skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Phthalocyanines as a π–π Adsorption Strategy to Immobilize Catalyst on Carbon for Electrochemical Synthesis
In most electrochemical syntheses, reactions are happening at or near the electrode surface. For catalyzed reactions, ideally, the electrode surface would solely contain the catalyst, which then simplifies purification and lowers the amount of catalyst needed. Here, a new strategy involving phthalocyanines (Pc) to immobilize catalysts onto carbon electrode surfaces is presented. The large π structure of the Pc enables adsorption to the sp2-structure of graphitic carbon. TEMPO-modified Pc were chosen as a proof of concept to test the new immobilization strategy. It was found that the TEMPO-Pc derivatives functioned similarly or better than the widely used pyrene adsorption method. Interestingly, the new TEMPO-Pc catalyst appears to facilitate a cascade reaction involving both the anode and the cathode. The first step is the generation of an aryl aldehyde (anode) followed by the reduction of the aryl aldehyde in a pinacol-type coupling reaction at the cathode. The last step is the oxidation of a hydrobenzoin to create benzil. This work demonstrates the unique ability of electrochemistry and bifunctional catalysts to enable multistep chemical transformations, performing both reductive and oxidative transformations in one pot.  more » « less
Award ID(s):
1740656
PAR ID:
10108735
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Synlett
Volume:
30
Issue:
10
ISSN:
0936-5214
Page Range / eLocation ID:
1187 to 1193
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Nanoscale)
    null (Ed.)
    Palladium catalyzed cross-coupling reactions represent a significant advancement in contemporary organic synthesis as these reactions are of strategic importance in the area of pharmaceutical drug discovery and development. Supported palladium-based catalysts are highly sought-after in carbon–carbon bond forming catalytic processes to ensure catalyst recovery and reuse while preventing product contamination. This paper reports the development of heterogeneous Pd-based bimetallic catalysts supported on fumed silica that have high activity and selectivity matching those of homogeneous catalysts, eliminating the catalyst's leaching and sintering and allowing efficient recycling of the catalysts. Palladium and base metal (Cu, Ni or Co) contents of less than 1.0 wt% loading are deposited on a mesoporous fumed silica support (surface area SA BET = 350 m 2 g −1 ) using strong electrostatic adsorption (SEA) yielding homogeneously alloyed nanoparticles with an average size of 1.3 nm. All bimetallic catalysts were found to be highly active toward Suzuki cross-coupling (SCC) reactions with superior activity and stability for the CuPd/SiO 2 catalyst. A low CuPd/SiO 2 loading (Pd: 0.3 mol%) completes the conversion of bromobenzene and phenylboronic acid to biphenyl in 30 minutes under ambient conditions in water/ethanol solvent. In contrast, monometallic Pd/SiO 2 (Pd: 0.3 mol%) completes the same reaction in three hours under the same conditions. The combination of Pd with the base metals helps in retaining the Pd 0 status by charge donation from the base metals to Pd, thus lowering the activation energy of the aryl halide oxidative addition step. Along with its exceptional activity, CuPd/SiO 2 exhibits excellent recycling performance with a turnover frequency (TOF) of 280 000 h −1 under microwave reaction conditions at 60 °C. Our study demonstrates that SEA is an excellent synthetic strategy for depositing ultra-small Pd-based bimetallic nanoparticles on porous silica for SCC. This avenue not only provides highly active and sintering-resistant catalysts but also significantly lowers Pd contents in the catalysts without compromising catalytic activity, making the catalysts very practical for large-scale applications. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Energy & Environmental Science)
    Proton-exchange membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs) are promising power sources from portable electronic devices to vehicles. The high-cost issue of these low-temperature fuel cells can be primarily addressed by using platinum-group metal (PGM)-free oxygen reduction reaction (ORR) catalysts, in particular atomically dispersed metal–nitrogen–carbon (M–N–C, M = Fe, Co, Mn). Furthermore, a significant advantage of M–N–C catalysts is their superior methanol tolerance over Pt, which can mitigate the methanol cross-over effect and offer great potential of using a higher concentration of methanol in DMFCs. Here, we investigated the ORR catalytic properties of M–N–C catalysts in methanol-containing acidic electrolytes via experiments and density functional theory (DFT) calculations. FeN 4 sites demonstrated the highest methanol tolerance ability when compared to metal-free pyridinic N, CoN 4 , and MnN 4 active sites. The methanol adsorption on MN 4 sites is even strengthened when electrode potentials are applied during the ORR. The negative influence of methanol adsorption becomes significant for methanol concentrations higher than 2.0 M. However, the methanol adsorption does not affect the 4e − ORR pathway or chemically destroy the FeN 4 sites. The understanding of the methanol-induced ORR activity loss guides the design of promising M–N–C cathode catalyst in DMFCs. Accordingly, we developed a dual-metal site Fe/Co–N–C catalyst through a combined chemical-doping and adsorption strategy. Instead of generating a possible synergistic effect, the introduced Co atoms in the first doping step act as “scissors” for Zn removal in metal–organic frameworks (MOFs), which is crucial for modifying the porosity of the catalyst and providing more defects for stabilizing the active FeN 4 sites generated in the second adsorption step. The Fe/Co–N–C catalyst significantly improved the ORR catalytic activity and delivered remarkably enhanced peak power densities ( i.e. , 502 and 135 mW cm −2 ) under H 2 –air and methanol–air conditions, respectively, representing the best performance for both types of fuel cells. Notably, the fundamental understanding of methanol tolerance, along with the encouraging DMFC performance, will open an avenue for the potential application of atomically dispersed M–N–C catalysts in other direct alcohol or ammonia fuel cells. 
