skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • SnO2 modified mesoporous ZrO2 as efficient electron-transport layer for carbon-electrode based, low-temperature mesoscopic perovskite solar cells
Title: SnO2 modified mesoporous ZrO2 as efficient electron-transport layer for carbon-electrode based, low-temperature mesoscopic perovskite solar cells
SnO2 modified mesoporous ZrO2 is used to replace the mesoporous TiO2 layer and serves as a kind of mesoporous electron-transport layer during the low-temperature fabrication of mesoscopic perovskite solar cells that are based on carbon electrode. X-ray/ultraviolet photoelectron spectroscopy studies and electrical test observe that SnO2 modification brought down the work function while increasing the conductivity of the mesoporous ZrO2. Transient photovoltage/photocurrent decay curves, impedance spectroscopy, and photoluminescence mapping show that after the bottom layer of ZrO2 is modified by SnO2, the charge extraction process is accelerated while recombination is retarded. This modification helps to increase the power conversion efficiency from 4.70 (±0.85)% to 10.15 (±0.35)%, along with the optimized efficiency at 13.37% (AM1.5G, 100 mW/cm2) for the low-temperature devices. In addition, the effects of modification layers of SnO2 on the power conversion properties are carefully studied. This study shows that SnO2 modified mesoporous ZrO2 could serve as an efficient electron-transport layer for the low-temperature mesoscopic devices.  more » « less
Award ID(s):
1903962
PAR ID:
10466108
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ; ;
Date Published:
Journal Name:
Applied Physics Letters
Volume:
120
Issue:
26
ISSN:
0003-6951
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; (, Solar RRL)
    Improving efficiency and stability has become an urgent issue in the application of perovskite solar cells (PSCs). Herein, a kind of long‐chain polymer or polymethylmethacrylate (PMMA) is added into the spiro‐OMeTAD matrix to improve the film formation process and hence the device performance. It is observed that, after modification, the spiro‐OMeTAD‐based hole‐transporting layer becomes uniform, continuous, and condensed. Meanwhile, the power conversion efficiency of the devices is upgraded. Compared with the control device, open‐circuit voltage of the modified one (with moderate doping) increases from 1.06 (±0.03) to 1.10 (±0.02) V, fill factor increases from 72.20 (±3.44)% to 75.59 (±3.35)%, and the power conversion efficiency increases from 18.82 (±1.06)% to 20.51 (±0.82)% (highest at 21.78%) under standard test condition (AM 1.5G, 100 mW cm−2). Transient photocurrent/photovoltage decay curves, time‐resolved photoluminance, and impedance spectroscopy studies show that the modification could accelerate charge transfer and retard interfacial recombination. In addition, the modification improves device stability. Due to the strengthened barrier against penetration of “H2O/O2/Ag,” the efficiency of the unsealed device could retain 91.49% (by average) of the initial one after 100 days storage in the dark [relative humidity = 30(±5)%]. This work shows that long‐chain polymer doping could simultaneously improve efficiency and stability of spiro‐OMeTAD‐based PSCs. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Energy Materials)
    Abstract Poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is a popular hole transport material in perovskite solar cells (PSCs). However, the devices with PEDOT:PSS exhibit large open‐circuit voltage (Voc) loss and low efficiency, which is attributed to mismatched energy level alignment and the poor interface of PEDOT:PSS and perovskite. Here, three polymer analogues to polyaniline (PANI), PANI–carbazole (P1), PANI–phenoxazine (P2), and PANI–phenothiazine (P3) are designed with different energy levels to modify the interface between PEDOT:PSS and the perovskite layer and improve the device performance. The effects of the polymers on the device performance are demonstrated by evaluating the work function adjustment, perovskite growth control, and interface modification in MAPbI3‐based PSCs. Low bandgap Sn–Pb‐based PSCs are also fabricated to confirm the effects of the polymers. Three effects are evaluated through the comparison study of PEDOT:PSS‐based organic solar cells and MAPbI3 PSCs based on the PEDOT:PSS modified by P1, P2, and P3. The order of contribution for the three effects is work function adjustment > surface modification > perovskite growth control. MAPbI3 PSCs modified with P2 exhibit a highVocof 1.13 V and a high‐power conversion efficiency of 21.06%. This work provides the fundamental understanding of the interface passivation effects for PEDOT:PSS‐based optoelectronic devices. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; (, Applied Physics Letters)
