skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Coalescence-induced jumping of droplets on superomniphobic surfaces with macrotexture
When two liquid droplets coalesce on a superrepellent surface, the excess surface energy is partly converted to upward kinetic energy, and the coalesced droplet jumps away from the surface. However, the efficiency of this energy conversion is very low. In this work, we used a simple and passive technique consisting of superomniphobic surfaces with a macrotexture (comparable to the droplet size) to experimentally demonstrate coalescence-induced jumping with an energy conversion efficiency of 18.8% (i.e., about 570% increase compared to superomniphobic surfaces without a macrotexture). The higher energy conversion efficiency arises primarily from the effective redirection of in-plane velocity vectors to out-of-plane velocity vectors by the macrotexture. Using this higher energy conversion efficiency, we demonstrated coalescence-induced jumping of droplets with low surface tension (26.6 mN m −1 ) and very high viscosity (220 mPa·s). These results constitute the first-ever demonstration of coalescence-induced jumping of droplets at Ohnesorge number >1.  more » « less
Award ID(s):
1751628
PAR ID:
10090363
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Science Advances
Volume:
4
Issue:
11
ISSN:
2375-2548
Page Range / eLocation ID:
eaau3488
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Advanced Materials Interfaces)
    Abstract Coalescence‐induced droplet jumping phenomena on superhydrophobic surfaces can significantly enhance their heat transfer performances by effectively removing droplets from the surfaces. However, understanding the ideal design for condensing surfaces is still challenging due to the complex nature of droplet dynamics associated with their nucleation, coalescing, and jumping mechanisms. The intrinsic dynamic nature of droplet behaviors suggests the use of hierarchical concave morphology to account for the different length scales associated with each transport phenomenon. The hierarchical morphology thereby enables heterogeneous wetting characteristics by realizing both microscale droplets on superhydrophobic surfaces and nanoscale pinning regions beneath the droplets by arresting liquid residues after droplet jumping. Heat transfer performances are further examined by extracting physically meaningful descriptors, such as nucleation sites, droplet growth rates, and droplet jumping frequency, showing 44% enhancements when droplet nucleation sites are designed in selective locations. 
    more » « less
  2. ; ; ; ; ; ; ; ; (, Nature Physics)
    Verberck, Bart (Ed.)
    The Leidenfrost effect—the levitation and hovering of liquid droplets on hot solid surfaces—generally requires a sufficiently high substrate temperature to activate liquid vaporization. Here we report the modulation of Leidenfrost-like jumping of sessile water microdroplets on micropillared surfaces at a relatively low temperature. Compared to traditional Leidenfrost effect occurring above 230 °C, the fin-array-like micropillars enable water microdroplets to levitate and jump off the surface within milliseconds at a temperature of 130 °C by triggering the inertia-controlled growth of individual vapour bubbles at the droplet base. We demonstrate that droplet jumping, resulting from momentum interactions between the expanding vapour bubble and the droplet, can be modulated by tailoring of the thermal boundary layer thickness through pillar height. This enables regulation of the bubble expansion between the inertia-controlled mode and the heat-transfer-limited mode. The two bubble-growth modes give rise to distinct droplet jumping behaviours characterized by constant velocity and constant energy regimes, respectively. This heating strategy allows the straightforward purging of wetting liquid droplets on rough or structured surfaces in a controlled manner, with potential applications including the rapid removal of fouling media, even when located in surface cavities. 
    more » « less
  3. ; ; ; ; ; ; (, Advanced Materials Interfaces)
    Abstract Paper‐based superomniphobic surfaces are of great interest because paper is flexible, inexpensive, lightweight, breathable, and recyclable. Prior reports on paper‐based superomniphobic surfaces have failed to demonstrate high mobility with low surface tension liquids. In order to overcome this issue, in this work, superomniphobic papers are developed through growth of nanofilaments on inherent microfibers of papers without noticeably altering their microscale features (i.e., diameter and distance of the microfibers). These superomniphobic papers display very low roll‐off angle, indicative of ultra‐high droplet mobility, even with low surface tension liquids. Here, a facile method is also developed to control the motion and adhesion of the droplets on the superomniphobic paper. Utilizing such liquid mobility in a controlled manner on these superomniphobic papers, a simple on‐paper pH sensor is fabricated. It is anticipated that this on‐paper, simple, and rapid detection methodology can also be extended to the colorimetric sensing of protein and chemical assays. Further, these superomniphobic papers have potential applications in water–oil separation and enhanced weight‐bearing capacity. 
    more » « less
  4. ; ; ; ; (, Heat Transfer Engineering)
    Atmospheric condensation is very important for multiple practical applications such as heat transfer, thermal management, aerospace, and condensate harvesting. Water droplets heterogeneously nucleate on the surfaces when the temperature is below the dew point temperature. The nucleation energy barrier for a condensed droplet varies significantly with the humidity content in the operating environment. The freezing of this condensate is also dependent on the operating conditions and surface properties. This article presents an experimental study of condensation and freezing from humid air with the objective of understanding how the surface morphology and chemistry determines the droplet shape and wetting state. Hexagonal close-packed arrays of titanium (Ti) pillars are patterned using microsphere photolithography (MPL). The Ti nanostructured surface was tested with and without a Teflon© coating to reveal the condensate harvesting, passive freezing, and dropwise condensation applications, respectively. Condensation and freezing tests were conducted in the presence of non-condensable gases (air) with different relative humidity (RH) levels to control the nucleation site density. The experiments showed that droplet growth occurs in the following stages: initial nucleation, direct growth, and coalescence events. By pinning droplets, coalescence is suppressed for the Ti nanopillared surface altering the size distribution of droplets and significantly accelerating the freezing process. 
    more » « less
  5. ; ; ; ; (, Advanced Functional Materials)
    Abstract Massive studies concern the development of low‐carbon water and energy systems. Specifically, surfaces with special wettability to promote vapor‐to‐liquid condensation have been widely studied, but current solutions suffer from poor heat transfer performances due to inefficient droplet removal. In this study, the limit of condensation on a beetle‐inspired biphilic quasi‐liquid surface (QLS) in a steam environment is pushed, which provides a heat flux 100 times higher than that in atmospheric condensation. Unlike the beetle‐inspired surfaces that have sticky hydrophilic domains, the biphilic QLS consists of PEGylated and siloxane polymers as hydrophilic and hydrophobic quasi‐liquid patterns with the contact angle hysteresis of 3° and 1°, respectively. More importantly, each hydrophilic slippery pattern behaves like a slippery bridge that accelerates droplet coalescence and removal. As a result, the condensed droplets grow rapidly and shed off. It is demonstrated that the biphilic‐striped QLS shows a 60% higher water harvesting rate in atmospheric condensation and a 170% higher heat transfer coefficient in steam condensation than the conventional beetle‐inspired surface. This study provides a new paradigm to push the limit of condensation heat transfer at a high heat flux, which sheds light on the next‐generation surface design for water and energy sustainability. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email