An official website of the United States government
Many materials of everyday use are fibrous and their strength is important in most applications. In this work we study the dependence of the strength of random fiber networks on structural parameters such as the network density, cross-link density, fiber tortuosity, and the strength of the inter-fiber cross-links. Athermal networks of cellular and fibrous type are considered. We conclude that the network strength scales linearly with the cross-link number density and with the cross-link strength for a broad range of network parameters, and for both types of networks considered. Network strength is independent of fiber material properties and of fiber tortuosity. This information can be used to design fiber networks for specified strength and, generally, to understand the mechanical behavior of fibrous materials.
more »
« less
Random Fiber Networks With Superior Properties Through Network Topology Control
In this work, we study the effect of network architecture on the nonlinear elastic behavior and strength of athermal random fiber networks of cellular type. We introduce a topology modification of Poisson–Voronoi (PV) networks with convex cells, leading to networks with stochastic nonconvex cells. Geometric measures are developed to characterize this new class of nonconvex Voronoi (NCV) networks. These are softer than the reference PV networks at the same nominal network parameters such as density, cross-link density, fiber diameter, and connectivity number. Their response is linear elastic over a broad range of strains, unlike PV networks that exhibit a gradual increase of the tangent stiffness starting from small strains. NCV networks exhibit much smaller Poisson contraction than any network of same nominal parameters. Interestingly, the strength of NCV networks increases continuously with an increasing degree of nonconvexity of the cells. These exceptional properties render this class of networks of interest in a variety of applications, such as tissue scaffolds, nonwovens, and protective clothing.
more »
« less
- Award ID(s):
- 1634328
- PAR ID:
- 10105795
- Date Published:
- Journal Name:
- Journal of applied mechanics
- Volume:
- 86
- ISSN:
- 1528-9036
- Page Range / eLocation ID:
- 081010
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
In this paper, we consider an underlay radar-massive MIMO spectrum sharing scenario in which massive MIMO base stations (BSs) with elevation beamforming capabilities are allowed to operate outside a circular exclusion zone centered at the radar. Modeling the locations of the massive MIMO BSs as a homogeneous Poisson point process (PPP), we derive an analytical expression for a tight upper bound on the average interference at the radar due to cellular transmissions. The challenge lies in bounding the worst-case elevation angle for each massive MIMO BS, for which we devise a novel construction based on the circumradius distribution of a typical Poisson-Voronoi (PV) cell. While these worst-case elevation angles are correlated for neighboring BSs due to the structure of the PV tessellation, it does not explicitly appear in our analysis because of our focus on the average interference.We also provide an estimate of the nominal average interference by approximating each cell as a circle with area equal to the average area of the typical cell. Using these results, we demonstrate that the gap between the two results remains approximately constant with respect to the exclusion zone radius. Our analysis reveals useful trends in average interference power, as a function of key deployment parameters such as radar/BS antenna heights, number of antenna elements per radar/BS, BS density, and exclusion zone radius.more » « less
-
We study the effect of inter-fiber adhesion on the mechanical behavior of cross-linked ran- dom fiber networks in two dimensions. To this end, we consider networks with connectiv- ity number, z , below, at, and above the isostaticity limit of the structure without adhesion, z c . Fibers store energy in the axial and bending deformation mode and the cross-links are of freely rotating type. Adhesive forces lead to fiber bundling and to a reduction of the total volume of the network. The degree of shrinkage is determined as a function of the strength of adhesion and network parameters. The mechanical response of these struc- tures is further studied in uniaxial tension and compression. The stress-strain curves of networks without inter-fiber adhesion exhibit an initial linear regime, followed by strain stiffening in tension and strain softening and strain localization in compression. In pres- ence of adhesion, the response becomes more complex. The initial linear regime persists, with the effective modulus decreasing and increasing with increasing adhesion in cases with z > z c and z < z c , respectively. The strain range of the linear regime increases signif- icantly with increasing adhesion. Networks with z > z c subjected to tension strain-stiffen at rates that depend on the adhesion strength, but eventually enter a large strain/stress regime in which the response is independent of this parameter. Networks with z < z c are stabilized by adhesion in the unloaded state. Beyond the initial linear regime their tangent modulus gradually decreases, only to increase again at large strains. Adhesive interactions lead to similar effects in compression. Specifically, in the z > z c case, increasing the adhe- sion strength reduces the linear elastic modulus and significantly increases the range of the linear regime, delaying strain localization. This first investigation of the mechanics of cross-linked random networks with inter-fiber adhesion opens the door to the design of soft materials with novel properties.more » « less
-
We present a study of the mechanical behavior of planar fibrous mats stabilized by inter-fiber adhesion. Fibers of various degrees of tortuosity and of infinite and finite length are considered in separate models. Fibers are randomly distributed, are not cross-linked, and interact through adhesion and friction. The variation of structural parameters such as the mat thickness and the mean segment length between contacts along given fibers with the strength of adhesion is determined. These systems are largely dissipative in that most of the work performed during deformation is dissipated frictionally and only a small fraction is stored as strain energy. The response of the mats to tensile loading has three regimes: a short elastic regime in which no sliding at contacts is observed, a well-defined sliding regime characterized by strain hardening, and a rapid stiffening regime at larger strains. The third regime is due to the formation of stress paths after the fiber tortuosity is pulled out and is absent in mats of finite length fibers. Networks of finite length fibers lose stability during the second regime of deformation. The scaling of the yield stress, which characterizes the transition between the first and the second regimes, and of the second regime's strain hardening modulus, with system parameters such as the strength of adhesion and friction and the degree of fiber tortuosity are determined. The strength of mats of finite length fibers is also determined as a function of network parameters. These results are expected to become useful in the design of electrospun mats and other planar fibrous non-cross-linked networks.more » « less
-
Adhesion plays an important role in the mechanics of nanoscale fibers such as various biological filaments, carbon nanotubes and artificial polymeric nanofibers. In this work we study assemblies of non-crosslinked filaments and characterize their adhesion-driven structural evolution and their final stable structure. The key parameters of the problem are the network density, the fiber length, the bending stiffness of fibers and the strength of adhesion. The system of fibers self-organizes in one of three types of structures: locked networks, in which fibers remain in the as-deposited state, cellular networks, in which fibers form bundles and these organize into a larger scale network, and disintegrated networks, in which the network of bundles becomes disconnected. We determine the parametric space corresponding to each of these structures. Further, we identify a triangular structure of bundles, similar to the Plateau triangle occurring in foams, which stabilizes the network of bundles and study in detail the stabilization mechanism. The analysis provides design guidelines and a physical picture of the stability and structure of random fiber networks with adhesion.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/DOI: 10.1115/1.4043828
