Search for: All records

The measurement of sea ice elevation above sea level or the “freeboard” depends upon an accurate retrieval of the local sea level. The local sea level has been previously retrieved from altimetry data alone by the lowest elevation method, where the percentage of the lowest elevations over a particular segment length scale was used. Here, we provide an evaluation of the scale dependence on these local sea level retrievals using data from NASA Operation IceBridge (OIB) which took place in the Ross Sea in 2013. This is a unique dataset of laser altimeter measurements over five tracks from the Airborne Topographic Mapper (ATM), with coincidently high-spatial resolution images from the Digital Mapping System (DMS), that allows for an independent sea level validation. The local sea level is first calculated by using the mean elevation of ATM L1B data over leads identified by using the corresponding DMS imagery. The resulting local sea level reference is then used as ground truth to validate the local sea levels retrieved from ATM L2 by using nine different percentages of the lowest elevation (0.1%, 0.5%, 1%, 1.5%, 2%, 2.5%, 3%, 3.5%, and 4%) at seven different segment length scales (1, 5, 10, 15, 20, 25, and 50 km) for each of the five ATM tracks. The closeness to the 1:1 line, R2, and root mean square error (RMSE) is used to quantify the accuracy of the retrievals. It is found that all linear least square fits are statistically significant (p < 0.05) using an F test at every scale for all tested data. In general, the sea level retrievals are farther away from the 1:1 line when the segment length scale increases from 1 or 5 to 50 km. We find that the retrieval accuracy is affected more by the segment length scale than the percentage scale. Based on our results, most retrievals underestimate the local sea level; the longer the segment length (from 1 to 50 km) used, especially at small percentage scales, the larger the error tends to be. The best local sea level based on a higher R2 and smaller RMSE for all the tracks combined is retrieved by using 0.1–2% of the lowest elevations at the 1–5 km segment lengths. 

High sea ice production (SIP) generates high-salinity water, thus, influencing the global thermohaline circulation. Estimation from passive microwave data and heat flux models have indicated that the Ross Ice Shelf polynya (RISP) may be the highest SIP region in the Southern Oceans. However, the coarse spatial resolution of passive microwave data limited the accuracy of these estimates. The Sentinel-1 Synthetic Aperture Radar dataset with high spatial and temporal resolution provides an unprecedented opportunity to more accurately distinguish both polynya area/extent and occurrence. In this study, the SIPs of RISP and McMurdo Sound polynya (MSP) from 1 March–30 November 2017 and 2018 are calculated based on Sentinel-1 SAR data (for area/extent) and AMSR2 data (for ice thickness). The results show that the wind-driven polynyas in these two years occurred from the middle of March to the middle of November, and the occurrence frequency in 2017 was 90, less than 114 in 2018. However, the annual mean cumulative SIP area and volume in 2017 were similar to (or slightly larger than) those in 2018. The average annual cumulative polynya area and ice volume of these two years were 1,040,213 km2 and 184 km3 for the RSIP, and 90,505 km2 and 16 km3 for the MSP, respectively. This annual cumulative SIP (volume) is only 1/3–2/3 of those obtained using the previous methods, implying that ice production in the Ross Sea might have been significantly overestimated in the past and deserves further investigations.