An official website of the United States government
Temperature sensing and control systems are widely used in the closed-loop control of critical processes such as maintaining the thermal stability of patients, or in alarm systems for detecting temperature-related hazards. However, the security of these systems has yet to be completely explored, leaving potential attack surfaces that can be exploited to take control over critical systems. In this paper we investigate the reliability of temperature-based control systems from a security and safety perspective. We show how unexpected consequences and safety risks can be induced by physical-level attacks on analog temperature sensing components. For instance, we demonstrate that an adversary could remotely manipulate the temperature sensor measurements of an infant incubator to cause potential safety issues, without tampering with the victim system or triggering automatic temperature alarms. This attack exploits the unintended rectification effect that can be induced in operational and instrumentation amplifiers to control the sensor output, tricking the internal control loop of the victim system to heat up or cool down. Furthermore, we show how the exploit of this hardware-level vulnerability could affect different classes of analog sensors that share similar signal conditioning processes. Our experimental results indicate that conventional defenses commonly deployed in these systems are not sufficient to mitigate the threat, so we propose a prototype design of a low-cost anomaly detector for critical applications to ensure the integrity of temperature sensor signals.
more »
« less
Security for safety: a path toward building trusted autonomous vehicles
Automotive systems have always been designed with safety in mind. In this regard, the functional safety standard, ISO 26262, was drafted with the intention of minimizing risk due to random hardware faults or systematic failure in design of electrical and electronic components of an automobile. However, growing complexity of a modern car has added another potential point of failure in the form of cyber or sensor attacks. Recently, researchers have demonstrated that vulnerability in vehicle's software or sensing units could enable them to remotely alter the intended operation of the vehicle. As such, in addition to safety, security should be considered as an important design goal. However, designing security solutions without the consideration of safety objectives could result in potential hazards. Consequently, in this paper we propose the notion of security for safety and show that by integrating safety conditions with our system-level security solution, which comprises of a modified Kalman filter and a Chi-squared detector, we can prevent potential hazards that could occur due to violation of safety objectives during an attack. Furthermore, with the help of a car-following case study, where the follower car is equipped with an adaptive-cruise control unit, we show that our proposed system-level security solution preserves the safety constraints and prevent collision between vehicle while under sensor attack.
more »
« less
- Award ID(s):
- 1818500
- PAR ID:
- 10105495
- Date Published:
- Journal Name:
- Proceedings of the International Conference on Computer-Aided Design
- Page Range / eLocation ID:
- 1 to 6
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)In Autonomous Driving (AD) systems, perception is both security and safety critical. Despite various prior studies on its security issues, all of them only consider attacks on cameraor LiDAR-based AD perception alone. However, production AD systems today predominantly adopt a Multi-Sensor Fusion (MSF) based design, which in principle can be more robust against these attacks under the assumption that not all fusion sources are (or can be) attacked at the same time. In this paper, we present the first study of security issues of MSF-based perception in AD systems. We directly challenge the basic MSF design assumption above by exploring the possibility of attacking all fusion sources simultaneously. This allows us for the first time to understand how much security guarantee MSF can fundamentally provide as a general defense strategy for AD perception. We formulate the attack as an optimization problem to generate a physically-realizable, adversarial 3D-printed object that misleads an AD system to fail in detecting it and thus crash into it. To systematically generate such a physical-world attack, we propose a novel attack pipeline that addresses two main design challenges: (1) non-differentiable target camera and LiDAR sensing systems, and (2) non-differentiable cell-level aggregated features popularly used in LiDAR-based AD perception. We evaluate our attack on MSF algorithms included in representative open-source industry-grade AD systems in real-world driving scenarios. Our results show that the attack achieves over 90% success rate across different object types and MSF algorithms. Our attack is also found stealthy, robust to victim positions, transferable across MSF algorithms, and physical-world realizable after being 3D-printed and captured by LiDAR and camera devices. To concretely assess the end-to-end safety impact, we further perform simulation evaluation and show that it can cause a 100% vehicle collision rate for an industry-grade AD system. We also evaluate and discuss defense strategies.more » « less
-
