An official website of the United States government
To develop active materials that can efficiently respond to external stimuli with designed mechanical motions is a major obstacle that have hindered the realization nanomachines and nanorobots. Here, we present our finding and investigation of an original working mechanism that allows multifold reconfigurable motion control in both rotation and alignment of semiconductor micromotors in an AC electric field with simple visible-light stimulation. In our previous work, we reported the instantly switchable electrorotation owing to the optically tunable imaginary part of electric polarization of a semiconductor nanowire in aqueous suspension[1]. Here we provide further experimental confirmation along with numerical simulation. Moreover, according to the Kramers-Kronig relation, the real part of the electric polarization should also be optically tunable, which can be experimentally verified with tests of electro-alignment of a nanowire. Here, we report our experimental study of light effect on electro-alignment along with theoretical simulation to complete the investigation of opto-tunable electric polarization of a semiconductor nanowire. Finally, we demonstrate a micromotor with periodically oscillating rotation with simple asymmetric exposure to a light pattern. This research could inspire development of a new class of micro/nanomachines with agile and spatially defined maneuverability.
more »
« less
Visible light–gated reconfigurable rotary actuation of electric nanomotors
Highly efficient and widely applicable working mechanisms that allow nanomaterials and devices to respond to external stimuli with controlled mechanical motions could make far-reaching impact to reconfigurable, adaptive, and robotic nanodevices. We report an innovative mechanism that allows multifold reconfiguration of mechanical rotation of semiconductor nanoentities in electric ( E ) fields by visible light stimulation. When illuminated by light in the visible-to-infrared regime, the rotation speed of semiconductor Si nanowires in E -fields can instantly increase, decrease, and even reverse the orientation, depending on the intensity of the applied light and the AC E -field frequency. This multifold rotational reconfiguration is highly efficient, instant, and facile. Switching between different modes can be simply controlled by the light intensity at an AC frequency. We carry out experiments, theoretical analysis, and simulations to understand the underlying principle, which can be attributed to the optically tunable polarization of Si nanowires in an aqueous suspension and an external E -field. Finally, leveraging this newly discovered effect, we successfully differentiate semiconductor and metallic nanoentities in a noncontact and nondestructive manner. This research could inspire a new class of reconfigurable nanoelectromechanical and nanorobotic devices for optical sensing, communication, molecule release, detection, nanoparticle separation, and microfluidic automation.
more »
« less
- PAR ID:
- 10095752
- Date Published:
- Journal Name:
- Science Advances
- Volume:
- 4
- Issue:
- 9
- ISSN:
- 2375-2548
- Page Range / eLocation ID:
- eaau0981
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract To develop active nanomaterials that can instantly respond to external stimuli with designed mechanical motions is an important step towards the realization of nanorobots. Herein, we present our finding of a versatile working mechanism that allows instantaneous change of alignment direction and speed of semiconductor nanowires in an external electric field with simple visible-light exposure. The light induced alignment switch can be cycled over hundreds of times and programmed to express words in Morse code. With theoretical analysis and simulation, the working principle can be attributed to the optically tuned real-part (in-phase) electrical polarization of a semiconductor nanowire in aqueous suspension. The manipulation principle is exploited to create a new type of microscale stepper motor that can readily switch between in-phase and out-phase modes, and agilely operate independent of neighboring motors with patterned light. This work could inspire the development of new types of micro/nanomachines with individual and reconfigurable maneuverability for many applications.more » « less
-
