Search for: All records

Abstract The coloration mechanism of Oregon sunstone is a classic and controversial topic in mineralogy because of the unique coexistence of anisotropic (green-red) and isotropic (red) color zones within single feldspar crystals. After nearly 50 years of research, no models proposed to date have satisfactorily accounted for all observed optical phenomena. Here, we present high-resolution transmission electron microscopy analyses of samples prepared by focused ion beam extraction along specific crystal directions. In both the anisotropic and the isotropic color zones, we observed Cu nanoparticles (NPs) included within plagioclase but with different geometries. In the isotropic (red) zone, NPs were randomly distributed nano-spheres or nano-ellipsoids (8.7–12 nm in diameter) with an aspect ratio of 1–1.3. In contrast, in dichroic (green/red) zones, NPs were directionally aligned nano-rods (8.5–21 nm along the long axis) with an aspect ratio of ∼2.5. We applied localized surface plasmon resonance (LSPR) theory to simulate absorption spectra and developed a model to explain the observed optical properties. LA-ICP-MS and polarized UV-Vis spectroscopy were also performed to confirm our conclusions. This study systematically reveals the existence and optical influence of variably shaped metal-NP inclusions in feldspar crystals. Furthermore, it demonstrates the necessity of including LSPR in the canon of mineral coloration mechanisms. Cu-NP-bearing labradorite has been shown to exhibit third-order nonlinear optical properties, and approaches that incorporate NP shapes and sizes will assist in designing NP-embedded optical materials with tailored optical properties. 

Abstract Studies suggest that feitknechtite (β-MnOOH) is a prevalent, and perhaps necessary, intermediate phase during the synthesis of birnessite-like phases, the abiotic oxidation of Mn2+, and the transformation of biogenic hexagonal phyllomanganates to more complex Mn oxides in laboratory and natural systems. Researchers have generally described feitknechtite as consisting of pyrochroite-like (or cadmium iodide-like) Mn-O octahedral layers, but a detailed crystal structure has not been reported. We used TEM/SAED and powder XRD and Rietveld refinements to derive the unit cell and, for the first time, report a complete structure description for feitknechtite (β-MnOOH). Rietveld refinements were also completed for three natural feitknechtite/hausmannite samples, and time-resolved synchrotron XRD experiments were used to follow the thermal transformation of feitknechtite to hausmannite. Additionally, we identified and report the structure for a second, and perhaps novel, MnOOH polymorph (proposed designation ε-MnOOH), mixed with the synthetic feitknechtite, that is similar to β-MnOOH but with a different layer stacking. 

Abstract The crystallization of hematite from precursor ferrihydrite was studied using time-resolved, angle-dispersive synchrotron X-ray diffraction in aqueous solutions at pH 10 and 11 and at temperatures ranging from 80 to 170 °C. Rietveld analyses revealed a non-classical crystallization pathway involving vacancy infilling by Fe as defective hematite nanocrystals evolved. At 90 °C and pH 11, incipient hematite particles exhibited an Fe site occupancy as low as 0.68(2), and after 30 min, Fe occupancy plateaued at 0.84(1), achieving a metastable steady state with a composition corresponding to “hydrohematite.” During crystal growth, unit-cell volume increased with an increase in Fe occupancy. The increase in Fe occupancy in hydrohematite was accomplished by deprotonation, resulting in a shortening of the long Fe-O(H) bonds and decreased distortion of the octahedral sites. Once the occupancy stabilized, the unit-cell volume contracted following further nanoparticle growth. Our study documented various synthetic routes to the formation of “hydrohematite” with an Fe vacancy of 10–20 mol% in the final product. The structure refined for synthetic hydrohematite at 90 °C and pH 11 closely matched that of natural hydrohematite from Salisbury, Connecticut, with a refined Fe occupancy of 0.83(2). Dry heating this natural hydrohematite generated anhydrous, stoichiometric hematite, again by continuous infilling of vacancies. The transformation initiated at 150 °C and was complete at 700 °C, and it was accompanied by the formation of a minor amorphous phase that served as a reservoir for Fe during the inoculation of the defective crystalline phase. 