    more » « less
  3. ; ; ; (, ECS Meeting Abstracts)
    null (Ed.)
    Paired electrolysis has been emerged as an electricity-powered platform for converting biorewable feedstock to higher-valued chemicals at both the cathode and anode. In this presentation, we explored paired electrolyzers of different architectures with remarkable performance and stability. We first designed three-electrode flow electrolyzers to pair electrocatalytic hydrogenation of 5-(hydroxymethyl)furfural (HMF) on oxide-derived silver electrode and TEMPO-mediated HMF oxidation on carbon cloth. The paired flow cell achieved a combined faradaic efficiency of 163% to desired 2,5-bis(hydroxymethyl)furan (BHMF) and 2,5-furandicarboxylic acid (FDCA) with a cell potential of ~1.7 V, at the constant current of 10 mA. When the anodic reaction was replaced by hydrogen oxidation, a minimized cell voltage of only ~0.9 V was achieved. We then assmbled a membrane electrode assembly (MEA)-based two-electrode flow cell, which realized a minimized cell potential of only ~1.5 V for a continuous 24 hours paired electrolysis of HMF. Finally, a pH asymmetric architecture was designed to match the optimum reaction conditions and to replace HMF oxidation on a NiFeOOH anode catalyst without a redox mediator. Our recent development of electrochemical-chemical combined reactors for furanic compounds conversion will also be briefly presented. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Nature Communications)
    Abstract Direct ethanol fuel cells have been widely investigated as nontoxic and low-corrosive energy conversion devices with high energy and power densities. It is still challenging to develop high-activity and durable catalysts for a complete ethanol oxidation reaction on the anode and accelerated oxygen reduction reaction on the cathode. The materials’ physics and chemistry at the catalytic interface play a vital role in determining the overall performance of the catalysts. Herein, we propose a Pd/Co@N-C catalyst that can be used as a model system to study the synergism and engineering at the solid-solid interface. Particularly, the transformation of amorphous carbon to highly graphitic carbon promoted by cobalt nanoparticles helps achieve the spatial confinement effect, which prevents structural degradation of the catalysts. The strong catalyst-support and electronic effects at the interface between palladium and Co@N-C endow the electron-deficient state of palladium, which enhances the electron transfer and improved activity/durability. The Pd/Co@N-C delivers a maximum power density of 438 mW cm −2 in direct ethanol fuel cells and can be operated stably for more than 1000 hours. This work presents a strategy for the ingenious catalyst structural design that will promote the development of fuel cells and other sustainable energy-related technologies. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Journal of Materials Chemistry A)
    Atomically dispersed metal catalysts have demonstrated superb electrocatalytic activity because of optimal atom efficiency. However, a rational design of low-cost, high-performance single atom catalysts remains a great challenge due to the elusive chemical reactions of the formation of metal active sites. In this work, biomass hydrogel is prepared as a template for mass production of three-dimensional carbon aerogel-supported single metal atom catalysts. By tailoring the structure of the hydrogel templates, the obtained carbon aerogels exhibit an increase of microporous defects which capture and stabilize isolated metal atoms and minimize aggregation during pyrolysis. Extended X-ray absorption fine structure, Mössbauer spectroscopy, and nitrogen adsorption–desorption isotherm measurements indicate that single metal centers of FeN 4 are formed and embedded within the hierarchical porous carbon frameworks. The obtained composites exhibit outstanding catalytic activity towards oxygen reduction in alkaline media, with a high onset potential of +1.05 V and half-wave potential of +0.88 V, as well as excellent durability. Remarkably, when the carbon aerogels are used as the cathode catalyst in an aluminum–air battery, the battery achieves an ultrahigh open-circuit voltage of 1.81 V, large power density of 181.1 mW cm −2 and stable discharge voltage of 1.70 V at 20 mA cm −2 , markedly better than those with commercial Pt/C as the cathode catalyst. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email