III-Nitride light-emitting diodes (LEDs) and laser diodes (LDs) are light sources covering ultraviolet (UV) and visible spectral regimes, which offer benefits including compact size, wavelength tuning, long lifetime, and sustainability. UV light sources have a range of applications in the fields of biology and medicine, such as sterilization and the purification of both water and air, where visible light emitters have been used in miniaturized photonic devices for optogenetic applications and other light-based therapies. Those III-Nitride light sources provide tremendous potential to be integrated with silicon (Si)-based lab-on-a-chip (LOC) technology, which typically requires the coupling of an external light source through fiber optic cable, limiting the field deployment of the devices. Integrating an on-chip III-Nitride light source with these devices opens the door to complete LOC technology, allowing for the simultaneous detection of multiple bio agents on a single platform without the need for external photonic sources. While most integrated microsystems still rely on wafer bonding at the device or wafer level, one promising method to achieve the integration of III-nitride UV and visible LEDs and LDs with conventional Si photonics and complementary metal-oxide-semiconductor (CMOS) platforms is through the use of micro-transfer printing (µTP). µTP has greater tolerances in alignment than techniques such as flip-chip integration and allows for the transfer of many devices at once. Additionally, the µTP process does not call for the complex and high temperature processing required for standard wafer bonding or necessitate complicated growth and lattice matching needed for monolithic integration. To enable µTP, an elastomeric, such as polydimethylsiloxane (PDMS), is utilized to create a transfer stamp that is employed for the precise selection of fabricated semiconductor devices for transfer from a source wafer to a target wafer. III-Nitride LEDs or LDs epitaxial structures are grown on a source wafer and fabricated through the creation of tethered coupons, or individual devices. This is accomplished by utilizing III-nitride materials grown on (111) Si. These devices can be fabricated through standard lithography and etching processes, etching down to the (111) Si substrate. A larger mesa can be patterned and etched into the Si substrate, exposing the sidewalls for wet chemical etching. The finished devices are then encapsulated in SiNxthrough plasma enhanced chemical vapor deposition (PECVD), which is patterned through standard lithography to define tethers and anchors for the subsequent wet etch. The fabricated devices are oriented in such a way as to take advantage of the difference in etch rates (>100x) of Si(110) and Si(111) in potassium hydroxide (KOH), where etching proceeds along the <110> direction. After KOH etching, the devices are left encapsulated in SiNxand suspended over the silicon substrate with an air gap, while the anchors and tethers are left largely unaffected.This enables the elastomer stamp to press down, breaking the tethers, and releasing the device. The stamp is then able to transfer the device to a target wafer that has been coated and patterned with InterVia, a spin-on dielectric material that acts as an adhesion layer. The stamp is pressed into the target wafer in such a way that the device is adhered to the target and released from the elastomer stamp. This technique can be applied to LEDs and LDs grown on (111) Si, allowing for the heterogeneous integration of III-nitride LED and LDs with conventional CMOS and Si photonic integrated circuits (PICs) as on-chip light sources, opening the door to complete LOC technology without the need for additional external photonic sources.more » « less
-
Doped semiconductor nanowires are emerging as next-generation electronic colloidal materials, and the efficient manipulation of such nanostructures is crucial for technological applications. In fluid suspension, pn nanowires (pn NWs), unlike homogeneous nanowires, have a permanent dipole, and thus, experience a torque under an external DC field that orients the nanowire with its n-type end in the direction of the field. Here, we quantitatively measure the permanent dipoles of various Si nanowire pn diodes and investigate their origin. By comparing the dipoles of pn NWs of different lengths and radii, we show that the permanent dipole originates from non-uniform surface-charge distributions, rather than the internal charges at the p–n junction as was previously proposed. This understanding of the mechanism for pn NWs orientation has relevance to the manipulation, assembly, characterization, and separation of nanowire electronics by electric fields.more » « less
-
null (Ed.)Pure liquids in thermodynamic equilibrium are structurally homogeneous. In liquid crystals, flow and light pulses are used to create reconfigurable domains with polar order. Moreover, through careful engineering of concerted microfluidic flows and localized optothermal fields, it is possible to achieve complete control over the nucleation, growth, and shape of such domains. Experiments, theory, and simulations indicate that the resulting structures can be stabilized indefinitely, provided the liquids are maintained in a controlled nonequilibrium state. The resulting sculpted liquids could find applications in microfluidic devices for selective encapsulation of solutes and particles into optically active compartments that interact with external stimuli.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1126/sciadv.aau0981
