An official website of the United States government
There are numerous reports of photo(electro)catalysts demonstrating activity for nitrogen reduction to ammonia and a few reports of photo(electro)catalysts demonstrating activity for nitrogen oxidation to nitric acid. However, progress in advancing solar-to-fertilizer applications is slow, due in part to the pace of catalyst screening. Most evaluations of photo(electro)catalysts activity occur using batch reactors. This is because common product analyses require accumulation of ammonia or nitric acid in the reactor to overcome instrument detection limits. The primary aim here is to examine the use of an electroanalytical method, rotating ring disk electrode voltammetry (RRDE), to detect ammonia produced by a nitrogen fixing photo(electro)catalyst. To examine the potential for RRDE, we investigated a photo(electro)catalyst known to reduce nitrogen to ammonia (titania), while varying the applied electrochemical potential and degree of illumination on the disk. We show that the observed ammonia oxidation at the ring electrode corresponds strongly with ammonia measurements obtained from the bulk electrolyte. Indicating that RRDE may be effective for catalyst screening. The chief limitation of this approach is the need for an alkaline electrolyte. In addition, this approach does not rule out the presence of adventitious ammonia.
more »
« less
Influence of carbonaceous species on aqueous photo-catalytic nitrogen fixation by titania
For decades, reports have suggested that photo-catalytic nitrogen fixation by titania in an aqueous environment is possible. Yet a consensus does not exist regarding how the reaction proceeds. Furthermore, the presence of an aqueous protonated solvent and the similarity between the redox potential for nitrogen and proton reduction suggest that ammonia production is unlikely. Here, we re-investigate photo-catalytic nitrogen fixation by titania in an aqueous environment through a series of photo-catalytic and electrocatalytic experiments. Photo-catalytic testing reveals that mineral phase and metal dopants play a marginal role in promoting nitrogen photofixation, with ammonia production increasing when the majority phase is rutile and with iron dopants. However, the presence of a trace amount of adsorbed carbonaceous species increased the rate of ammonia production by two times that observed without adsorbed carbon based species. This suggests that carbon species play a potential larger role in mediating the nitrogen fixation process over mineral phase and metal dopants. We also demonstrate an experimental approach aimed to detect low-level ammonia production from photo-catalysts using rotating ring disk electrode experiments conducted with and without illumination. Consistent with the photocatalysis, ammonia is only discernible at the ring with rutile phase titania, but not with mixed-phase titania. Rotating ring disk electrode experiments may also provide a new avenue to attain a higher degree of precision in detecting ammonia at low levels.
more »
« less
- Award ID(s):
- 1846611
- PAR ID:
- 10104509
- Date Published:
- Journal Name:
- Faraday Discussions
- Volume:
- 215
- ISSN:
- 1359-6640
- Page Range / eLocation ID:
- 379 to 392
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This work reports a combined experimental and computational study of the activation of an otherwise catalytically inactive cobalt complex, [Co(TIM)Br2]+, for aqueous nitrite reduction. The presence of phosphate buffer leads to efficient electrocatalysis, with rapid reduction to ammonium occurring close to the thermodynamic potential and with high Faradaic efficiency. At neutral pH, increasing buffer concentrations increase catalytic current while simultaneously decreasing overpotential, although high concentrations have an inhibitory effect. Controlled potential electrolysis and rotating ring-disk electrode experiments indicate that ammonium is directly produced from nitrite by [Co(TIM)Br2]+, along with hydroxylamine. Mechanistic investigations implicate a vital role for the phosphate buffer, specifically as a proton shuttle, although high buffer concentrations inhibit catalysis. These results indicate a role for buffer in the design of electrocatalysts for nitrogen oxide conversion.more » « less
-
