An official website of the United States government
Asymmetric hillslope erosion following wildfire in Fourmile Canyon, Colorado: asymetric hillslope erosion wildfire fourmile canyon
- Award ID(s):
- 1401260
- PAR ID:
- 10054253
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Earth Surface Processes and Landforms
- Volume:
- 43
- Issue:
- 9
- ISSN:
- 0197-9337
- Page Range / eLocation ID:
- 2009 to 2021
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract The connection between topography and erosion rate is central to understanding landscape evolution and sediment hazards. However, investigation of this relationship in steep landscapes has been limited due to expectations of: (a) decoupling between erosion rate and “threshold” hillslope morphology; and (b) bias in detrital cosmogenic nuclide erosion rates due to deep‐seated landslides. Here we compile 120 new and published10Be erosion rates from catchments in the San Gabriel Mountains, California, and show that hillslope morphology and erosion rate are coupled for slopes approaching 50° due to progressive exposure of bare bedrock with increasing erosion rate. We find no evidence for drainage area dependence in10Be erosion rates in catchments as small as 0.09 km2, and we show that landslide deposits influence erosion rate estimates mainly by adding scatter. Our results highlight the potential and importance of sampling small catchments to better understand steep hillslope processes.more » « less
-
The Chaos Canyon landslide, which collapsed on the afternoon of 28 June 2022 in Rocky Mountain National Park, presents an opportunity to evaluate instabilities within alpine regions faced with a warming and dynamic climate. Video documentation of the landslide was captured by several eyewitnesses and motivated a rapid field campaign. Initial estimates put the failure area at 66 630 m2, with an average elevation of 3555 m above sea level. We undertook an investigation of previous movement of this landslide, measured the volume of material involved, evaluated the potential presence of interstitial ice and snow within the failed deposit, and examined potential climatological impacts on the collapse of the slope. Satellite radar and optical measurements were used to calculate deformation of the landslide in the 5 years leading up to collapse. From 2017 to 2019, the landslide moved ∼5 m yr−1, accelerating to 17 m yr−1 in 2019. Movement took place through both internal deformation and basal sliding. Climate analysis reveals that the collapse took place during peak snowmelt, and 2022 followed 10 years of higher than average positive degree day sums. We also made use of slope stability modeling to test what factors controlled the stability of the area. Models indicate that even a small increase in the water table reduces the factor of safety to <1, leading to failure. We posit that a combination of permafrost thaw from increasing average temperatures, progressive weakening of the basal shear zone from several years of movement, and an increase in pore-fluid pressure from snowmelt led to the 28 June collapse. Material volumes were estimated using structure from motion (SfM) models incorporating photographs from two field expeditions on 8 July 2022 – 10 d after the slide. Detailed mapping and SfM models indicate that ∼1 258 000 ± 150 000 m3 of material was deposited at the slide toe and ∼1 340 000 ± 133 000 m3 of material was evacuated from the source area. The Chaos Canyon landslide may be representative of future dynamic alpine topography, wherein slope failures become more common in a warming climate.more » « less
-
Abstract Chemical erosion is of wide interest due to its influence on topography, nutrient supply to streams and soils, sediment composition, and Earth's climate. While controls on chemical erosion rate have been studied extensively in steady‐state models, few studies have explored the controls on chemical erosion rate during transient responses to external perturbations. Here we develop a numerical model for the coevolution of soil‐mantled topography, soil thickness, and soil mineralogy, and we use it to simulate responses to step changes in rates of rock uplift, soil production, soil transport, and mineral dissolution. These simulations suggest that tectonic and climatic perturbations can generate responses in soil chemical erosion rate that differ in speed, magnitude, and spatial pattern and that climatic and tectonic perturbations may impart distinct signatures on hillslope mass fluxes, soil chemistry, and sediment composition. The response time of chemical erosion rate is dominantly controlled by hillslope length and is secondarily modulated by rates of rock uplift, soil production, transport, and mineral dissolution. This strong dependence on drainage density implies that a landscape's chemical erosion response should depend on the relative efficiencies of river incision and soil transport and thus may be mediated by climatic and biological factors. The simulations further suggest that the timescale of the hillslope response may be long relative to that of river channel profiles, implying that chemical erosion response times may be limited more by the sluggishness of the hillslopes than by the rate of signal propagation through river channel profiles.more » « less
-
This paper investigates the use of environmentally friendly remediation materials and techniques for rain-induced post-wildfire soil erosion on burned slopes. During wildfires, vegetation and organic matter combust and release hydrophobic chemicals on soil grains. Hydrophobicity reduces the water infiltration rate, prolongs the wetting process, increases erosion, and causes severe debris flows over watersheds. This comparative study presents the most effective approaches for mitigating hydrophobicity effects through environmentally friendly biopolymers and surfactants. Experimental techniques evaluate the dynamics of water drop penetration into treated and untreated soil, downhill water drop mobility, and erosion. The waterdrop contact angle measurements indicate that biopolymer Xanthan Gum (XG) slightly reduces hydrophobicity, whereas surfactant Sodium Cocoyl Isethionate (SCI) reduces it by a factor of a thousand. In addition, SCI can decrease slope erosion at low-inclined and moderate-inclined slopes. Sands' infiltration rates (IR) are very fast due to high permeability in normal conditions; however, surface hydrophobicity significantly reduces IR. Results from artificially treated extremely water-repellent samples of mixed sand show a six orders of magnitude decrease in IR. Then, after treatments XG and SCI modifiers, the IR increased by an order of magnitude after the XG treatments, and by four orders of magnitude under SCI treatment. Although XG is wettable and attractive to water, the crust and webs it forms between sand particles prevent effective water infiltration. Mild slopes exhibit similar IR rates as horizontal surfaces for all the cases; however, steeper slopes reduce IR for treated hydrophobic soils because they allow for downhill motion of water that is faster relative to the infiltration speed.more » « less
