skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Building bridges between halide perovskite nanocrystals and thin-film solar cells
The development of halide perovskite (HP) based thin film solar cells has been unprecedented in the past few years, and there is significant ongoing effort aiming to make perovskite solar cells (PSCs) more efficient and stable. Parallel to the PSC research, there is growing interest in exploring the synthesis and physiochemical behaviors of HP nanocrystals (NCs). While these HP NCs inherently possess many unique properties that are suitable for the use in PSCs, the reported effort of incorporating HP NCs into PSCs is still highly limited. As a result, there is a gap between HP NC and PSC research. In this context, we provide here a brief review of the established HP NC synthesis and a discussion of the several recent studies pertaining to the use of HP NCs in PSCs. Based on these, we provide perspectives on promising directions for bridging the gap between HP NC and PSC research in the future.  more » « less
Award ID(s):
1538893
PAR ID:
10092598
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Sustainable Energy & Fuels
Volume:
2
Issue:
11
ISSN:
2398-4902
Page Range / eLocation ID:
2381 to 2397
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, Angewandte Chemie International Edition)
    Abstract In recent years, there have been rapid advances in the synthesis of lead halide perovskite nanocrystals (NCs) for use in solar cells, light emitting diodes, lasers, and photodetectors. These compounds have a set of intriguing optical, excitonic, and charge transport properties, including outstanding photoluminescence quantum yield (PLQY) and tunable optical band gap. However, the necessary inclusion of lead, a toxic element, raises a critical concern for future commercial development. To address the toxicity issue, intense recent research effort has been devoted to developing lead‐free halide perovskite (LFHP) NCs. In this Review, we present a comprehensive overview of currently explored LFHP NCs with an emphasis on their crystal structures, synthesis, optical properties, and environmental stabilities (e.g., UV, heat, and moisture resistance). In addition, strategies for enhancing optical properties and stabilities of LFHP NCs as well as the state‐of‐the‐art applications are discussed. With the perspective of their properties and current challenges, we provide an outlook for future directions in this rapidly evolving field to achieve high‐quality LFHP NCs for a broader range of fundamental research and practical applications. 
    more » « less
  2. ; ; ; ; ; (, American Society of Mechanical Engineers)
    Abstract Halide perovskite solar cells (PSCs) are a state-of-the-art photovoltaic technology that exhibit high efficiencies and can be manufactured using roll-to-roll systems. However, PSCs are currently fabricated using sequential layer-by-layer deposition, which constrains the selection of suitable functional layers in the solar cell and limits the processing conditions and techniques that can be used. Lamination via diffusion bonding is a scalable parallel-processing technique that has the capability to overcome some of the challenges of sequential deposition by widening the thermal processing window and reducing the chemical compatibility requirements for PSC manufacturing. However, there remains a lack of detailed understanding of the process-structure-property relationships needed to accelerate the development of high-volume lamination-based manufacturing processes. In this work, we introduce a method to study the process-structure-property relationships of laminated perovskite semiconductors by using a custom photoluminescence (PL) spectroscopy system to quantify spatial heterogeneity in laminated halide perovskite (HP) materials. PL is an important figure-of-merit used to quantify the optoelectronic properties of semiconductor materials used in PV manufacturing. The spatial variation in PL of a laminated HP film is compared to that of an unlaminated HP film. The PL system uses servomotors and an Arduino microcontroller to automate a PL mapping procedure. The PL equipment is tunable to achieve a minimum possible spot size of ∼50 μm, enabling high-resolution measurements. The system is used to measure the PL of 19 separate locations on both a laminated and unlaminated HP material. The results of this study reveal that lamination at optimal conditions will improve the average PL peak intensity of the HP by 55%, indicating that lamination has the potential to improve the optoelectronic characteristics of PSCs. However, lamination also increases the standard deviation of PL peak intensity. Therefore, although lamination improves the PL of HPs, it also induces unwanted spatial heterogeneity. This warrants future studies on the governing physical mechanisms that determine quality control metrics in lamination-based PSC manufacturing. 
    more » « less
  3. ; ; ; ; ; ; ; ; (, Chemical Society Reviews)
    Perovskites have been firmly established as one of the most promising materials for third-generation solar cells. There remain several great and lingering challenges to be addressed regarding device efficiency and stability. The photovoltaic efficiency of perovskite solar cells (PSCs) depends drastically on the charge-carrier dynamics. This complex process includes charge-carrier generation, extraction, transport and collection, each of which needs to be modulated in a favorable manner to achieve high performance. Two-dimensional materials (TDMs) including graphene and its derivatives, transition metal dichalcogenides ( e.g. , MoS 2 , WS 2 ), black phosphorus (BP), metal nanosheets and two-dimensional (2D) perovskite active layers have attracted much attention for application in perovskite solar cells due to their high carrier mobility and tunable work function properties which greatly impact the charge carrier dynamics of PSCs. To date, significant advances have been achieved in the field of TDM-based PSCs. In this review, the recent progress in the development and application of TDMs ( i.e. , graphene, graphdiyne, transition metal dichalcogenides, BP, and others) as electrodes, hole transporting layers, electron transporting layers and buffer layers in PSCs is detailed. 2D perovskites as active absorber materials in PSCs are also summarized. The effect of TDMs and 2D perovskites on the charge carrier dynamics of PSCs is discussed to provide a comprehensive understanding of their optoelectronic processes. The challenges facing the PSC devices are emphasized with corresponding solutions to these problems provided with the overall goal of improving the efficiency and stability of photovoltaic devices. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Scientific Reports)
    Abstract In this paper, we use Polyethylene Oxide (PEO) particles to control the morphology of Formamidinium (FA)-rich perovskite films and achieve large grains with improved optoelectronic properties. Consequently, a planar perovskite solar cell (PSC) is fabricated with additions of 5 wt% of PEO, and the highest PCE of 18.03% was obtained. This solar cell is also shown to retain up to 80% of its initial PCE after about 140 h of storage under the ambient conditions (average relative humidity of 62.5 ± 3.25%) in an unencapsulated state. Furthermore, the steady-state PCE of the PEO-modified PSC device remained stable for long (over 2500 s) under continuous illumination. This addition of PEO particles is shown to enable the tuning of the optoelectronic properties of perovskite films, improvements in the overall photophysical properties of PSCs, and an increase in resistance to the degradation of PSCs. 
    more » « less
  5. ; ; ; (, Journal of Materials Chemistry A)
    In a mesoporous hybrid perovskite solar cell (PSC), the mesoporous scaffold plays key roles in controlling the crystallization of the perovskite material and in the charge carrier transport, and hence is critical for developing highly efficient PSCs. Here we report a study on blending micrometer-long TiO 2 nanorods (NRs) into the commonly used nanoparticles (NPs) to optimize the mesoporous structure, with the aim of enhancing the perovskite material loading and connectivity as well as light harvesting. It was found that with 5–10% of NR incorporation, a uniform scaffold can be spin-coated and the PSC performance was improved. In comparison to the pure NP-based device, the power conversion efficiency was increased by about 27% when 10% of the NRs were incorporated, due to enhanced light harvesting and charge collection. However, with more NR blending, a homogeneous scaffold cannot be formed, resulting in PSC performance degradation. These findings contribute to a better design of mesoporous scaffolds for high-performance PSCs. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email