skip to main content


Title: RENEW: Programmable and Observable Massive MIMO Networks
Massive MIMO is one of the key technologies in 5G wireless broadband, capable of delivering substantial improvements in capacity of next-generation wireless networks. However, due to its inherent complexity, its operation, reconfiguration, and enhancement present significant challenges and risks. In this paper we present RENEW, a fully programmable and observable massive MIMO network. We present the architectural design for full programmability at every layer of the wireless stack, from the radio hardware, including PHY and MAC layer configurations, all the way up to the network core functionality using network function virtualization. We also present mechanisms to enable observability at every layer of the stack. These include various indicators in the radio and core access network, hence enabling effective monitoring, troubleshooting, and performance evaluation of the network at large.  more » « less
Award ID(s):
1717218
NSF-PAR ID:
10119340
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Date Published:
Journal Name:
2018 IEEE 52nd Asilomar Conference on Signals, Systems, and Computers
Page Range / eLocation ID:
1654 to 1658
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. The rapidly increasing interest from various verticals for the upcoming 5th generation (5G) networks expect the network to support higher data rates and have an improved quality of service. This demand has been met so far by employing sophisticated transmission techniques including massive Multiple Input Multiple Output (MIMO), millimeter wave (mmWave) bands as well as bringing the computational power closer to the users via advanced baseband processing units at the base stations. Future evolution of the networks has also been assumed to open many new business horizons for the operators and the need of not only a resource efficient but also an energy efficient ecosystem has greatly been felt. The deployment of small cells has been envisioned as a promising answer for handling the massive heterogeneous traffic, but the adverse economic and environmental impacts cannot be neglected. Given that 10% of the world’s energy consumption is due to the Information and Communications Technology (ICT) industry, energy-efficiency has thus become one of the key performance indicators (KPI). Various avenues of optimization, game theory and machine learning have been investigated for enhancing power allocation for downlink and uplink channels, as well as other energy consumption/saving approaches. This paper surveys the recent works that address energy efficiency of the radio access as well as the core of wireless networks, and outlines related challenges and open issues. 
    more » « less
  2. null (Ed.)
    Overcoming the conventional trade-off between throughput and bit error rate (BER) performance, versus computational complexity is a long-term challenge for uplink Multiple-Input Multiple-Output (MIMO) detection in base station design for the cellular 5G New Radio roadmap, as well as in next generation wireless local area networks. In this work, we present ParaMax, a MIMO detector architecture that for the first time brings to bear physics-inspired parallel tempering algorithmic techniques [28, 50, 67] on this class of problems. ParaMax can achieve near optimal maximum-likelihood (ML) throughput performance in the Large MIMO regime, Massive MIMO systems where the base station has additional RF chains, to approach the number of base station antennas, in order to support even more parallel spatial streams. ParaMax is able to achieve a near ML-BER performance up to 160 × 160 and 80 × 80 Large MIMO for low-order modulations such as BPSK and QPSK, respectively, only requiring less than tens of processing elements. With respect to Massive MIMO systems, in 12 × 24 MIMO with 16-QAM at SNR 16 dB, ParaMax achieves 330 Mbits/s near-optimal system throughput with 4--8 processing elements per subcarrier, which is approximately 1.4× throughput than linear detector-based Massive MIMO systems. 
    more » « less
  3. Full-duplex (FD) wireless communication refers to a communication system in which both ends of a wireless link transmit and receive data simultaneously and on the same frequency band. One of the major challenges of FD communication is self-interference (SI), which refers to the interference caused by transmitting elements of a radio to its own receiving elements. Fully digital beamforming is a technique used to conduct beamforming and has been recently repurposed to also reduce SI. However, the cost of fully digital systems (e.g., base stations) dramatically increases with the increase in the number of antennas as these systems use a separate Tx-Rx RF chain for each antenna element. Hybrid beamforming systems use a much smaller number of RF chains to feed the same number of antennas, and hence can significantly reduce the deployment cost. In this paper, we aim to quantify the performance gap between these two radio architectures in terms of SI cancellation and system capacity in FD multi-user MIMO setups. We first obtained over-the-air channel measurement data on two outdoor massive MIMO deployments over the course of three months. We next study two state-of-the-art transmit beamforming based FD systems for fully digital and hybrid architectures. We show that the hybrid beamforming system can achieve 80-97% of the fully digital system capacity, depending on the number of clients. 
    more » « less
  4. User demand for increasing amounts of wireless capacity continues to outpace supply, and so to meet this demand, significant progress has been made in new MIMO wireless physical layer techniques. Higher-performance systems now remain impractical largely only because their algorithms are extremely computationally demanding. For optimal performance, an amount of computation that increases at an exponential rate both with the number of users and with the data rate of each user is often required. The base station's computational capacity is thus becoming one of the key limiting factors on wireless capacity. QuAMax is the first large MIMO cloud-based radio access network design to address this issue by leveraging quantum annealing on the problem. We have implemented QuAMax on the 2,031 qubit D-Wave 2000Q quantum annealer, the state-of-the-art in the field. Our experimental results evaluate that implementation on real and synthetic MIMO channel traces, showing that 30 US of compute time on the 2000Q can enable 48 user, 48 AP antenna BPSK communication at 20 dB SNR with a bit error rate of 10^(-6) and a 1,500 byte frame error rate of 10^(-4). 
    more » « less
  5. This paper presents Virginia Tech’s wireless testbed supporting research on long-term evolution (LTE) signaling and radio frequency (RF) spectrum coexistence. LTE is continuously refined and new features released. As the communications contexts for LTE expand, new research problems arise and include operation in harsh RF signaling environments and coexistence with other radios. Our testbed provides an integrated research tool for investigating these and other research problems; it allows analyzing the severity of the problem, designing and rapidly prototyping solutions, and assessing them with standard-compliant equipment and test procedures. The modular testbed integrates general-purpose software-defined radio hardware, LTE-specific test equipment, RF components, free open-source and commercial LTE software, a configurable RF network and recorded radar waveform samples. It supports RF channel emulated and over-the-air radiated modes. The testbed can be remotely accessed and configured. An RF switching network allows for designing many different experiments that can involve a variety of real and virtual radios with support for multiple-input multiple-output (MIMO) antenna operation. We present the testbed, the research it has enabled and some valuable lessons that we learned and that may help designing, developing, and operating future wireless testbeds. 
    more » « less