Brown Carbon Aerosol Formation by Multiphase Catechol Photooxidation in the Presence of Soluble IronCatechol (1,2-benzenediol), a common phenolic species emitted during biomass burning, is both redox active and metal chelating. When oxidized by OH radicals in the aqueous phase, it rapidly forms brown carbon (BrC). Here, we report chamber studies of the multiphase chemistry of catechol using HOOH as an OH radical source, soluble iron, simulated sunlight, and either deliquesced or solid-phase seed particles. BrC of remarkable similarity (MAC365 = 1.7 ±0.2 m2 g-1, “medium-BrC” category) was produced whenever gas-phase catechol was photolyzed in the chamber, with or without the presence of an OH radical source, soluble iron, or deliquesced aerosol. The speed and quantity of BrC formation varied, however. While BrC production was slower in the absence of an OH radical source, multiple lines of evidence suggest that OH generation via photosensitization by surface-adsorbed catechol can still generate BrC. Fenton chemistry actively occurred in surface-adsorbed water layers even below the seed particle deliquescence point, leading to significant production of gas-phase benzoquinone. Ratios of BrC and secondary organic aerosol (SOA) relative to catechol concentrations were highest in the presence of trace amounts of soluble iron, HOOH, and simulated sunlight, indicating that photo-Fenton chemistry contributed substantially to BrC and SOA formation by catechol. Finally, we observed that BrC and SOA formation by catechol / photo-Fenton chemistry can occur efficiently even at 40% RH. These results are consistent with catechol being a major source of secondary BrC in biomass burning plumes, even at moderate relative humidity.more » « less
-
null (Ed.)Low-temperature direct ammonia fuel cells (DAFCs) use carbon-neutral ammonia as a fuel, which has attracted increasing attention recently due to ammonia's low source-to-tank energy cost, easy transport and storage, and wide availability. However, current DAFC technologies are greatly limited by the kinetically sluggish ammonia oxidation reaction (AOR) at the anode. Herein, we report an AOR catalyst, in which ternary PtIrZn nanoparticles with an average size of 2.3 ± 0.2 nm were highly dispersed on a binary composite support comprising cerium oxide (CeO 2 ) and zeolitic imidazolate framework-8 (ZIF-8)-derived carbon (PtIrZn/CeO 2 -ZIF-8) through a sonochemical-assisted synthesis method. The PtIrZn alloy, with the aid of abundant OH ad provided by CeO 2 and uniform particle dispersibility contributed by porous ZIF-8 carbon (surface area: ∼600 m 2 g −1 ), has shown highly efficient catalytic activity for the AOR in alkaline media, superior to that of commercial PtIr/C. The rotating disk electrode (RDE) results indicate a lower onset potential (0.35 vs. 0.43 V), relative to the reversible hydrogen electrode at room temperature, and a decreased activation energy (∼36.7 vs. 50.8 kJ mol −1 ) relative to the PtIr/C catalyst. Notably, the PtIrZn/CeO 2 -ZIF-8 catalyst was assembled with a high-performance hydroxide anion-exchange membrane to fabricate an alkaline DAFC, reaching a peak power density of 91 mW cm −2 . Unlike in aqueous electrolytes, supports play a critical role in improving uniform ionomer distribution and mass transport in the anode. PtIrZn nanoparticles on silicon dioxide (SiO 2 ) integrated with carboxyl-functionalized carbon nanotubes (CNT–COOH) were further studied as the anode in a DAFC. A significantly enhanced peak power density of 314 mW cm −2 was achieved. Density functional theory calculations elucidated that Zn atoms in the PtIr alloy can reduce the theoretical limiting potential of *NH 2 dehydrogenation to *NH by ∼0.1 V, which can be attributed to a Zn-modulated upshift of the Pt–Ir d-band that facilitates the N–H bond breakage.more » « less
-
The cobalt pyridinophane complex [Co( H N4)Cl 2 ] + ( H N4 = 3,7-diaza-1,5(2,6)-dipyridinacyclooctaphane) is converted under catalytic conditions to an electrode-adsorbed species. Aqueous Co 2+ solutions similarly deposit a species under these conditions. Surface characterization reveals the formation of Co nanoparticles. These nanoparticles are active in the electrocatalytic redution of aqueous nitrate.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/C8FD00191J
