Case hooks are tools used in distribution centers by selectors to help them reach and pull products located on the back half of a pallet. This study investigated the postural, electromyographic, and usability responses as 4 handle and 3 tip types were used to pull cases forward on a pallet. The data suggest the pistol grip may be most biomechanically advantageous. With the pistol grip, the rake and conventional tips worked well and had good usability scores.
Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher.
Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?
Some links on this page may take you to non-federal websites. Their policies may differ from this site.
-
-
Many warehouse slotting algorithms have overlooked worker ergonomics. This research aimed to develop ergonomics slotting guidelines based upon the back and shoulder postures and electromyographic (EMG) responses of the deltoid and erector spinae muscles when individual items are picked from, or full cases replenished to, different shelf heights In the first study of two studies, participants lifted small items representative of piece-pick tasks from seven shelf heights. In the second study, participants performed a simulated full case replenishment task in which they lifted boxes weighing between 2.7 and 10.9 kg from a cart into a flow rack. Shelf height significantly affected all postural and EMG variables and there was a trade-off between back and shoulder muscle activity across the varying shelf heights. Together, these studies were used to develop some general ergonomic slotting guidelines that could be implemented to reduce biomechanical load exposures experienced by distribution center workers.more » « less
-
null (Ed.)The objective of this study was to test the feasibility of using a pair of wearable inertial measurement unit (IMU) sensors to accurately capture dynamic joint motion data during simulated occupational conditions. Eleven subjects (5 males and 6 females) performed repetitive neck, low-back, and shoulder motions simulating low- and high-difficulty occupational tasks in a laboratory setting. Kinematics for each of the 3 joints were measured via IMU sensors in addition to a “gold standard” passivemarker optical motion capture system. The IMU accuracy was benchmarked relative to the optical motion capture system, and IMU sensitivity to low- and high-difficulty tasks was evaluated. The accuracy of the IMU sensors was found to be very good on average, but significant positional drift was observed in some trials. In addition, IMU measurements were shown to be sensitive to differences in task difficulty in all 3 joints (P < .05). These results demonstrate the feasibility for using wearable IMU sensors to capture kinematic exposures as potential indicators of occupational injury risk. Velocities and accelerations demonstrate the most potential for developing risk metrics since they are sensitive to task difficulty and less sensitive to drift than rotational position measurements.more » « less
-
null (Ed.)One-handed picking tasks are frequently performed when workers are picking small products or smaller quantities of products to fulfill customer orders. Many slotting models have been developed that minimize travel distance based on individual item order frequencies. None of these models have considered the biomechanical costs associated with the item selection process. This project aimed to quantify the physical demands on the back and shoulders as participants performed simulated picking tasks from different shelf heights. In this study, 17 female participants lifted items of two different weights (0.45 and 0.90 kg) from seven shelf heights ( 10.8, 37.1, 63.5, 89.9, 116.2, 142.6, 168.9 cm) and either walked one step prior to picking up the item (lifting task 1) or lifted the item without needing to take a step (lifting task 2). Dependent measures included 90th percentile electro-myographic (EMG) signals from the anterior and lateral deltoid muscles, and the erector spinae muscles, as well as spine and shoulder kinematics, and task durations. EMG data were normalized to maximal voluntary exertions. The results indicated that shelf height has significant effect on the time required to complete both task 1 and task 2. The time of complete task 1, with the one meter travel, is larger than the time to complete task 2 at each layer, and time difference between tasks is relatively consistent, the average of which is 0.75 seconds. The lifting time for shelf heights from 63.5 to 116.2 cm is relatively shorter compared with that at lower and higher shelves. The total time for walking and lifting varies by nearly half a second between the slowest and fastest conditions. This study provides data that can be used to develop slotting guidelines for piece pick operations in distribution centers. Complimentary data are still needed for the full case replenishment tasks to ensure the ergonomic needs of those working the back side of the flow rack are also considered.more » « less