. (2024), we incorporate additional data quality control techniques introduced in C. D. Nunhokee (2020). We report the lowest-power-level limits on the EoR power spectrum at redshifts z = 6.5, z = 6.8, and z = 7.0. These power levels, measured in the east–west polarization, are (30.2)2 mK2 at k = 0.18 h Mpc‑1, (31.2)2 mK2 at k = 0.18 h Mpc‑1, and (39.1)2 mK2 at k = 0.21 h Mpc‑1, respectively. The total integration time amounts to 268 hr. These results represent the deepest upper limits achieved by the MWA to date and provide the first evidence of the heated intergalactic medium at redshifts z = 6.5 to 7.0. 

Abstract 316L stainless steel (316L SS) is a flagship material for structural applications in corrosive environments, having been extensively studied for decades for its favorable balance between mechanical and corrosion properties. More recently, 316L SS has also proven to have excellent printability when parts are produced with additive manufacturing techniques, notably laser powder bed fusion (LPBF). Because of the harsh thermo-mechanical cycles experienced during rapid solidification and cooling, LPBF processing tends to generate unique microstructures. Strong heterogeneities can be found inside grains, including trapped elements, nano-inclusions, and a high density of dislocations that form the so-called cellular structure. Interestingly, LPBF 316L SS not only exhibits better mechanical properties than its conventionally processed counterpart, but it also usually offers much higher resistance to pitting in chloride solutions. Unfortunately, the complexity of the LPBF microstructures, in addition to process-induced defects, such as porosity and surface roughness, have slowed progress toward linking specific microstructural features to corrosion susceptibility and complicated the development of calibrated simulations of pitting phenomena. The first part of this article is dedicated to an in-depth review of the microstructures found in LPBF 316L SS and their potential effects on the corrosion properties, with an emphasis on pitting resistance. The second part offers a perspective of some relevant modeling techniques available to simulate the corrosion of LPBF 316L SS, including current challenges that should be overcome.