skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Atomic Layer Deposition of Space-Efficient SnO2 Underlayers for BiVO4 Host-Guest Architectures for Photoassisted Water Splitting
Title: Atomic Layer Deposition of Space-Efficient SnO2 Underlayers for BiVO4 Host-Guest Architectures for Photoassisted Water Splitting
Bismuth vanadate (BiVO4) is promising for solar-assisted water splitting. The performance of BiVO4 is limited by charge separa- tion for > 70 nm films or by light harvesting for < 700 nm films. To resolve this mismatch, host–guest architectures use thin film coatings on 3D scaffolds. Recombination, however, is exacerbated at the extended host–guest interface. Underlayers are used to limit this recombination with a host-underlayer- guest series. Such underlayers consume precious pore volume where typical SnO2 underlayers are optimized with 65–80 nm. In this study, conformal and ultrathin SnO2 underlayers with low defect density are produced by atomic layer deposition (ALD). This shifts the optimized thickness to just 8 nm with sig- nificantly improved space efficiency. The materials chemistry thus determines the dimension optimization. Lastly, host– guest architectures are shown to have an applied bias photon- to-charge efficiency of 0.71%, a new record for a photoanode absorber prepared by ALD.  more » « less
Award ID(s):
1752615
PAR ID:
10085063
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
ChemSusChem
ISSN:
1864-5631
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Applied Physics Letters)
    SnO2 modified mesoporous ZrO2 is used to replace the mesoporous TiO2 layer and serves as a kind of mesoporous electron-transport layer during the low-temperature fabrication of mesoscopic perovskite solar cells that are based on carbon electrode. X-ray/ultraviolet photoelectron spectroscopy studies and electrical test observe that SnO2 modification brought down the work function while increasing the conductivity of the mesoporous ZrO2. Transient photovoltage/photocurrent decay curves, impedance spectroscopy, and photoluminescence mapping show that after the bottom layer of ZrO2 is modified by SnO2, the charge extraction process is accelerated while recombination is retarded. This modification helps to increase the power conversion efficiency from 4.70 (±0.85)% to 10.15 (±0.35)%, along with the optimized efficiency at 13.37% (AM1.5G, 100 mW/cm2) for the low-temperature devices. In addition, the effects of modification layers of SnO2 on the power conversion properties are carefully studied. This study shows that SnO2 modified mesoporous ZrO2 could serve as an efficient electron-transport layer for the low-temperature mesoscopic devices. 
    more » « less
  2. ; ; ; (, Catalysts)
    This study explores the application of Atomic Layer Deposition (ALD) to functionalize high-surface-area carbon supports with metal and metal oxide films and particles for applications in catalysis and electrocatalysis. The work reported here demonstrates that, through careful choice of precursors and absorption and reaction conditions, self-limited ALD growth on a high-surface-area carbon support can be achieved. Specific examples presented include the growth of conformal films of ZrO2 and SnO2 and the deposition of Ga2O3 and Pt particles on a carbon black support with a surface area of 250 m2·g−1. A novel strategy for controlling the Pt weight loading and producing sub-nanometer Pt particles on a carbon support using a single ALD cycle is also presented. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; (, Advanced Materials)
    Abstract Bending and folding techniques such as origami and kirigami enable the scale‐invariant design of 3D structures, metamaterials, and robots from 2D starting materials. These design principles are especially valuable for small systems because most micro‐ and nanofabrication involves lithographic patterning of planar materials. Ultrathin films of inorganic materials serve as an ideal substrate for the fabrication of flexible microsystems because they possess high intrinsic strength, are not susceptible to plasticity, and are easily integrated into microfabrication processes. Here, atomic layer deposition (ALD) is employed to synthesize films down to 2 nm thickness to create membranes, metamaterials, and machines with micrometer‐scale dimensions. Two materials are studied as model systems: ultrathin SiO2and Pt. In this thickness limit, ALD films of these materials behave elastically and can be fabricated with fJ‐scale bending stiffnesses. Further, ALD membranes are utilized to design micrometer‐scale mechanical metamaterials and magnetically actuated 3D devices. These results establish thin ALD films as a scalable basis for micrometer‐scale actuators and robotics. 
    more » « less
  4. ; ; ; ; ; ; ; ; (, Journal of Vacuum Science & Technology A)
    Atomic layer deposition (ALD) of ruthenium (Ru) is being investigated for next generation interconnects and conducting liners for copper metallization. However, integration of ALD Ru with diffusion barrier refractory metal nitrides, such as tantalum nitride (TaN), continues to be a challenge due to its slow nucleation rates. Here, we demonstrate that an ultraviolet-ozone (UV-O3) pretreatment of TaN leads to an oxidized surface that favorably alters the deposition characteristics of ALD Ru from islandlike to layer-by-layer growth. The film morphology and properties are evaluated via spectroscopic ellipsometry, atomic force microscopy, electrical sheet resistance measurements, and thermoreflectance. We report a 1.83 nm continuous Ru film with a roughness of 0.19 nm and a sheet resistance of 10.8 KΩ/□. The interface chemistry between TaN and Ru is studied by x-ray photoelectron spectroscopy. It is shown that UV-O3 pretreatment, while oxidizing TaN, enhances Ru film nucleation and limits further oxidation of the underlying TaN during ALD. An oxygen “gettering” mechanism by TaN is proposed to explain reduced oxygen content in the Ru film and higher electrical conductivity compared to Ru deposited on native-TaN. This work provides a simple and effective approach using UV-O3 pretreatment for obtaining sub-2 nm, smooth, and conducting Ru films on TaN surfaces. 
    more » « less
  5. ; ; ; ; (, ChemPlusChem)
    Abstract We report a feasible method to control self‐recognition during the self‐assembly of a hydrophilic macroion, phosphate‐functionalized γ‐cyclodextrin (γ‐CD‐P), though host‐guest interactions. We confirmed that γ‐CD‐P can form a host‐guest complex with a super‐chaotropic anion, namely the B12F122−borate cluster, by using NMR spectroscopy and isothermal titration calorimetry. The loaded γ‐CD‐P, which has a higher charge density, can be distinguished from the uncomplexed γ‐CD‐P, leading to self‐sorting behavior during the self‐assembly process, confirmed by the formation of two types of individual supramolecular structures (Rhof ca. 57 nm and 18 nm, determined by light scattering) instead of hybrid structures in mixed dilute solution. This self‐recognition behavior is accounted for by the difference in intermolecular electrostatic interactions arising from the loading. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email