Abstract In this study, we investigated an unusual natural Mn oxide hollandite-group mineral from the Kohare Mine, Iwate Prefecture, Japan, that has predominantly water molecules in the tunnels, with K, Na, Ca, and Ba. The specimens are labeled as type manjiroite, but our analyses show that Na is not the dominant tunnel species, nor is it even the primary tunnel cation, suggesting either an error in the original analyses or significant compositional variation within samples from the type locality. Chemical analyses, X-ray photoelectron spectroscopy, and thermal gravimetric analysis measurements combined with Rietveld refinement results using synchrotron X-ray powder diffraction data suggest the chemical formula: (K0.19Na0.17Ca0.03Ba0.01H2O1.60)(Mn5.024+Mn2.823+Al0.14Fe0.02)O13.47(OH)2.53. Our analyses indicate that water is the primary tunnel species, and although water has been reported as a component in natural hollandites, this is the first detailed study of the crystal structure and dehydration behavior of a natural hydrous hollandite with water as the predominant tunnel species. This work underscores the rarity of natural Na-rich hollandite phases and focuses new attention on the role of hydrous components of hollandite-like phases in determining their capacities to exchange or accommodate various cations, such as Li+, Na+, Ba2+, Pb2+, and K+ in natural systems. 

Abstract Water can be stored in nominally anhydrous minerals as substitutional hydroxyl, generating vast but commonly unrecognized H2O reservoirs in ostensibly dry regimes. Researchers have long known that hematite (α-Fe2O3) can accommodate small concentrations of hydroxyl through the substitution of Fe3+ by 3H+. Our study of natural hematite has demonstrated the occurrence of “hydrohematite” phases that are 10–20 mol% deficient in Fe and accordingly contain 3.6–7.8 mol% structural water. Intergrown with natural hydrohematite samples were superhydrous goethite-like phases exhibiting an Fe deficiency of 10–20 mol% relative to end-member goethite (α-FeOOH). We synthesized hydrohematite in alkaline solutions (pH 9–12) at low temperatures (T < 200 °C) using fresh ferrihydrite as the transient precursor, and we observed a nonclassical crystallization pathway involving vacancy inoculation by Fe as nanocrystals evolved. The high level of incorporation of H2O in iron (hydr)oxides dramatically alters their behaviors as catalysts and pigments, and the presence of hydrohematite in rocks may rule out high-T diagenesis. We propose that hydrohematite is common in low-T occurrences of Fe oxide on Earth, and by extension it may inventory large quantities of water in apparently arid planetary environments, such as the surface of Mars. 

Abstract Raman spectra were collected for an extensive set of well-characterized layer-structure Mn oxide mineral species (phyllomanganates) employing a range of data collection conditions. We show that the application of various laser wavelengths, such as 785, 633, and 532 nm, at low power levels (30–500 μW) in conjunction with the comprehensive database of standard spectra presented here, makes it possible to distinguish and identify the various phyllomanganate minerals. The Raman mode relative intensities can vary significantly as a function of crystal orientation relative to the incident laser light polarization direction as well as incident laser light wavelength. Consequently, phase identification success is enhanced when using a standards database that includes multiple spectra collected for different crystal orientations and with different laser light wavelengths. The position of the highest frequency Raman mode near 630–665 cm–1 shows a strong linear correlation with the fraction of Mn3+ in the octahedral Mn sites. With the comprehensive Raman database of well-characterized Mn oxide standards provided here (and available online as Online Material1), and use of appropriate data collection conditions, micro-Raman is a powerful tool for identification and characterization of biotic and abiotic Mn oxide phases from diverse natural settings, including on other planets, as well as for laboratory and industrial materials.