Search for: All records

The solvothermal synthetic exploration of the Bi–S–halogen phase space resulted in the synthesis of two bismuth sulfohalides with common structural motifs. Bi 13 S 18 I 2 was confirmed to have the previously reported composition and crystal structure. In contrast, the bromide analogue was shown to have a formula of neither Bi 19 S 27 Br 3 nor Bi 13 S 18 Br 2 , in contrast to the previous reports. The composition, refined from single crystal X-ray diffraction and confirmed by elemental analysis, high-resolution powder X-ray diffraction, and total scattering, is close to Bi 13 S 17 Br 3 due to the partial S/Br substitution in the framework. Bi 13 S 18 I 2 and Bi 13 S 17 Br 3 are n -type semiconductors with similar optical bandgaps of ∼0.9 eV but different charge and heat transport properties. Due to the framework S/Br disorder, Bi 13 S 17 Br 3 exhibits lower thermal and electrical conductivities than the iodine-containing analogue. The high Seebeck coefficients and ultralow thermal conductivities indicate that the reported bismuth sulfohalides are promising platforms to develop novel thermoelectric materials. 

A facile and universal route for synthesizing transition metal borides has been developed by reaction of boron triiodide (BI 3 ) with elemental transition metals. This method employs relatively low synthesis temperatures to afford single-phase samples of various binary and ternary metal borides, such as Fe 2 B, Co 2 B, Ni 3 B, TiB 2 , VB 2 , CrB 2 , and Ni 2 CoB. This synthesis protocol can be utilized for the topotactic transformation of metal shapes into their respective borides, as exemplified by transformation of Ni foam to Ni 3 B foam. In situ powder X-ray diffraction studies of the Ni–BI 3 system showed that the crystalline nickel borides, Ni 4 B 3 and Ni 2 B, start to form at temperatures as low as 700 K and 877 K, respectively, which is significantly lower than the typical synthesis temperatures required to produce these borides. Ni 3 B synthesized by this method was tested as a supporting material for oxygen evolution reaction (OER) in acidic media. Composite electrocatalysts of IrO 2 /Ni 3 B with only 50% of IrO 2 exhibit current densities and stability similar to pure IrO 2 at mass loadings lower than 0.5 mg cm −2 , indicating Ni 3 B could be a promising supporting material for acidic OER.