Search for: All records

In Human-Robot Collaboration (HRC), robots and humans must work together in shared, overlapping, workspaces to accomplish tasks. If human and robot motion can be coordinated, then collisions between robot and human can seamlessly be avoided without requiring either of them to stop work. A key part of this coordination is anticipating humans’ future motion so robot motion can be adapted proactively. In this work, a generative neural network predicts a multi-step sequence of human poses for tabletop reaching motions. The multi-step sequence is mapped to a time-series based on a human speed versus motion distance model. The input to the network is the human’s reaching target relative to current pelvis location combined with current human pose. A dataset was generated of human motions to reach various positions on or above the table in front of the human starting from a wide variety of initial human poses. After training the network, experiments showed that the predicted sequences generated by this method matched the actual recordings of human motion within an L2 joint error of 7.6 cm and L2 link roll-pitch-yaw error of 0.301 radians on average. This method predicts motion for an entire reach motion without suffering from the exponential propagation of prediction error that limits the horizon of prior works. 

Industry 4.0 projects ubiquitous collaborative robots in smart factories of the future, particularly in assembly and material handling. To ensure efficient and safe human-robot collaborative interactions, this paper presents a novel algorithm for estimating Risk of Passage (ROP) a robot incurs by passing between dynamic obstacles (humans, moving equipment, etc.). This paper posits that robot trajectory durations will be shorter and safer if the robot can react proactively to predicted collision between a robot and human worker before it occurs, compared to reacting when it is imminent. I.e., if the risk that obstacles may prohibit robot passage at a future time in the robot’s trajectory is greater than a user defined risk limit, then an Obstacle Pair Volume (OPV), encompassing the obstacles at that time, is added to the planning scene. Results found from simulation show that an ROP algorithm can be trained in ∼120 workcell cycles. Further, it is demonstrated that when a trained ROP algorithm introduces an OPV, trajectory durations are shorter compared to those avoiding obstacles without the introduction of an OPV. The use of ROP estimation with addition of OPV allows workcells to operate proactively smoother with shorter cycle times in the presence of unforeseen obstacles. 

Abstract To enable safe and effective human–robot collaboration (HRC) in smart manufacturing, seamless integration of sensing, cognition, and prediction into the robot controller is critical for real-time awareness, response, and communication inside a heterogeneous environment (robots, humans, and equipment). The specific research objective is to provide the robot Proactive Adaptive Collaboration Intelligence (PACI) and switching logic within its control architecture in order to give the robot the ability to optimally and dynamically adapt its motions, given a priori knowledge and predefined execution plans for its assigned tasks. The challenge lies in augmenting the robot’s decision-making process to have greater situation awareness and to yield smart robot behaviors/reactions when subject to different levels of human–robot interaction, while maintaining safety and production efficiency. Robot reactive behaviors were achieved via cost function-based switching logic activating the best suited high-level controller. The PACI’s underlying segmentation and switching logic framework is demonstrated to yield a high degree of modularity and flexibility. The performance of the developed control structure subjected to different levels of human–robot interactions was validated in a simulated environment. Open-loop commands were sent to the physical e.DO robot to demonstrate how the proposed framework would behave in a real application. 

To enable safe and effective human-robot collaboration (HRC) in smart manufacturing, seamless integration of sensing, cognition and prediction into the robot controller is critical for real-time awareness, response and communication inside a heterogeneous environment (robots, humans, equipment). The specific research objective is to provide the robot Proactive Adaptive Collaboration Intelligence (PACI) and switching logic within its control architecture in order to give the robot the ability to optimally and dynamically adapt its motions, given a priori knowledge and predefined execution plans for its assigned tasks. The challenge lies in augmenting the robot’s decision-making process to have greater situation awareness and to yield smart robot behaviors/reactions when subject to different levels of human-robot interaction, while maintaining safety and production efficiency. Robot reactive behaviors were achieved via cost function-based switching logic activating the best suited high-level controller. The PACI’s underlying segmentation and switching logic framework is demonstrated to yield a high degree of modularity and flexibility. The performance of the developed control structure subjected to different levels of human-robot interactions was validated in a simulated environment. Open-loop commands were sent to the physical e.DO robot to demonstrate how the proposed framework would behave in a real application.