skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Electrodeposition of pure phase SnSb exhibiting high stability as a sodium-ion battery anode
Electrodeposition of pure phase SnSb is reported for the first time. The purity of the product is important, as the impure phase is found to be detrimental to the material's lifetime as a sodium-ion anode. The directly deposited electrode was able to retain 95% capacity after 300 cycles, and only fall below 80% capacity retention after 800 cycles when cycled versus sodium.  more » « less
Award ID(s):
1710672
PAR ID:
10096720
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Chemical Communications
ISSN:
1359-7345
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; (, Energy & Environmental Science)
    null (Ed.)
    Sodium metal battery (SMB, NMB) anodes can become dendritic due to an electrochemically unstable native Na-based solid electrolyte interphase (SEI). Herein Li-ion activated tin sulfide graphene nanocomposite membrane (A-SnS–G) is employed as an artificial SEI layer, allowing cyclability of record-thin 100 μm Na metal foils. The thin Na metal is prepared by a self-designed metallurgical rolling protocol. A-SnS–G is initially placed onto the polypropylene (PP) separator but becomes in situ transferred onto the Na metal surface. Symmetric metal cells protected by A-SnS–G achieve low-overpotential extended high-rate cycling in a standard carbonate electrolyte (EC : DEC = 1 : 1, 5% FEC). Accumulated capacity of 1000 mA h cm −2 is obtained after 500 cycles at 4 mA cm −2 , with accumulated capacity-to-foil capacity (A/F) ratio of 90.9. This is among the most favorable cycle life, accumulated capacity, and anode utilization combinations reported. Protection by non-activated SnS–G membrane yields significantly worse cycling, albeit still superior to the baseline unprotected sodium. Post-mortem and dedicated light optical analysis indicate that metal swelling, dendrite growth and dead metal formation is extensive for the unprotected sample, but is suppressed with A-SnS–G. Per XPS, post-100 cycles near-surface structure of A-SnS–G is rich in metallic Sn alloys and inorganic carbonate salts. Even after 300 cycles, Li-based SEI components ROCO 2 -Li, Li 2 CO 3 and LiF are detected with A-SnS–G. As a proof of principle, an SMB with a high mass loading (6 mg cm −2 ) NVP cathode and a A-SnS–G protected anode delivered extended cyclability, achieving 74 mA h g −1 after 400 cycles at 0.4C. 
    more » « less
  2. ; ; (, Journal of The Electrochemical Society)
    Tin antimonide (SnSb) is a promising alloying anode for sodium-ion batteries due to its high theoretical capacity and relative stability. The material is popular in the battery field, but, to our knowledge, few studies have been conducted on the influence of altering Sn and Sb stoichiometry on anode capacity retention and efficiency over time. Here, Sn-Sb electrodes were synthesized with compositional control by optimizing electrodeposition parameters and stoichiometry in solution and the alloys were cycled in sodium-ion half-cells to investigate the effects of stoichiometry on both performance and electrochemical phenomena. Higher concentrations of antimony deposited into the films were found to best maintain specific capacity over 270 cycles in the tin-antimony alloys, with each cell showing a slow, gradual decrease in capacity. We identified that a 1:3 ratio of Sn:Sb retained a specific capacity of 486 mAh g−1after 270 cycles, highlighting a need to explore this material further. These results demonstrate how control over stoichiometry in Sn-Sb electrodes is a viable method for tuning performance. 
    more » « less
  3. ; ; ; ; ; ; (, Communications Chemistry)
    Abstract Rechargeable sodium-ion batteries are receiving intense interest as a promising alternative to lithium-ion batteries, however, the absence of high-performance anode materials limits their further commercialization. Here we prepare cobalt-doped tin disulfide/reduced graphene oxide nanocomposites via a microwave-assisted hydrothermal approach. These nanocomposites maintain a capacity of 636.2 mAh g−1after 120 cycles under a current density of 50 mA g−1, and display a capacity of 328.3 mA h g−1after 1500 cycles under a current density of 2 A g−1. The quantitative capacitive analysis demonstrates that the electrochemical performance of the nanocomposite originates from the combined effects of cobalt and sulfur doping, resulting in the enhanced pseudocapacitive contribution (52.8 to 89.8% at 1 mV s−1) of tin disulfide. This work provides insight into tuning the structure of layered transition metal dichalcogenides via heteroatom doping to develop high-performance anode materials for sodium-ion batteries. 
    more » « less
  4. ; ; ; (, Journal of The Electrochemical Society)
    Abstract Intermittent renewable energy sources can mitigate climate change, but they require high-performance, reliable batteries. The widely used lithium-ion batteries contain Li, Co, and Ni, and the growing demand for these elements, together with their relatively limited sources, has raised concerns about their supply chain stability. Sodium-ion batteries have become an economical alternative. Sodium vanadium phosphate, Na3V2(PO4)3 (NVP), is a compelling candidate with high stability and ionic conductivity due to its polyanionic sodium superionic conductor (NASICON) structure. However, NVP suffers from poor electronic conductivity and requires hierarchical morphology to allow facile ion and electron transfer. Spray-drying has been used to achieve hierarchical secondary particle structures, but the foremost reported NVP syntheses rely on either flammable/toxic organic solvents or expensive nanocarbon additives. In this study, we spray-dry an aqueous suspension without using expensive carbon additives. The obtained NVP sodium-ion half cells showed very high reversible capacity (114.7 mAh g-1 at 0.2C), high rate capability (80.8% capacity retention at 30C), and stable cycling performance (96.7% capacity retention after 1,500 cycles at 10C). This superior performance demonstrates the great promise for NVP batteries as an alternative energy storage option to traditional lithium-ion batteries. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; (, Gels)
    Sodium metal batteries are an emerging technology that shows promise in terms of materials availability with respect to lithium batteries. Solid electrolytes are needed to tackle the safety issues related to sodium metal. In this work, a simple method to prepare a mechanically robust and efficient soft solid electrolyte for sodium batteries is demonstrated. A task-specific iongel electrolyte was prepared by combining in a simple process the excellent performance of sodium metal electrodes of an ionic liquid electrolyte and the mechanical properties of polymers. The iongel was synthesized by fast (<1 min) UV photopolymerization of poly(ethylene glycol) diacrylate (PEGDA) in the presence of a saturated 42%mol solution of sodium bis(fluorosulfonyl)imide (NaFSI) in trimethyl iso-butyl phosphonium bis(fluorosulfonyl)imide (P111i4FSI). The resulting soft solid electrolytes showed high ionic conductivity at room temperature (≥10−3 S cm−1) and tunable storage modulus (104–107 Pa). Iongel with the best ionic conductivity and good mechanical properties (Iongel10) showed excellent battery performance: Na/iongel/NaFePO4 full cells delivered a high specific capacity of 140 mAh g−1 at 0.1 C and 120 mAh g−1 at 1 C with good capacity retention after 30 cycles. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email