skip to main content


Title: Interfacial effects on the electrical behavior of elastomer nanoparticulate composites
Polymer nanocomposites exhibit unique effective properties that do not follow conventional effective media approaches. The nanoparticle-polymer interphase has been shown to strongly influence the nanocomposites behavior due o its significant volume when the particles are nano-sized, affording an opportunity to tune the dielectric response of the resulting nanocomposite. In this study, we investigate the effects of TiO2 nanoparticles on the electrical properties and the charges distribution and transport in polydimethylsiloxane (PDMS) nanocomposites. Impedance spectroscopy shows suppression of interfacial Maxwell-Wagner-Sillars (MWS) polarization accompanied by a reduction in the low frequency dielectric permittivity and loss at high temperatures in the presence of the TiO2 nanoparticles. Thermally stimulated discharge current measurements confirm that the suppression of the interfacial polarization relaxations happens by redistributing or depleting the charges through the composite and hindering their mobility, potentially resulting in lower electrical conduction and higher breakdown strength. Although the model materials investigated here are TiO2 nanoparticles and Sylgard 184 PDMS, our findings can be extended to other nanoparticulate-filled elastomer composites to design lightweight dielectrics, actuators and sensors with improved capabilities.  more » « less
Award ID(s):
1661853 1662720
NSF-PAR ID:
10092701
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
SPIE 10968, Behavior and Mechanics of Multifunctional Materials XIII
Volume:
10968
Issue:
109680I
Page Range / eLocation ID:
17
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. The electrical properties of polymer nanocomposites are governed by the behavior of the internal charges. In particular, the interphase around the nanoparticles strongly influences the distribution and mobility of charge carriers within the nanocomposites, which, in turn, impacts the performance of these materials. In this work, we probe the internal charge behavior in the presence of nanoparticles with a focus on the low-frequency regime using a suite of techniques. By investigating the depolarizing currents and the dependence of the dielectric properties on the frequency and temperature, we demonstrate that the interphases redistribute the space charges, increase their trap depth, and suppress the electrode polarization in an elastomeric nanocomposite. Additionally, we study the effect of the nanoparticle content on the dielectric behavior by comparing the internal charge behavior of 1, 2, and 4 vol. % nanocomposites. At only 4 vol. % loading, the mobility of charge carriers is effectively limited, leading to lower dc conductivity compared to the unfilled elastomer, and 1 and 2 vol. % nanocomposites. These findings are based on the model materials used in this study, TiO2 nanoparticles and polydimethylsiloxane, and can be extended to other nanoparticulate-filled elastomer composites to design lightweight dielectrics, actuators, and sensors with improved capabilities. Judicious manipulation of interfacial phenomena in polymer nanocomposites—especially those with a dilute content of nanoparticles—provides a promising path forward for the design of materials with exceptional electrical and other physical properties. 
    more » « less
  2. null (Ed.)
    The synthesis of polymer-grafted nanoparticles (PGNPs) or hairy nanoparticles (HNPs) by tethering of polymer chains to the surface of nanoparticles is an important technique to obtain nanostructured hybrid materials that have been widely used in the formulation of advanced polymer nanocomposites. Ceramic-based polymer nanocomposites integrate key attributes of polymer and ceramic nanomaterial to improve the dielectric properties such as breakdown strength, energy density and dielectric loss. This review describes the ”grafting from” and ”grafting to” approaches commonly adopted to graft polymer chains on NPs pertaining to nano-dielectrics. The article also covers various surface initiated controlled radical polymerization techniques, along with templated approaches for grafting of polymer chains onto SiO2, TiO2, BaTiO3, and Al2O3 nanomaterials. As a look towards applications, an outlook on high-performance polymer nanocomposite capacitors for the design of high energy density pulsed power thin-film capacitors is also presented. 
    more » « less
  3. Abstract

    Van der Waals semiconductors (vdWS) offer superior mechanical and electrical properties and are promising for flexible microelectronics when combined with polymer substrates. However, the self‐passivated vdWS surfaces and their weak adhesion to polymers tend to cause interfacial sliding and wrinkling, and thus, are still challenging the reliability of vdWS‐based flexible devices. Here, an effective covalent vdWS–polymer lamination method with high stretch tolerance and excellent electronic performance is reported. Using molybdenum disulfide (MoS2)and polydimethylsiloxane (PDMS) as a case study, gold–chalcogen bonding and mercapto silane bridges are leveraged. The resulting composite structures exhibit more uniform and stronger interfacial adhesion. This enhanced coupling also enables the observation of a theoretically predicted tension‐induced band structure transition in MoS2. Moreover, no obvious degradation in the devices’ structural and electrical properties is identified after numerous mechanical cycle tests. This high‐quality lamination enhances the reliability of vdWS‐based flexible microelectronics, accelerating their practical applications in biomedical research and consumer electronics.

     
    more » « less
  4. Abstract

    Both experimental results and theoretical models suggest the decisive role of the filler–matrix interfaces on the dielectric, piezoelectric, pyroelectric, and electrocaloric properties of ferroelectric polymer nanocomposites. However, there remains a lack of direct structural evidence to support the so‐called interfacial effect in dielectric nanocomposites. Here, a chemical mapping of the interfacial coupling between the nanofiller and the polymer matrix in ferroelectric polymer nanocomposites by combining atomic force microscopy–infrared spectroscopy (AFM–IR) with first‐principles calculations and phase‐field simulations is provided. The addition of ceramic fillers into a ferroelectric polymer leads to augmentation of the local conformational disorder in the vicinity of the interface, resulting in the local stabilization of the all‐transconformation (i.e., the polar β phase). The formation of highly polar and inhomogeneous interfacial regions, which is further enhanced with a decrease of the filler size, has been identified experimentally and verified by phase‐field simulations and density functional theory (DFT) calculations. This work offers unprecedented structural insights into the configurational disorder‐induced interfacial effect and will enable rational design and molecular engineering of the filler–matrix interfaces of electroactive polymer nanocomposites to boost their collective properties.

     
    more » « less
  5. Both the dispersion state of nanoparticles (NPs) within polymer nanocomposites (PNCs) and the dynamical state of the polymer altered by the presence of the NP/polymer interfaces have a strong impact on the macroscopic properties of PNCs. In particular, mechanical properties are strongly affected by percolation of hard phases, which may be NP networks, dynamically modified polymer regions, or combinations of both. In this article, the impact on dispersion and dynamics of surface modification of the NPs by short monomethoxysilanes with eight carbons in the alkyl part (C8) is studied. As a function of grafting density and particle content, polymer dynamics is followed by broadband dielectric spectroscopy and analyzed by an interfacial layer model, whereas the particle dispersion is investigated by small-angle X-ray scattering and analyzed by reverse Monte Carlo simulations. NP dispersions are found to be destabilized only at the highest grafting. The interfacial layer formalism allows the clear identification of the volume fraction of interfacial polymer, with its characteristic time. The strongest dynamical slow-down in the polymer is found for unmodified NPs, while grafting weakens this effect progressively. The combination of all three techniques enables a unique measurement of the true thickness of the interfacial layer, which is ca. 5 nm. Finally, the comparison between longer (C18) and shorter (C8) grafts provides unprecedented insight into the efficacy and tunability of surface modification. It is shown that C8-grafting allows for a more progressive tuning, which goes beyond a pure mass effect. 
    more » « less