Search for: All records

Abstract Hybrid magnonic systems are a newcomer for pursuing coherent information processing owing to their rich quantum engineering functionalities. One prototypical example is hybrid magnonics in antiferromagnets with an easy-plane anisotropy that resembles a quantum-mechanically mixed two-level spin system through the coupling of acoustic and optical magnons. Generally, the coupling between these orthogonal modes is forbidden due to their opposite parity. Here we show that the Dzyaloshinskii–Moriya-Interaction (DMI), a chiral antisymmetric interaction that occurs in magnetic systems with low symmetry, can lift this restriction. We report that layered hybrid perovskite antiferromagnets with an interlayer DMI can lead to a strong intrinsic magnon-magnon coupling strength up to 0.24 GHz, which is four times greater than the dissipation rates of the acoustic/optical modes. Our work shows that the DMI in these hybrid antiferromagnets holds promise for leveraging magnon-magnon coupling by harnessing symmetry breaking in a highly tunable, solution-processable layered magnetic platform. 

Abstract Solution‐processed metal halide perovskite (MHP) single crystals (SCs) are in high demand for a growing number of printed electronic applications due to their superior optoelectronic properties compared to polycrystalline thin films. There is an urgent need to make SC fabrication facile, scalable, and compatible with the printed electronic manufacturing infrastructure. Here, a universal cosolvent evaporation (CSE) strategy is presented by which perovskite SCs and arrays are produced directly on substrates via printing and coating methods within minutes at room temperature from drying droplets. The CSE strategy successfully guides the supersaturation via controlled drying of droplets to suppress all crystallization pathways but one, and is shown to produce SCs of a wide variety of 3D, 2D, and mixed‐cation/halide perovskites with consistency. This approach works with commonly used precursors and solvents, making it universal. Importantly, the SC consumes the precursor in the droplet, which enables the large‐scale fabrication of SC arrays with minimal residue. Direct on‐chip fabrication of 3D and 2D perovskite photodetector devices with outstanding performance is demonstrated. The approach shows that any MHP SC can now be manufactured on substrates using precision printing and scalable, high‐throughput coating methods. 

Abstract Lead halide perovskites have recently attracted intensive attention as competitive alternative candidates of legacy compound materials CdTe, CdZnTe, and TlBr for high sensitivity energy‐resolving gamma‐ray detection at room temperature. However, the use of lead in these lead halide perovskites, which is necessary for increasing the stopping power of gamma radiation, poses a serious environmental concern due to the high toxicity of lead. In this regard, environmental‐friendly perovskite‐based gamma‐ray detector materials with key energy‐resolving capabilities are highly desired. Here, the gamma energy‐resolving performance of a new class of all‐inorganic and lead‐free Cs₂AgBiBr₆double perovskite single crystals (SCs) is reported. Two types of Cs₂AgBiBr₆SCs, prepared by Bi‐normal and Bi‐poor precursor solutions, respectively, have been grown. Their mobilities and response to gamma radiation are presented. Density of trap states in Bi‐poor Cs₂AgBiBr₆SCs (2.65 × 10⁹ cm⁻³) is one order of magnitude lower than that in Bi‐normal Cs₂AgBiBr₆SCs (3.85 × 10¹⁰ cm⁻³). Using laser‐induced photocurrent measurements, the obtained mobility–lifetime (μ–τ) product in Bi‐poor Cs₂AgBiBr₆SCs is 1.47 × 10⁻³ cm² V⁻¹, indicating their great potentials for gamma‐ray detection. Further, the fabricated detector based on Bi‐poor Cs₂AgBiBr₆SC shows response to 59.5 keV gamma‐ray with an energy resolution of 13.91%. 

The vast chemical space of emerging semiconductors, like metal halide perovskites, and their varied requirements for semiconductor applications have rendered trial-and-error environmentally unsustainable. In this work, we demonstrate RoboMapper, a materials acceleration platform (MAP), that achieves 10-fold research acceleration by formulating and palletizing semiconductors on a chip, thereby allowing high-throughput (HT) measurements to generate quantitative structure-property relationships (QSPRs) considerably more efficiently and sustainably. We leverage the RoboMapper to construct QSPR maps for the mixed ion FA 1-y Cs y Pb(I 1-x Br x ) 3 halide perovskite in terms of structure, bandgap, and photostability with respect to its composition. We identify wide-bandgap alloys suitable for perovskite-Si hybrid tandem solar cells exhibiting a pure cubic perovskite phase with favorable defect chemistry while achieving superior stability at the target bandgap of 1.7 eV. RoboMapper’s palletization strategy reduces environmental impacts of data generation in materials research by more than an order of magnitude, paving the way for sustainable data-driven materials research. 

Perovskite solar cells (PSCs) consisting of interfacial two- and three-dimensional heterostructures that incorporate ammonium ligand intercalation have enabled rapid progress toward the goal of uniting performance with stability. However, as the field continues to seek ever-higher durability, additional tools that avoid progressive ligand intercalation are needed to minimize degradation at high temperatures. We used ammonium ligands that are nonreactive with the bulk of perovskites and investigated a library that varies ligand molecular structure systematically. We found that fluorinated aniliniums offer interfacial passivation and simultaneously minimize reactivity with perovskites. Using this approach, we report a certified quasi–steady-state power-conversion efficiency of 24.09% for inverted-structure PSCs. In an encapsulated device operating at 85°C and 50% relative humidity, we document a 1560-hourT₈₅at maximum power point under 1-sun illumination.