skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: FREQUENCY COMB GENERATION IN A NONLINEAR RESONATOR THROUGH MODE COUPLING USING A SINGLE TONE DRIVING SIGNAL
In this paper, we demonstrate bursting behavior in a nonlinear microelectromechanical (MEMS) resonator that creates a frequency comb in the corresponding spectral response. The bursting behavior occurs for a single driving tone applied to the resonator. The bursting behavior arises from the non-linear analog of “level anti-crossing” in a 1:3 internal resonance that can efficiently transfer energy between two modes of a resonator at low excitation amplitudes. The internal resonance creates a region in parameter space where stable oscillations do not exist, resulting in a forbidden zone of operation.  more » « less
Award ID(s):
1662619
PAR ID:
10073763
Author(s) / Creator(s):
Date Published:
Journal Name:
Technical digest - Solid-State Sensor, Actuator, and Microsystems Workshop
ISSN:
1539-204X
Page Range / eLocation ID:
79-82
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Proceedings of SPIE)
    A single micro-electromechanical (MEMS) resonator can be shown to exhibit behaviors unexpected in a simple resonant structure. For small driving forces, the resonator displays typical simple harmonic oscillator re- sponse. As the driving force is increased, the resonator shows the slightly more complex, but well understood, Duffing response. Rather unexpected response behavior can appear when the resonator frequency is detuned by nonlinear- ity to where two oscillatory modes of the resonator begin to interact through nonlinear coupling due to an internal resonance. The paper focuses on how the resonator response changes as the internal resonance is approached in the operating parameter space and how that behavior is conveniently represented in a bifurcation diagram. This behavior is accurately captured by a generic mathematical model. We describe an analysis of the model which shows how this coupled response varies with the system and drive parameters, especially focusing on the nonlinear coupling strength between the two modes. 
    more » « less
  2. ; ; ; (, ASME 2022 Conference on Smart Materials, Adaptive Structures and Intelligent Systems)
    In this article we propose a theoretical investigation of the nonlinear dynamical response of a class of planar resonators dubbed the V-Shaped resonator. The resonators are intended for energy harvesting purpose and are designed to exhibit two-to-one internal resonance. In particular, we navigate the design space for the generalized V-shaped resonator to investigate the influence of shape parameters on the performance of the Vibration Energy Harvester. Notably, we introduce two metrics that help elucidating the role of the shape parameter in dictating the behavior of the system in terms of peak voltage and operational bandwidth width. For simplicity, we consider that the system is subjected to harmonic excitations near its primary resonances. 
    more » « less
  3. ; (, Journal of Vibration and Acoustics)
    Abstract The acoustic energy attenuation capabilities of traditional Helmholtz resonators are enhanced by various methods, including by coupled resonators, absorbing materials, or replacement of rigid walls with flexible structures. Drawing from these concepts to envision a new platform of adaptive Helmholtz resonator, this research studies an adaptive acoustic resonator with an internal compliant structural member. The interaction between the structure and acoustic domain is controlled by compression constraint. By applying uniaxial compression to the resonator, the flexible member may be buckled, which drastically tailors the acoustic-structure interaction mechanisms in the overall system. A phenomenological analytical model is formulated and experimentally validated to scrutinize these characteristics. It is found that the compression constraint may enhance damping capabilities of the resonator by adapting the acoustic-structure interaction between the resonator and the enclosure. The area ratio of the flexible member to the resonator opening and the ratio of the fundamental natural frequency of the flexible member to that of the enclosure are discovered to have a significant influence on the system behavior. These results reveal new avenues for acoustic resonator concepts exploiting compliant internal structures to tailor acoustic energy attenuation properties. 
    more » « less
  4. ; ; ; ; (, Micromachines)
    In this work, we present a battery-less wireless Micro-Electro-Mechanical (MEMS)-based respiration sensor capable of measuring the respiration profile of a human subject from up to 2 m distance from the transceiver unit for a mean excitation power of 80 µW and a measured SNR of 124.8 dB at 0.5 m measurement distance. The sensor with a footprint of ~10 cm2 is designed to be inexpensive, maximize user mobility, and cater to applications where disposability is desirable to minimize the sanitation burden. The sensing system is composed of a custom UHF RFID antenna, a low-loss piezoelectric MEMS resonator with two modes within the frequency range of interest, and a base transceiver unit. The difference in temperature and moisture content of inhaled and exhaled air modulates the resonance frequency of the MEMS resonator which in turn is used to monitor respiration. To detect changes in the resonance frequency of the MEMS devices, the sensor is excited by a pulsed sinusoidal signal received through an external antenna directly coupled to the device. The signal reflected from the device through the antenna is then analyzed via Fast Fourier Transform (FFT) to extract and monitor the resonance frequency of the resonator. By tracking the resonance frequency over time, the respiration profile of a patient is tracked. A compensation method for the removal of motion-induced artifacts and drift is proposed and implemented using the difference in the resonance frequency of two resonance modes of the same resonator. 
    more » « less
  5. ; ; (, Microsystems & Nanoengineering)
    null (Ed.)
    Abstract Exploiting nonlinear characteristics in micro/nanosystems has been a subject of increasing interest in the last decade. Among others, vigorous intermodal coupling through internal resonance (IR) has drawn much attention because it can suggest new strategies to steer energy within a micro/nanomechanical resonator. However, a challenge in utilizing IR in practical applications is imposing the required frequency commensurability between vibrational modes of a nonlinear micro/nanoresonator. Here, we experimentally and analytically investigate the 1:2 and 2:1 IR in a clamped–clamped beam resonator to provide insights into the detailed mechanism of IR. It is demonstrated that the intermodal coupling between the second and third flexural modes in an asymmetric structure (e.g., nonprismatic beam) provides an optimal condition to easily implement a strong IR with high energy transfer to the internally resonated mode. In this case, the quadratic coupling between these flexural modes, originating from the stretching effect, is the dominant nonlinear mechanism over other types of geometric nonlinearity. The design strategies proposed in this paper can be integrated into a typical micro/nanoelectromechanical system (M/NEMS) via a simple modification of the geometric parameters of resonators, and thus, we expect this study to stimulate further research and boost paradigm-shifting applications exploring the various benefits of IR in micro/nanosystems. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email