skip to main content


Title: Optimizing Electron Transfer from CdSe QDs to Hydrogenase for Photocatalytic H 2 Production
A series of viologen related redox mediators of varying reduction potential has been characterized and their utility as electron shuttles between CdSe quantum dots and hydrogenase enzyme has been demonstrated. Tuning the mediator LUMO energy optimizes peformance of this hybrid photocatalytic system by balancing electron transfer rates of the shuttle  more » « less
Award ID(s):
1808288 1807865
NSF-PAR ID:
10091531
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Chemical Communications
ISSN:
1359-7345
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. [RuCp*(1,3,5-R 3 C 6 H 3 )] 2 {Cp* = η 5 -pentamethylcyclopentadienyl, R = Me, Et} have previously been found to be moderately air stable, yet highly reducing, with estimated D + /0.5D 2 (where D 2 and D + represent the dimer and the corresponding monomeric cation, respectively) redox potentials of ca. −2.0 V vs. FeCp 2 +/0 . These properties have led to their use as n-dopants for organic semiconductors. Use of arenes substituted with π-electron donors is anticipated to lead to even more strongly reducing dimers. [RuCp*(1-(Me 2 N)-3,5-Me 2 C 6 H 3 )] + PF 6 − and [RuCp*(1,4-(Me 2 N) 2 C 6 H 4 )] + PF 6 − have been synthesized and electrochemically and crystallographically characterized; both exhibit D + /D potentials slightly more cathodic than [RuCp*(1,3,5-R 3 C 6 H 3 )] + . Reduction of [RuCp*(1,4-(Me 2 N) 2 C 6 H 4 )] + PF 6 − using silica-supported sodium–potassium alloy leads to a mixture of isomers of [RuCp*(1,4-(Me 2 N) 2 C 6 H 4 )] 2 , two of which have been crystallographically characterized. One of these isomers has a similar molecular structure to [RuCp*(1,3,5-Et 3 C 6 H 3 )] 2 ; the central C–C bond is exo , exo , i.e. , on the opposite face of both six-membered rings from the metals. A D + /0.5D 2 potential of −2.4 V is estimated for this exo , exo dimer, more reducing than that of [RuCp*(1,3,5-R 3 C 6 H 3 )] 2 (−2.0 V). This isomer reacts much more rapidly with both air and electron acceptors than [RuCp*(1,3,5-R 3 C 6 H 3 )] 2 due to a much more cathodic D 2 ˙ + /D 2 potential. The other isomer to be crystallographically characterized, along with a third isomer, are both dimerized in an exo , endo fashion, representing the first examples of such dimers. Density functional theory calculations and reactivity studies indicate that the central bonds of these two isomers are weaker than those of the exo , exo isomer, or of [RuCp*(1,3,5-R 3 C 6 H 3 )] 2 , leading to estimated D + /0.5D 2 potentials of −2.5 and −2.6 V vs. FeCp 2 +/0 . At the same time the D 2 ˙ + /D 2 potentials for the exo , endo dimers are anodically shifted relative to those of [RuCp*(1,3,5-R 3 C 6 H 3 )] 2 , resulting in much greater air stability than for the exo , exo isomer. 
    more » « less
  2. null (Ed.)
    A new two-phase BaTiO 3  : La 0.7 Sr 0.3 MnO 3 nanocomposite system with a molar ratio of 8 : 2 has been grown on single crystal SrTiO 3 (001) substrates using a one-step pulsed laser deposition technique. Vertically aligned nanocomposite thin films with ultra-thin La 0.7 Sr 0.3 MnO 3 pillars embedded in the BaTiO 3 matrix have been obtained and the geometry of the pillars varies with deposition frequency. The room temperature multiferroic properties, including ferromagnetism and ferroelectricity, have been demonstrated. Anisotropic ferromagnetism and dielectric constants have been observed, which can be tuned by deposition frequencies. The tunable anisotropic optical properties originated from the conducting pillars in the dielectric matrix structure, which cause different electron transport paths. In addition, tunable band gaps have been discovered in the nanocomposites. This multiferroic and anisotropic system has shown its great potentials towards multiferroics and non-linear optics. 
    more » « less
  3. Metal oxide semiconductors have attracted much attention due to their versatility in different applications, ranging from biosensing to green energy-harvesting technologies. Among these metal oxides, oxide-based diluted magnetic semiconductors have also been proposed for fuel cell applications, especially for the oxygen reduction reaction (ORR) and the oxygen evolution reaction. However, the catalytic mechanism has been proposed to follow a two-electron pathway, forming hydrogen peroxide, instead of the four-electron pathway. Herein, we report cobalt-doped zinc oxide (CoxZn1–xO, 0 < x < 0.018) materials prepared using a co-precipitation method suitable for the electrocatalytic production of hydrogen peroxide. The electrocatalytic performance of CoxZn1–xO materials showed up to 60% hydrogen peroxide production with onset potentials near 649 mV, followed by the two-electron ORR mechanism. Ex situ X-ray absorption spectroscopy experiments at the Co K-edge demonstrated the presence of Co(II) ions at tetrahedral sites within the ZnO lattice. 
    more » « less
  4. Nanocrystalline MnFe2O4 has shown promise as a catalyst for the oxygen reduction reaction (ORR) in alkaline solutions, but the material has been sparingly studied as highly ordered thin-film catalysts. To examine the role of surface termination and Mn and Fe site occupancy, epitaxial MnFe2O4 and Fe3O4 spinel oxide films were grown on (001)- and (111)-oriented Nb:SrTiO3 perovskite substrates using molecular beam epitaxy and studied as electrocatalysts for the oxygen reduction reaction (ORR). High-resolution X-ray diffraction (HRXRD) and X-ray photoelectron spectroscopy (XPS) show the synthesis of pure phase materials, while scanning transmission electron microscopy (STEM) and reflection high-energy electron diffraction (RHEED) analysis demonstrate island-like growth of (111) surface-terminated pyramids on both (001)- and (111)-oriented substrates, consistent with the literature and attributed to the lattice mismatch between the spinel films and the perovskite substrate. Cyclic voltammograms under a N2 atmosphere revealed distinct redox features for Mn and Fe surface termination based on comparison of MnFe2O4 and Fe3O4. Under an O2 atmosphere, electrocatalytic reduction of oxygen was observed at both Mn and Fe redox features; however, a diffusion-limited current was only achieved at potentials consistent with Fe reduction. This result contrasts with that of nanocrystalline MnFe2O4 reported in the literature where the diffusion-limited current is achieved with Mn-based catalysis. This difference is attributed to a low density of Mn surface termination, as determined by the integration of current from CVs collected under N2, in addition to low conductivity through the MnFe2O4 film due to the degree of inversion. Such low densities are attributed to the synthetic method and island-like growth pattern and highlight challenges in studying ORR catalysis with single-crystal spinel materials. 
    more » « less
  5. Abstract

