skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Bridge Damage Detection using the Inverse Dynamics Optimization Algorithm
The current methods to identify the bridge damage depend on time-consuming visual inspection and/or based on the data collected from sensor-based monitoring, which make the assessment process very expensive. In this paper, the bridge damage is identified using the data collected from an ordinary strain transducer. In order to demonstrate the new method, 3-D finite element models followed by the Inverse Dynamics Optimization Algorithm are performed. The inverse algorithm utilized to calculate the weight of the force that passes on the bridge. Any change in the bridge stiffness by damage will influence the force history which calculated by the inverse algorithm. The proposed method divided into two stages: in the first one, two finite element models are used to simulate the bridge displacement due to quarter car model one representing the healthy bridge and the other for the damage one. In the second stage, the inverse dynamics optimization algorithm used to identify the damage locations.  more » « less
Award ID(s):
1645863
PAR ID:
10089841
Author(s) / Creator(s):
;
Date Published:
Journal Name:
26th ASNT Research Symposium
Page Range / eLocation ID:
175-184
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, 27th ASNT Research Symposium)
    Bridge Weigh-in-Motion (B-WIM) is the concept of using measured strains on a bridge to calculate the static weights of passing traffic loads as they pass overhead at full highway speed. Weight calculations should have a high level of accuracy to enable the B-WIM system from being a tool for direct overload enforcement. This paper describes the experimental testing of the B-WIM system based on moving force identification (MFI) theory. The bridge was instrumented by wireless accelerometers and strain gages attached to the girders to measure the dynamics response when the calibrated trucks pass the bridge. LS-Dyna finite element program is used to imitate the 3-D bridge model, which validated utilizing the collected acceleration data. Then measurements from the wireless strain sensors are utilized to run the (MFI) algorithm and calculate the truck weight. 
    more » « less
  2. ; (, 27th ASNT Research Symposium)
    Bridge Weigh-in-Motion (B-WIM) is the concept of using measured strains on a bridge to calculate the static weights of passing traffic loads as they pass overhead at full highway speed. Weight calculations should have a high level of accuracy to enable the B-WIM system from being a tool for direct overload enforcement. This paper describes the experimental testing of the B-WIM system based on moving force identification (MFI) theory. The bridge was instrumented by wireless accelerometers and strain gages attached to the girders to measure the dynamics response when the calibrated trucks pass the bridge. LS-Dyna finite element program is used to imitate the 3-D bridge model, which validated utilizing the collected acceleration data. Then measurements from the wireless strain sensors are utilized to run the (MFI) algorithm and calculate the truck weight. 
    more » « less
  3. ; ; ; (, Transportation research record)
    This paper evaluates the ability of two different data-driven models to detect and localize simulated structural damage in an in-service bridge for long-term structural health monitoring (SHM). Strain gauge data collected over 4 years is used to characterize the undamaged state of the bridge. The Powder Mill Bridge in Barre, Massachusetts, U.S., which has been instrumented with strain gauges since its opening in 2009, is used as a case study, and the strain gauges used in this study are located at 26 different stations throughout the bridge superstructure. A linear regression (LR) model and an artificial neural network (ANN) model are evaluated based on the following criteria: (a) the ability to accurately predict the strain at each location in the undamaged state of the bridge; (b) the ability to detect simulated structural damage to the bridge superstructure; and (c) the ability to localize simulated structural damage. Both the LR and the ANN models were able to predict the strain at the 26 stations with an average error of less than 5%, indicating that both methodologies were effective in characterizing the undamaged state of the bridge. A calibrated finite element model was then used to simulate damage to the Powder Mill Bridge for three damage scenarios: fascia girder corrosion, girder fracture, and deck delamination. The LR model proved to be just as effective as the ANN model at detecting and localizing damage. A recommended protocol is thus presented for integrating data-driven models into bridge asset management systems. 
    more » « less
  4. ; ; (, Reliable computing)
    We present an interval-based approach for parameter identification in structural static problems. Our inverse formulation models uncertainties in measurement data as interval and exploits the Interval Finite Element Method (IFEM) combined with adjoint-based optimization. The inversion consists of a two-step algorithm: first, an estimate of the parameters is obtained by a deterministic iterative solver. Then, the algorithm switches to the interval extension of the previous solver, using the deterministic estimate of the parameters as an initial guess. The formulation is illustrated in solutions of various numerical examples showing how the guaranteed interval enclosures always contain Monte Carlo predictions. 
    more » « less
  5. ; ; ; (, Frontiers in Built Environment)
    Piezoelectric impedance sensing is promising for highly accurate damage identification because of its high-frequency active interrogative nature and simplicity in data acquisition. To fully unleash the potential, effective inverse analysis is needed in order to pinpoint the damage location and identify the severity. The inverse analysis, however, may be underdetermined since there exists a very large number of unknowns (i.e., locations and severity levels) to be solved in a finite element model but only limited measurements are available in actual practice. To uncover the true damage scenario, an inverse analysis strategy built upon the multi-objective optimization, which aims at matching the multiple sets of measurements with model predictions in the damage parametric space, can be formulated to identify a small set of solutions. This solution set then allows the incorporation of empirical knowledge to facilitate final decision-making. The main disadvantage of the conventional inverse analysis strategy is that it overlooks uncertainties that exist in both baseline structural modeling and actual measurements. To address this, in this research, we formulate a probabilistic multi-objective optimization-based inverse analysis framework, which is fundamentally built upon the differential evolution Markov chain Monte Carlo (DEMC) technique. The new approach can yield the Pareto optimal set (solutions) and the respective Pareto front, which are represented in a probabilistic sense to account for uncertainties. Comprehensive case studies with experimental investigations are conducted to demonstrate the effectiveness of this new approach. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email