    Capsaicin is used to modify SnO 2 quantum dots and then used as an electron-transfer material for perovskite solar cells. After capsaicin modification, the power conversion efficiency of the devices increases from 19.90 (± 0.47)% to 21.87 (± 0.28)% with a champion device of 22.24% (AM 1.5G, 100 mW/cm 2 ). Transient photovoltage and photocurrent decay show that, after the capsaicin doping, the lifetime increases from 21.55 (± 1.54) to 27.63 (± 1.45)  μs, while the charge extraction time reduces from 1.90 (± 0.09) to 1.67 (± 0.06)  μs. Time-resolved photoluminescence and impedance spectrum studies show similar results. The accelerated charge transfer and retarded recombination are due to defect passivation. Space charge limited current study shows that, after modification, the trap density of devices is reduced from 2.24 × 10 15 to 1.28 × 10 15  cm −3 . X-ray photoelectron spectroscopy and theoretical calculation indicate that the reduced trap density is due to the chemical interaction between carbonyl group (from capsaicin) and Sn atom, and that between carbonyl group and Pb atom. 
    more » « less
  4. ; ; ; ; (, Electronic Materials)
    Dye-sensitized solar cells (DSSCs) hold unique promise in solar photovoltaics owing to their low-cost fabrication and high efficiency in ambient conditions. However, to improve their commercial viability, effective, and low-cost methods must be employed to enhance their light harvesting capabilities, and hence photovoltaic (PV) performance. Improving the absorption of incoming light is a critical strategy for maximizing solar cell efficiency while overcoming material limitations. Mesoporous silica nanoparticles (MSNs) were employed herein as a reflective layer on the back of transparent counter electrodes. Chemically synthesized MSNs were applied to DSSCs via bar coating as a facile fabrication step compatible with roll-to-roll manufacturing. The MSNs diffusely scatter the unused incident light transmitted through the DSSCs back into the photoactive layers, increasing the absorption of light by N719 dye molecules. This resulted in a 20% increase in power conversion efficiency (PCE), from 5.57% in a standard cell to 6.68% with the addition of MSNs. The improved performance is attributed to an increase in photon absorption which led to the generation of a higher number of charge carriers, thus increasing the current density in DSSCs. These results were corroborated with electrochemical impedance spectroscopy (EIS), which showed improved charge transport kinetics. The use of MSNs as reflectors proved to be an effective practical method for enhancing the performance of thin film solar cells. Due to silica’s abundance and biocompatibility, MSNs are an attractive material for meeting the low-cost and non-toxic requirements for commercially viable integrated PVs. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; (, Applied Physics Letters)
    Hydrophobic and long-chain molecule oleylamine is used to modify the spiro-OMeTAD matrix, which is then adopted for the hole-transport layer in perovskite solar cells. It is observed that after moderate doping, the power conversion efficiency of the devices increases from 17.82 (±1.47)% to 20.68 (±0.77)%, with the optimized efficiency of 21.57% (AM 1.5G, 100 mW/cm2). The improved efficiency is ascribed to the favored charge extraction and retarded charge recombination, as reflected by transient photovoltage/photocurrent curves and impedance spectroscopy measurement. In addition, the grazing incidence photoluminescence spectrum reveals that oleylamine doping causes a blue shift of the luminescence peak of the surface layer of the halide perovskite film, while the Mott−Schottky study observes 100 mV increment in the built-in potential, both of which indicate possible defect passivation behavior on the perovskite. Moreover, an accelerated damp test observes that moisture resistance of the device is also upgraded, which is due to the improved hydrophobicity of the spiro-OMeTAD matrix. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email