Search for: All records

Abstract Two-dimensional carbides and nitrides, known as MXenes, are promising for water-processable coatings due to their excellent electrical, thermal, and optical properties. However, depositing hydrophilic MXene nanosheets onto inert or hydrophobic polymer surfaces requires plasma treatment or chemical modification. This study demonstrates a universal salt-assisted assembly method that produces ultra-thin, uniform MXene coatings with exceptional mechanical stability and washability on various polymers, including high-performance polymers for extreme temperatures. The salt in the Ti₃C₂T_xcolloidal suspension reduces surface charges, enabling electrostatically hydrophobized MXene deposition on polymers. A library of salts was used to optimize assembly kinetics and coating morphology. A 170 nm MXene coating can reduce radiation temperature by ~200 °C on a 300 °C PEEK substrate, while the coating on Kevlar fabric provides comfort in extreme conditions, including outer space and polar regions. 

Materials that undergo ion-insertion coupled electron transfer are important for energy storage, energy conversion, and optoelectronics applications. Cyclic voltammetry is a powerful technique to understand electrochemical kinetics. However, the interpretation of the kinetic behavior of ion insertion electrodes with analytical solutions developed for ion blocking electrodes has led to confusion about their rate-limiting behavior. The purpose of this manuscript is to demonstrate that the cyclic voltammetry response of thin film electrode materials undergoing solid-solution ion insertion without significant Ohmic polarization can be explained by well-established models for finite diffusion. To do this, we utilize an experimental and simulation approach to understand the kinetics of Li⁺insertion-coupled electron transfer into a thin film material (Nb₂O₅). We demonstrate general trends for the peak current vs scan rate behavior, with the latter parameter elevated to an exponent between limiting values of 1 and 0.5, depending on the solid-state diffusion characteristics of the film (diffusion coefficient, film thickness) and the experiment timescale (scan rate). We also show that values < 0.5 are possible depending on the cathodic potential limit. Our results will be useful to fundamentally understand and guide the selection and design of intercalation materials for multiple applications. 

Electrochemical ion insertion into transition metal oxides forms the foundation of several energy technologies. Transition metal oxides can exhibit sluggish ion transport and/or phase-transformation kinetics during ion insertion that can limit their performance at high rates (<10 min). In this study, we investigate the role of structural water in transition metal oxides during Li + insertion using staircase potentiostatic electrochemical impedance spectroscopy (SPEIS) and electrochemical quartz crystal microbalance (EQCM) analysis of WO 3 ·H 2 O and WO 3 thin-film electrodes. Overall, the presence of structural water in WO 3 ·H 2 O improves Li + insertion kinetics compared to WO 3 and leads to a less potential-dependent insertion process. Operando electrogravimetry and 3D Bode impedance analyses of nanostructured films reveal that the presence of structural water promotes charge accommodation without significant co-insertion of solvent, leading to our hypothesis that the electrochemically induced structural transitions of WO 3 hinder the electrode response at faster timescales (<10 min). Designing layered materials with confined fluids that exhibit less structural transitions may lead to more versatile ion-insertion hosts for next-generation electrochemical technologies.