skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Throughput enhancement of parallel step emulsifier devices by shear-free and efficient nozzle clearance
Step emulsification is an attractive method for production of monodisperse drops. Its main advantage is the ability to parallelize many step emulsifier nozzles to achieve high production rates. However, step emulsification is sensitive to any obstructions at the nozzle exit. At high production rates, drops can accumulate at nozzle exits, disturb the formation of subsequent drops and impair monodispersity. As a result, parallelized step emulsifier devices typically do not work at maximum productivity. Here a design is introduced that parallelizes hundreds of step emulsifier nozzles, and effectively removes drops from the nozzle exits. The drop clearance is achieved by an open collecting channel, and is aided by buoyancy. Importantly, this clearance method avoids the use of a continuous phase flow for drop clearance and hence no shear is applied on the forming drops. The method works well for a wide range of drops, sizing from 30 to 1000 μm at production rates of 0.03 and 10 L per hour and achieved by 400 and 120 parallelized nozzles respectively.  more » « less
Award ID(s):
1708729
PAR ID:
10063989
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Lab on a Chip
Volume:
18
Issue:
1
ISSN:
1473-0197
Page Range / eLocation ID:
132 to 138
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Advanced Science)
    Abstract Emulsions are widely used in many industrial applications, and the development of efficient techniques for synthesizing them is a subject of ongoing research. Vapor condensation is a promising method for energy‐efficient, high‐throughput production of monodisperse nanoscale emulsions. However, previous studies using this technique are limited to producing small volumes of water‐in‐oil dispersions. In this work, a new method for the continuous synthesis of nanoscale emulsions (water‐in‐oil and oil‐in‐water) is presented by condensing vapor on free‐flowing surfactant solutions. The viability of oil vaporization and condensation is demonstrated under mild heating/cooling using diverse esters, terpenes, aromatic hydrocarbons, and alkanes. By systematically investigating water vapor and oil vapor condensation dynamics on bulk liquid‐surfactant solutions, a rich diversity of outcomes, including floating films, nanoscale drops, and hexagonally packed microdrops is uncovered. It is demonstrated that surfactant concentration impacts oil spreading, self‐emulsification, and such behavior can aid in the emulsification of condensed oil drops. This work represents a critical step toward advancing the vapor condensation method's applications for emulsions and colloidal systems, with broad implications for various fields and the development of new emulsion‐based products and industrial processes. 
    more » « less
  2. ; ; ; ; ; ; (, Advanced Materials Interfaces)
    Abstract Droplet microarray technology is of great interest in biology and chemistry as it allows for significant reactant savings and massive parallelization of experiments. Upon scaling down the footprint of each droplet in an array, it becomes increasingly challenging to produce the array drop‐by‐drop. Therefore, techniques for parallelized droplet production are developed, e.g., dip‐coating of biphilic substrates. However, it is in general difficult to tailor the characteristics of individual droplets, such as size and content, without updating the substrate. Here, the method of dip‐coating of uniformly patterned biphilic substrates in so‐called “acceleration‐mode” to produce droplet arrays featuring gradients in droplet height for fixed droplet footprint is developed. The results herein present this method applied to produce drops with base diameters varying over orders of magnitude, from as high as 6 mm to as small as 50 µm; importantly, the experimentally measured power‐law‐dependency of volume on capillary‐number matches analytical theory for droplet formation on heterogenous substrates though the precise quantitative values likely differ due to 2D substrate patterning. Gradient characteristics, including average droplet volume, steepness of the gradient, and its monotonicity, can all be tuned by changing the dip‐coating parameters, thus providing a robust method for high‐throughput screening applications and experiments. 