    Calcium germanides with two mid‐late rare‐earth metals, Ca5−xGdxGe3and Ca5−xTbxGe3(x≈0.1−0.2), have been synthesized and structurally characterized. Additionally, a lanthanum‐rich germanide with calcium substitutions, La5−xCaxGe3(x≈0.5) has also been identified. The three structures have been established from single‐crystal X‐ray diffraction methods and confirmed to crystallize with the Cr5B3‐type in the tetragonal space groupI4/mcm(no. 140;Z=4; Pearson symboltI32), where part of the germanium atoms are interconnected into Ge2‐dimers, formally [Ge2]6−. Rare‐earth metal and calcium atoms are arranged in distorted trigonal prisms, square‐antiprisms and cubes, centered by Ge or rare‐earth/calcium metal atoms. These studies show that the amount of trivalent rare‐earth metal atoms substituting divalent calcium atoms is in direct correlation with the lengths of the Ge−Ge bond within the Ge2‐dimers, with distance varying between 2.58 Å in Ca5−xGdxGe3and 2.75 Å in La5−xCaxGe3. Such an elongation of the Ge−Ge bond is consistent with the notion that the parent Ca5Ge3Zintl phase (e. g. (Ca2+)5[Ge2]6−[Ge4−]) is being driven out of the ideal valence electron count and further reduced. In this context, this work demonstrates the ability of the germanides with the Cr5B3structure type to accommodate substitutions and wider valence electron count while maintaining their global structural integrity.

     
    more » « less