Search for: All records

Silver thin films have wide-ranging applications in optical coatings and optoelectronic devices. However, their poor wettability to substrates such as glass often leads to an island growth mode, known as the Volmer–Weber mode. This study demonstrates a method that utilizes a low-energy ion beam (IB) treatment in conjunction with magnetron sputtering to fabricate continuous silver films as thin as 6 nm. A single-beam ion source generates low-energy soft ions to establish a nominal 1 nm seed silver layer, which significantly enhances the wettability of the subsequently deposited silver films, resulting in a continuous film of approximately 6 nm with a resistivity as low as 11.4µΩ.cm. The transmittance spectra of these films were found to be comparable to simulated results, and the standard 100-grid tape test showed a marked improvement in adhesion to glass compared to silver films sputter-deposited without the IB treatment. High-resolution scanning electron microscopy images of the early growth stage indicate that the IB treatment promotes nucleation, while films without the IB treatment tend to form isolated islands. X-ray diffraction patterns indicate that the (111) crystallization is suppressed by the soft IB treatment, while growth of large crystals with (200) orientation is strengthened. This method is a promising approach for the fabrication of silver thin films with improved properties for use in optical coatings and optoelectronics.

 

Abstract A single-beam ion source was developed and used in combination with magnetron sputtering to modulate the film microstructure. The ion source emits a single beam of ions that interact with the deposited film and simultaneously enhances the magnetron discharge. The magnetron voltage can be adjusted over a wide range, from approximately 240 to 130 V, as the voltage of the ion source varies from 0 to 150 V, while the magnetron current increases accordingly. The low-voltage high-current magnetron discharge enables a ‘soft sputtering mode’, which is beneficial for thin-film growth. Indium tin oxide (ITO) thin films were deposited at room temperature using a combined single-beam ion source and magnetron sputtering. The ion beam resulted in the formation of polycrystalline ITO thin films with significantly reduced resistivity and surface roughness. Single-beam ion-source-enhanced magnetron sputtering has many potential applications in which low-temperature growth of thin films is required, such as coatings for organic solar cells. 

2D nickel phthalocyanine based MOFs (NiPc-MOFs) with excellent conductivity were synthesized through a solvothermal approach. Benefiting from excellent conductivity and a large surface area, 2D NiPc-MOF nanosheets present excellent electrocatalytic activity for nitrite sensing, with an ultra-wide linear concentration from 0.01 mM to 11 500 mM and a low detection limit of 2.3 μM, better than most reported electrochemical nitrite sensors. Significantly, this work reports the synthesis of 2D conductive NiPc-MOFs and develops them as electrochemical biosensors for non-enzymatic nitrite determination for the first time. 

Lithium metal batteries (LMBs) are considered the most promising energy storage devices for applications such as electrical vehicles owing to its tremendous theoretical capacity (3860 mAh g⁻¹). However, the serious safety issues and poor cycling performance caused by the dendritic crystal growth during deposition are concerned for any rechargeable batteries with a lithium metal anode. To make widespread adoption a possibility, considerable efforts have been devoted to suppressing lithium (Li) dendrite growth. In this review, the recent strategies to developing dendrite free Li anode, including constructing an artificial solid electrolyte interface, current collector modification, separator film improvement, and electrolyte additive, are summarized. The merits and shortcomings for different strategies are reviewed and a general summary and perspective on the next generation rechargeable batteries are presented.

image