Search for: All records

Produced water (PW) is the largest waste stream associated with oil and gas (O&G) operations and contains petroleum hydrocarbons, heavy metals, salts, naturally occurring radioactive materials and any remaining chemical additives. In some areas in Wyoming, constructed wetlands (CWs) are used to polish PW downstream of National Pollutant Discharge Elimination System (NPDES) PW release points. In recent years, there has been increased interest in finding lower cost options, such as CWs, for PW treatment. The goal of this study was to understand the efficacy of removal and environmental fate of O&G organic chemical additives in CW systems used to treat PW released for agricultural beneficial reuse. To achieve this goal, we analyzed water and sediment samples for organic O&G chemical additives and conducted 16S rRNA gene sequencing for microbial community characterization on three such systems in Wyoming, USA. Three surfactants (polyethylene glycols, polypropylene glycols, and nonylphenol ethoxylates) and one biocide (alkyldimethylammonium chloride) were detected in all three PW discharges and >94% removal of all species from PW was achieved after treatment in two CWs in series. These O&G extraction additives were detected in all sediment samples collected downstream of PW discharges. Chemical and microbial analyses indicated that sorption and biodegradation were the main attenuation mechanisms for these species. Additionally, all three discharges showed a trend of increasingly diverse, but similar, microbial communities with greater distance from NPDES PW discharge points. Results of this study can be used to inform design and management of constructed wetlands for produced water treatment. 

Oil and gas (O&G) extraction generates large volumes of produced water (PW) in regions that are often water-stressed. In Wyoming, generators are permitted under the National Pollutant Discharge Elimination System (NPDES) program to discharge O&G PW for beneficial use. In one Wyoming study region, downstream of the NPDES facilities exist naturally occurring wetlands referred to herein as produced water retention ponds (PWRPs). Previously, it was found that dissolved radium (Ra) and organic contaminants are removed within 30 km of the discharges and higher-resolution sampling was required to understand contaminant attenuation mechanisms. In this study, we sampled three NPDES discharge facilities, five PWRPs, and a reference background wetland not impacted by O&G PW disposal. Water samples, grab sediments, sediment cores and vegetation were collected. No inorganic PW constituents were abated through the PWRP series but Ra was shown to accumulate within PWRP grab sediments, upwards of 2721 Bq kg −1 , compared to downstream sites. Ra mineral association with depth in the sediment profile is likely controlled by the S cycle under varying microbial communities and redox conditions. Under anoxic conditions, common in wetlands, Ra was available as an exchangeable ion, similar to Ca, Ba and Sr, and S was mostly water-soluble. 226 Ra concentration ratios in vegetation samples, normalizing vegetation Ra to sediment Ra, indicated that ratios were highest in sediments containing less exchangeable 226 Ra. Sequential leaching data paired with redox potentials suggest that oxic conditions are necessary to contain Ra in recalcitrant sediment minerals and prevent mobility and bioavailability. 

While development of the Utica/Point Pleasant Shale (UPP) is extensive in Ohio (U.S.) and increasing in Pennsylvania and West Virginia, few studies report the chemistry of produced waters from UPP wells. These data have important implications for developing best management practices for handling and waste disposal, or identifying the fluid in the event of accidental spill events. Here, we evaluated the elemental and isotope chemistry of UPP produced waters from 26 wells throughout Ohio, Pennsylvania, and West Virginia to determine any unique fluid chemistries that could be used for forensic studies. Compared to the Marcellus, UPP produced waters contain higher activities of total radium ( 226 Ra + 228 Ra) and higher 228 Ra/ 226 Ra ratios. As with the Marcellus Shale, elemental ratios (Sr/Ca) and isotope ratios ( 87 Sr/ 86 Sr) can distinguish UPP produced waters from many conventional oil and gas formations. Sr/Ca and 87 Sr/ 86 Sr ratios can fingerprint small fractions (∼0.1%) of UPP produced water in freshwater. However, because Marcellus and UPP produced waters display similar major elemental chemistry ( i.e. , Na, Ca, and Cl) and overlapping ratios of Sr/Ca and 87 Sr/ 86 Sr, 228 Ra/ 226 Ra ratios may be the best tracer to distinguish these waters. 

Accurate and precise analyses of oil and gas (O&G) wastewaters and solids ( e.g. , sediments and sludge) are important for the regulatory monitoring of O&G development and tracing potential O&G contamination in the environment. In this study, 15 laboratories participated in an inter-laboratory comparison on the chemical characterization of three O&G wastewaters from the Appalachian Basin and four solids impacted by O&G development, with the goal of evaluating the quality of data and the accuracy of measurements for various analytes of concern. Using a variety of different methods, analytes in the wastewaters with high concentrations ( i.e. , >5 mg L −1 ) were easily detectable with relatively high accuracy, often within ±10% of the most probable value (MPV). In contrast, often less than 7 of the 15 labs were able to report detectable trace metal(loid) concentrations ( i.e. , Cr, Ni, Cu, Zn, As, and Pb) with accuracies of approximately ±40%. Despite most labs using inductively coupled plasma mass spectrometry (ICP-MS) with low instrument detection capabilities for trace metal analyses, large dilution factors during sample preparation and low trace metal concentrations in the wastewaters limited the number of quantifiable determinations and likely influenced analytical accuracy. In contrast, all the labs measuring Ra in the wastewaters were able to report detectable concentrations using a variety of methods including gamma spectroscopy and wet chemical approaches following Environmental Protection Agency (EPA) standard methods. However, the reported radium activities were often greater than ±30% different to the MPV possibly due to calibration inconsistencies among labs, radon leakage, or failing to correct for self-attenuation. Reported radium activities in solid materials had less variability (±20% from MPV) but accuracy could likely be improved by using certified radium standards and accounting for self-attenuation that results from matrix interferences or a density difference between the calibration standard and the unknown sample. This inter-laboratory comparison illustrates that numerous methods can be used to measure major cation, minor cation, and anion concentrations in O&G wastewaters with relatively high accuracy while trace metal(loid) and radioactivity analyses in liquids may often be over ±20% different from the MPV.