    more » « less
  3. ; ; ; ; (, Frontiers in Mechanical Engineering)
    Gas-dynamic virtual nozzles (GDVNs) play a vital role in delivering biomolecular samples during diffraction measurements at X-ray free-electron laser facilities. Recently, submicrometer resolution capabilities of two-photon polymerization 3D printing techniques opened the possibility to quickly fabricate gas-dynamic virtual nozzles with practically any geometry. In our previous work, we exploited this capability to print asymmetric gas-dynamic virtual nozzles that outperformed conventional symmetric designs, which naturally leads to the question of how to identify the optimal gas-dynamic virtual nozzle geometry. In this work, we develop a 3D computational fluid dynamics pipeline to investigate how the characteristics of microjets are affected by gas-dynamic virtual nozzle geometry, which will allow for further geometry optimizations and explorations. We used open-source software (OpenFOAM) and an efficient geometric volume-of-fluid method ( isoAdvector ) to affordably and accurately predict jet properties for different nozzle geometries. Computational resources were minimized by utilizing adaptive mesh refinement. The numerical simulation results showed acceptable agreement with the experimental data, with a relative error of about 10% for our test cases that compared bell- and cone-shaped sheath-gas cavities. In these test cases, we used a relatively low sheath gas flow rate (6 mg/min), but future work including the implementation of compressible flows will enable the investigation of higher flow rates and the study of asymmetric drip-to-jet transitions. 
    more » « less
  4. ; ; ; ; ; (, AIAA SciTech 2022 Forum)
    The attenuation of circumferential flow inherent in Rotating Detonation Rocket Engines (RDRE) through nozzle configurations is studied. The method used in this investigation consist of capturing highspeed side images of the exhaust to visualize the swirling flow. The images were processed through a dynamic mode decomposition code to resolve the main frequencies of the flow field at the exhaust. The obtained results were compared to the operational frequency of the engine computed with back-end images. Nozzle configurations were shown to have an influence on wave dynamics due to the induced back pressure. Results from the DMD method show similarity to those obtained from detonation surfaces. The nozzle configurations investigated are: 1) baseline without a nozzle, 2) aerospike nozzle only without the outer nozzle and 3) the inner and outer nozzles in conjunction. 
    more » « less
  5. ; ; ; (, Frontiers in Mechanical Engineering)
    Introduction:Agriculture is the largest user of water globally (i.e., 70% of freshwater use) and within the United States (i.e., 42% of freshwater use); irrigation ensures crops receive adequate water, thereby increasing crop yields. Surfactants have been used in various agricultural spray products to increase spray stability and alter droplet sizes. Methods:The effects of the addition of surfactant (0.1 wt% Surfactin; surface tension of 29.2 mN/m) to distilled water (72.79 mN/m) on spray dynamics and droplet formation were investigated in four flat fan (206.8–413.7 kPa), one full cone (137.9–413.7 kPa), and three LEPA bubbler (41.4–103.4 kPa) nozzles via imaging. Results and discussion:The flat fan and cone nozzles experienced second wind-induced breakup (i.e., unstable wavelengths drive breakup) of the liquid sheets exiting the nozzle; the addition of surfactant resulted in an increased breakup length and a decreased droplet size. The fan nozzles volumetric median droplet diameter decreased with the addition of surfactant (e.g., decreased by 26.3–65.6 μm in one nozzle). The full cone nozzle volumetric median droplet diameter decreased initially with the addition of surfactant (27.8, 14.3, and 13.4 μm at 137.9, 206.8, and 310.3 kPa respectively), but increased at 413.7 kPa (24.3 μm). Sprays from the bubbler nozzles were measured and observed to experience Rayleigh (i.e., the droplets form via capillary pinching at the end of the jet) and first wind-induced breakup (i.e., air impacts breakup along with capillary pinching). The effect of Surfactin on droplet size was minimal for the 41.4 kPa bubbler nozzle. The addition of surfactant increased the diameter of the jet or ligament formed from the bubbler plate, thereby increasing the breakup length and the droplet size at 68.9 and 103.4 kPa (droplet size increased by 750.6 and 4,462.7 μm, respectively). 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email