skip to main content


Title: Dynamic Modeling of Triboelectric Generators Using Lagrange’s Equation
Electret based energy scavenging devices utilize electro-static induction to convert mechanical energy into electrical energy. Uses for these devices include harvesting ambient energy in the environment and acting as sensors for a range of applications. These types of devices have been used in MEMS applications for over a decade. However, recently there is an interest in triboelectric generators/harvesters, i.e., electret based harvesters that utilize triboelectrification as well as electrostatic induction. The literature is filled with a variety of designs for the latter devices, constructed from materials ranging from paper and thin films; rendering the generators lightweight, flexible and inexpensive. However, most of the design of these devices is ad-hoc and not based on exploiting the underlying physics that govern their behavior; the few models that exist neglect the coupled electromechanical behavior of the devices. Motivated by the lack of a comprehensive dynamic model of these devices this manuscript presents a generalized framework based on a Lagrangian formulation to derive electromechanical equation for a lumped parameter dynamic model of an electret-based harvester. The framework is robust, capturing the effects of traditional MEMS devices as well as triboelectric generators. Exploiting numerical simulations the predictions are used to examine the behavior of electret based devices for a variety of loading conditions simulating real-world applications such as power scavengers under simple harmonic forcing and in pedestrian walking.  more » « less
Award ID(s):
1662925
NSF-PAR ID:
10066461
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Proceedings of the ASME Conference on Smart Materials, Adaptive Structures, and Intelligent Systems
Volume:
1
ISSN:
2153-2001
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    The flexibility of planar triboelectric nanogenerators (TENGs) enables them to be embedded into structures with complex geometries and to conform with any deformation of these structures. In return, the embedded TENGs function as either strain‐sensitive active sensors or energy harvesters while negligibly affecting the structure's original mechanical properties. This advantage inspires a new class of multifunctional materials where compliant TENGs are distributed into local operational units of mechanical metamaterial, dubbed TENG‐embedded mechanical metamaterials. This new class of metamaterial inherits the advantages of a traditional mechanical metamaterial, in that the deformation of the internal topology of material enables unusual mechanical properties. The concept is illustrated with experimental investigations and finite element simulations of prototypes based on two exemplar metamaterial geometries where functions of self‐powered sensing, energy harvesting, as well as the designated mechanical behavior are investigated. This work provides a new framework in producing multifunctional triboelectric devices.

     
    more » « less
  2. Abstract

    Vibration‐based energy‐harvesting technology, as an alternative power source, represents one of the most promising solutions to the problem of battery capacity limitations in wearable and implantable electronics, in particular implantable biomedical devices. Four primary energy transduction mechanisms are reviewed, namely piezoelectric, electromagnetic, electrostatic, and triboelectric mechanisms for vibration‐based energy harvesters. Through generic modeling and analyses, it is shown that various approaches can be used to tune the operation bandwidth to collect appreciable power. Recent progress in biomechanical energy harvesters is also shown by utilizing various types of motion from bodies and organs of humans and animals. To conclude, perspectives on next‐generation energy‐harvesting systems are given, whereby the ultimate intelligent, autonomous, and tunable energy harvesters will provide a new energy platform for electronics and wearable and implantable medical devices.

     
    more » « less
  3. Triboelectric energy harvesters or nanogenerators exploit both contact electri cation and electrostatic induction to scavenge excess energy from random motions of mechanical structures. This study focuses on the modeling of triboelectric energy harvesters in the con guration of contact-separation impact oscillators. While mechanical and electrostatic elements in such systems can be satisfactorily modeled based on existing theories, the underlying physics of contact electri cation is still under debate. The aim of this work is to introduce the surface charge density of dielectric layers as a variable into the macroscopic equations of motion of triboelectric impact oscillators by experimentally investigating the relation between the impact force and the charge transfer during contact electri cation. Specifi cally, specimens with selected pairs of materials are put under a solenoid-driven pressing tester which charges the specimens with a vertical force whose magnitude, frequency and duty cycle can be controlled. An electrometer is used to monitor the short circuit charge flow between the electrodes from which the charge accumulation on dielectric layers can be extracted. With results from parameter-sweep tests, the produced map from contact force to surface charge density can be integrated into equations of motion via curve fitting or interpolation. 
    more » « less
  4. Abstract

    Direct laser writing (DLW) is an advanced fabrication technique that allows users to create complex 3D microstructures from polymer precursors. These microstructures can be integrated with micro‐electromechanical systems (MEMS) actuators. MEMS actuators provide a convenient platform for interacting with the intricate microstructures, either to characterize their mechanical properties or cause them to deform. Structures are fabricated directly onto electrostatic comb drives and chevron thermal actuators that are produced using a commercial foundry process. By applying a voltage to the MEMS actuators, highly controlled deformation of these microstructures is observed. Mechanical behaviors of microstructures produced with different materials and fabrication conditions are compared. MEMS–DLW integration is a convenient approach to characterizing the mechanics of DLW microstructures and may well lead to a new class of dynamic 3D devices for applications ranging from tissue engineering to imaging.

     
    more » « less
  5. Abstract

    Triboelectric nanogenerator (TENG) devices are extensively studied as a mechanical energy harvester and self‐powered sensor for wearable electronics and physiological monitoring. However, the conventional TENG fabrication involving assembling steps and using the single property of matrix material suffers from simple devices shape and a single level of mechanical response for sensing and energy harvesting. Here, the printed multimaterial matrix for multilevel mechanical‐responsive TENG with on‐demand reconfiguration of shape is reported. A multimaterial 3D printing approach by using dynamic photomask‐assisted direct ink writing printing together with a two‐stage curing hybrid ink is first developed. Multimaterial structures with location‐specific properties, such as tensile modulus, failure stress, and glass transition temperature for controlled deformation, crack propagation path, and sequential shape memory, are directly printed. The printed multimaterial structure with sequential deformation behavior is used to fabricate a multilevel‐TENG (mTENG) device for multiple level mechanical energy harvesters and sensors. It is demonstrated that the mTENG can be embedded in shoe insoles to achieve both comfortable wearing and motion state monitoring. This work provides a new approach to combine multimaterial 3D printing with TENG devices for functional wearable electronics as energy harvester and sensors.

     
    more » « less