Automated Lane Centering (ALC) systems are convenient and widely deployed today, but also highly security and safety critical. In this work, we are the first to systematically study the security of state-of-the-art deep learning based ALC systems in their designed operational domains under physical-world adversarial attacks. We formulate the problem with a safetycritical attack goal, and a novel and domain-specific attack vector: dirty road patches. To systematically generate the attack, we adopt an optimization-based approach and overcome domain-specific design challenges such as camera frame interdependencies due to attack-influenced vehicle control, and the lack of objective function design for lane detection models. We evaluate our attack on a production ALC using 80 scenarios from real-world driving traces. The results show that our attack is highly effective with over 97.5% success rates and less than 0.903 sec average success time, which is substantially lower than the average driver reaction time. This attack is also found (1) robust to various real-world factors such as lighting conditions and view angles, (2) general to different model designs, and (3) stealthy from the driver’s view. To understand the safety impacts, we conduct experiments using software-in-the-loop simulation and attack trace injection in a real vehicle. The results show that our attack can cause a 100% collision rate in different scenarios, including when tested with common safety features such as automatic emergency braking. We also evaluate and discuss defenses.more » « less
-
The Battery Management System (BMS) plays a crucial role in modern energy storage technologies, ensuring battery safety, performance, and longevity. However, as the BMS becomes more sophisticated and interconnected, it faces increasing cybersecurity challenges that can lead to catastrophic failures and safety hazards. This paper provides a comprehensive overview of cyberattacks targeting both traditional and wireless BMS. It explores various attack vectors, including malware injection, electromagnetic interference (EMI), temperature sensing manipulation, sensor malfunctioning and fault injection, and jamming attacks on modern BMS. Through threat modeling and vulnerability analysis, this paper examines the potential impacts on BMS functionality, safety, and performance. We highlight vulnerabilities associated with different BMS architectures and components, emphasizing the need for robust cybersecurity measures to protect against emerging threats. Cybersecurity measures are essential to protect the system from potential threats that could trigger false alarms, cause malfunctions, or lead to dangerous failures. Unauthorized access or tampering with the BMS can disrupt its fault response mechanisms, jeopardizing system performance and associated resources. Key cybersecurity strategies include intrusion detection systems (IDS), crypto-based authentication, secure firmware updates, and hardware-based security mechanisms such as trusted platform modules (TPMs). These measures strengthen BMS resilience by preventing unauthorized access and ensuring data integrity. Our findings are essential for mitigating risks in various sectors, including electric vehicles (EVs), renewable energy, and grid storage. They underscore the importance of ongoing research and development of adaptive security strategies to safeguard BMS against evolving cyber threats. Additionally, we propose a trust mechanism that secures the connection between input sensors and the BMS, ensuring the reliability and safety of battery-powered systems across various industries.more » « less
-
null (Ed.)With the development of the emerging Connected Vehicle (CV) technology, vehicles can wirelessly communicate with traffic infrastructure and other vehicles to exchange safety and mobility information in real time. However, the integrated communication capability inevitably increases the attack surface of vehicles, which can be exploited to cause safety hazard on the road. Thus, it is highly desirable to systematically understand design-level flaws in the current CV network stack as well as in CV applications, and the corresponding security/safety consequences so that these flaws can be proactively discovered and addressed before large-scale deployment. In this paper, we design CVAnalyzer, a system for discovering design-level flaws for availability violations of the CV network stack, as well as quantifying the corresponding security/safety consequences. To achieve this, CVAnalyzer combines the attack discovery capability of a general model checker and the quantitative threat assessment capability of a probabilistic model checker. Using CVAnalyzer, we successfully uncovered 4 new DoS (Denial-of-Service) vulnerabilities of the latest CV network protocols and 14 new DoS vulnerabilities of two CV platoon management protocols. Our quantification results show that these attacks can have as high as 99% success rates, and in the worst case can at least double the delay in packet processing, violating the latency requirement in CV communication.We implemented and validated all attacks in a real-world testbed, and also analyzed the fundamental causes to propose potential solutions. We have reported our findings in the CV network protocols to the IEEE 1609 Working Group, and the group has acknowledged the discovered vulnerabilities and plans to adopt our solutions.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1145/3240765.3243496
