An official website of the United States government
Dye sensitized solar cells are a type of thin film solar cell used to convert sunlight into electrical energy. These devices use a different mechanism than conventional solar cells and can be made from materials which are biocompatible and biodegradable. The simplicity of design and small environmental impact of these devices make them a likely candidate for replacing conventional PV devices. Since these solar cells are thin film cells, they can be made to be transparent and can be printed on flexible substrate, allowing their incorporation into many household objects such as windows, backpacks, walls, and other objects which would otherwise not be used for energy generation. A wide variety of fabrication techniques and device designs exist for DSSCs, each having its benefits and deficiencies; it is the purpose of this paper to evaluate some of these design variations, including different semiconductor and dye types and scaffolds, as well as semiconductor surface treatment using microwave plasma.
more »
« less
Dye-Sensitized Solar Cells
Dye sensitized solar cells are a type of thin film solar cell used to convert sunlight into electrical energy. These devices use a different mechanism than conventional solar cells and can be made from materials which are biocompatible and biodegradable. The simplicity of design and small environmental impact of these devices make them a likely candidate for replacing conventional PV devices. Since these solar cells are thin film cells, they can be made to be transparent and can be printed on flexible substrate, allowing their incorporation into many household objects such as windows, backpacks, walls, and other objects which would otherwise not be used for energy generation. A wide variety of fabrication techniques and device designs exist for DSSCs, each having its benefits and deficiencies; it is the purpose of this paper to evaluate some of these design variations, including different semiconductor and dye types and scaffolds, as well as semiconductor surface treatment.
more »
« less
- Award ID(s):
- 1719425
- PAR ID:
- 10081677
- Date Published:
- Journal Name:
- 16th LACCEI International Multi-Conference for Engineering, Education, and Technology: “Innovation in Education and Inclusion”/2414-6390
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract This paper explores nanoscale energy sensors and absorber metamaterials that can be used in various applications, such as solar cells and infrared detectors. It is possible to gain highly efficient and adjustable energy absorption, creating absorber metamaterials at the nanoscale that enhance the performance of solar cells. These metamaterials are based on molecular spintronics devices (MSD) and magnetic tunnel junctions (MTJ). The pillar shaped MTJs are made of two ferromagnetic metals separated by an insulating barrier, such as aluminum oxide (AlOx). The manufacturing process includes photoresist spin coating on a silicon wafer, photolithography, thin film sputtering, and liftoff. Following fabrication, the top and bottom electrodes are covalently bonded by a single molecule magnet (SMM) on the exposed side edges for strong magnetic coupling that changes the magnetic properties of both ferromagnetic metals. This study has considered different thin film deposition materials, configurations, and thicknesses. Magnetic field resonance and light reflectance measurements have been performed before and after molecule attachment to understand the molecule effect on the metamaterials’ energy absorption behavior. The Electron Spin Resonance (ESR) test revealed that the devices shifted following molecule attachment in both acoustic and optical modes. Moreover, due to molecule attachment, there have been significant alterations in the MTJ’s electromagnetic wave absorption characteristics with about 49% less reflectance. This metamaterial has various potential applications in aerospace, renewable energy, sensing, imaging, and communication. It is also a cheaper alternative to traditional solar cells and can inspire the development of smart metamaterials with selective absorption and tunable response.more » « less
-
A systematic study was performed with a coupled optoelectronic model to examine the effect of the concentration of sunlight on the efficiencies of CIGS, CZTSSe and AlGaAs thin-film solar cells with a graded-bandgap absorber layer. Efficiencies of 34.6% for CIGS thin-film solar cells and 29.9% for CZTSSe thin-film solar cells are predicted with a concentration of 100 suns, the respective one-sun efficiencies being 27.7% and 21.7%. An efficiency of 36.7% is predicted for AlGaAs thin-film solar cells with a concentration of 60 suns, in comparison to 34.5% one-sun efficiency. Sunlight concentration does not affect the per-sun electron–hole-pair (EHP) generation rate but reduces the per-sun EHP recombination rate either near the front and back faces or in the graded-bandgap regions of the absorber layer, depending upon the semiconductor used for that layer, and this is the primary reason for the improvement in efficiency. Other effects include the enhancement of open-circuit voltage, which can be positively correlated to the higher short-circuit current density. Sunlight concentration can therefore play a significant role in enhancing the efficiency of thin-film solar cells.more » « less
-
The properties of the leaky surface plasmon polariton (SPP) modes in gold nanostripes were investigated using scattered light microscopy. Both bare gold nanostripes and stripes coated with a thin polymer film containing a near-infrared absorbing dye were examined. Real-space microscopy images were employed to determine the SPP propagation length, while Fourier space images provided measurements of the wavevector. Frequency versus wavevector dispersion curves were generated by performing experiments at different excitation wavelengths, and the slopes of these curves yielded the SPP group velocities. For the bare nanostripes the group velocity was determined to be vg = (0.92 ± 0.05)c0 and for the dye-coated nanostripes it was vg = (0.85 ± 0.06)c0, where c0 is the speed of light. The SPP lifetimes were estimated by combining the group velocity and propagation length measurements. The results show that the lifetime of the gold SPPs is significantly reduced when the nanostripes are coated with the dye. At the peak of the dye absorption curve the change in the SPP dephasing rate induced by the dye–polymer film was found to be 0.07 fs–1. Finite element simulations show that the increased dephasing is due to a combination of energy transfer from the SPP modes to the dye, as well as increased radiation damping due to changes in the dielectric environment of the nanostructures. These findings provide insights into the energy transfer processes in plasmonic systems, which can be leveraged to optimize the design of plasmonic devices for applications in sensing, imaging and nanophotonic circuits.more » « less
-
Colloidal quantum dots are a promising candidate material for solar energy generation because of their band gap tunability and solution-based processing flexibility. However, conventional colloidal quantum dot solar cell fabrication techniques are still limited by their lack of scalability, environment conditions, and difficult installation scenarios. Here, we develop spray-casting manufacturing methods for fabricating thin film solar cells, discuss the trade-off between conductivity and transmittance in transparent contact materials, and demonstrate the feasibility of spray-casting colloidal quantum dot layers. This work on flexible manufacturing methods paves the way for installing solar energy devices in a variety of novel scenarios.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.18687/LACCEI2018.1.1.79
