skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Nanocellulose-Block Copolymer Films for the Removal of Emerging Organic Contaminants from Aqueous Solutions
The prevalence of emerging organic contaminants (EOCs) in ground and surface water has sparked the search for more effective methods to remove EOCs from the environment. In pursuit of a solution for this environmental concern, herein we present the development of reusable films based on cellulose nanofibers (CNFs) and the block copolymer, poly(4-vinylpyridine-b-ethylene oxide) (P4VP-PEO) to adsorb sulfamethoxazole (SMX) as an EOC model compound. We hypothesize that the adsorption of SMX was achieved mainly by π-π interactions between the pyridine functionalities of the block copolymer and the electron deficient phenyl group of the SMX. Preceding preparation of the films, CNFs were modified with the alkoxysilane trimethoxy(2-phenylethyl)silane (TMPES) to increase their stability in aqueous solution. After the addition of P4VP-PEO, the process was completed by filtration followed by oven-drying. XPS and FTIR were employed to confirm the addition of TMPES and P4VP-PEO, respectively. Adsorption batch experiments were performed in aqueous solutions of SMX at a neutral pH, obtaining adsorptions of up to 0.014 mmol/g in a moderate time of 60 min. For the reusability tests, films were immersed in ethanol 95 wt.% to elude the adsorbed SMX, rinsed with deionized (DI) water, and dried at room temperature to be reused in a new adsorption cycle. We found that this new composite material could be reused several times with negligible loss of adsorption capacity. The films presented have been shown to be of substantial importance for water remediation as they find direct application in the adsorption of electron deficient aromatic compounds and are reusable.  more » « less
Award ID(s):
1560278 1757365 1736093
PAR ID:
10092797
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Materials
Volume:
12
Issue:
2
ISSN:
1996-1944
Page Range / eLocation ID:
230
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Designed Monomers and Polymers)
    The thermoresponsive properties of poloxamine (tetra-branch PEO-PPO block copolymer) hydrogels are related to several variables. Of particular interest to this study were the molecular weight of the polymer, the molar ratio between PEO and PPO blocks, and the concentration of the aqueous solution. Accurately controlling the thermoresponsive behaviors of the polymer is critical to the application of such materials; therefore, the structure–property relationship of tetra-branch PEO-PPO block copolymer was studied by synthesis via anionic ring-opening polymerization (AROP). The structure–property relationships were studied by measuring the thermoresponsive behavior via differential scanning calorimetry (DSC) and developing an empirical model which statistically fit the collected data. This empirical model was then used for designing poloxamines that have critical micellization temperatures (CMT) between room temperature and physiological temperature. The model was validated with three polymers that targeted a CMT of 308 K (35°C). The empirical model showed great success in guiding the synthesis of poloxamines showing a temperature difference of less than 3 K between the predicted and the observed CMTs. This study showed a great potential of using an empirical model to set synthesis parameters to control the properties of the polymer products. 
    more » « less
  2. ; ; ; ; ; (, Small)
    Abstract Cobalt phthalocyanine (CoPc) is a promising molecular catalyst for aqueous electroreduction of CO2, but its catalytic activity is limited by aggregation at high loadings. Codeposition of CoPc onto electrode surfaces with the coordinating polymer poly(4‐vinylpyridine) (P4VP) mitigates aggregation in addition to providing other catalytic enhancements. Transmission and diffuse reflectance UV–vis measurements demonstrate that a combination of axial coordination and π‐stacking effects from pyridyl moieties in P4VP serve to disperse cobalt phthalocyanine in deposition solutions and help prevent reaggregation in deposited films. Polymers lacking axial coordination, such as Nafion, are significantly less effective at cobalt phthalocyanine dispersion in both the deposition solution and in the deposited films. SEM images corroborate these findings through particle counts and morphological analysis. Electrochemical measurements show that CoPc codeposited with P4VPonto carbon electrode surfaces reduces CO2with higher activity and selectivity compared to the catalyst codeposited with Nafion. 
    more » « less
  3. ; ; ; ; ; ; (, Journal of Polymer Science)
    ABSTRACT Cobaltocenium‐containing polyelectrolyte block copolymer nanoparticles were prepared via polymerization‐induced self‐assembly (PISA) using aqueous dispersion RAFT polymerization. The cationic steric stabilizer was a macromolecular chain‐transfer agent (macro‐CTA) based on poly(2‐cobaltocenium amidoethyl methacrylate chloride) (PCoAEMACl), and the core‐forming block was poly(2‐hydroxypropyl methacrylate) (PHPMA). Stable cationic spherical nanoparticles were formed in aqueous solution with low dispersity without adding any salts. The chain extension of macro‐CTA with HPMA was efficient and fast. The effects of block copolymer compositions, solid content, charge density, and addition of salts were studied. It was found that the degree of polymerization of both the stabilizer PCoAEMACl and the core‐forming PHPMA had a strong influence on the size of nanoparticles. © 2019 Wiley Periodicals, Inc. J. Polym. Sci.2020,58, 77–83 
    more » « less
  4. ; ; ; (, Angewandte Chemie International Edition)
    Abstract In recent decades, extensive studies have been devoted to assembling nanoparticles (NPs) into various ordered structures to achieve novel optical properties. However, it still remains a challenging task to assemble NPs into cyclic one‐dimensional (1D) shapes, such as rings and frames. Herein, we report a directed assembly method to precisely assemble NPs into well‐defined, free‐standing frames using polymer single crystals (PSCs) as the template. Preformed poly(ethylene oxide) (PEO) single crystals were used as the template to direct the crystallization of block copolymer (BCP) poly(ethylene oxide)‐b‐poly(4‐vinylpyridine) (PEO‐b‐P4VP), which directs the gold NPs (AuNPs) to form AuNP frames. By controlling the PSC growth, we were able to, for the first time, precisely tune both the size and width of the AuNP frame. These novel AuNP frames topologically resemble NP nanorings and cyclic polymer chains, and show unique surface plasmon resonance (SPR) behaviors. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Soft Matter)
    The separation of oil from water and filtration of aqueous solutions and dispersions are critical issues in the processing of waste and contaminated water treatment. Membrane-based technology has been proven as an effective method for the separation of oil from water. In this research, novel vertical nanopores membrane, via oriented cylindrical block copolymer (BCP) films, suitable for oil/water filtration has been designed, fabricated and tested. We used a ∼100 nm thick model poly(styrene- block -methymethacrylate) (PS- b -PMMA) BCP as the active top nanofiltration layer, processed using a roll-to-roll (R2R) method of cold zone annealing (CZA) to obtain vertical orientation, followed by ultraviolet (UV) irradiation selective etch of PMMA cylinders to form vertically oriented nanopores as a novel feature compared to meandering nanopores in other reported BCP systems. The cylindrical nanochannels are hydrophilic, and have a uniform pore size (∼23 nm), a narrow pore size distribution and a high nanopore density (∼420 per sq. micron). The bottom supporting layer is a conventional microporous polyethersulfone (PES) membrane. The created asymmetric membrane is demonstrated to be effective for oil/water extraction with a modestly high throughput rate comparable to other RO/NF membranes. The molecular weight dependent filtration of a water soluble polymer, PEO, demonstrates the broader applications of such membranes. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email