Due to the flocculation process, suspended mud aggregates carried by rivers to the coastal ocean are thought to undergo changes in size and shape in response to environmental drivers such as turbulence, sediment concentration, organic matter (OM), and salinity. Some have assumed that salt is necessary for floc formation, and that mud, therefore, reaches the estuary unflocculated. Yet mud flocs exist in freshwater systems long before the estuarine zone, likely due to the presence of OM acting as a floc‐promoting binder. Therefore, it is important to consider how salinity affects flocculation, if at all, in the presence of OM. Here, we used experiments to examine the flocculation of a natural mud with and without OM. Results showed that the rate of floc growth and equilibrium size both increase with salinity regardless of the presence or absence of OM. However, the response of both to salinity was stronger when OM was present. In deionized water, natural sediment with OM was seen to produce large flocs. However, the size distribution of the suspension tended to be bimodal. With the addition of salt, increasing amounts of unflocculated material became bound within flocs, producing a more unimodal size distribution. Here, the enhancing effects of salt were noticeable at even 0.5 ppt, and increases in salinity past 3–5 ppt only marginally increased the floc growth rate and final size. Data from the experiment were used to develop a salinity‐dependent model to account for changes in floc growth rate and equilibrium size.
- Award ID(s):
- 1749489
- NSF-PAR ID:
- 10120637
- Date Published:
- Journal Name:
- Applied and Environmental Microbiology
- Volume:
- 85
- Issue:
- 10
- ISSN:
- 0099-2240
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract -
Summary Hopanoids are a class of membrane lipids found in diverse bacterial lineages, but their physiological roles are not well understood. The ethanol fermenter
Zymomonas mobilis features the highest measured concentration of hopanoids, leading to the hypothesis that these lipids can protect against the solvent toxicity. However, the lack of genetic tools for manipulating hopanoid composition in this bacterium has limited their further functional analysis. Due to the polyploidy (>50 genome copies per cell) ofZ. mobilis , we found that disruptions of essential hopanoid biosynthesis (hpn ) genes act as genetic knockdowns, reliably modulating the abundance of different hopanoid species. Using a set ofhpn transposon mutants, we demonstrate that both reduced hopanoid content and modified hopanoid polar head group composition mediate growth and survival in ethanol. In contrast, the amount of hopanoids, but not their head group composition, contributes to fitness at low pH. Spectroscopic analysis of bacterial‐derived liposomes showed that hopanoids protect against several ethanol‐driven phase transitions in membrane structure, including lipid interdigitation and bilayer dissolution. We propose that hopanoids act through a combination of hydrophobic and inter‐lipid hydrogen bonding interactions to stabilize bacterial membranes during solvent stress. -
Uijttewaal, W. ; Franca, J. ; Valero, M. ; Chavarrias, D. ; Ylla Arbós, V. ; Schielen, C. ; Crosato, A. (Ed.)Turbid rivers and density currents carry, distribute, and deposit considerable quantities of fine muddy sediment within rivers, coastal regions, and reservoirs. The muddy sediment in these flows has the potential to flocculate, and knowing and predicting the floc size is critical for predicting mud movement. Flocs are notoriously difficult to measure. Imaging of flocs either within a turbulent suspension or in a separate settling chamber are methods widely considered to be the most accurate ways to measure floc size. The benefit of imaging flocs within the suspension is that the measurements are made within the conditions that gave rise to those particular flocs. The drawback is that it is not possible to make measurements in suspensions with concentrations > 400 mg/L. Transferring a suspension sample to a settling chamber allows for imaging of flocs from suspensions with higher concentration. But, it also removes flocs from the environment in which they were formed, possibly leading to floc growth or breakup. In this study, we compare these two methods to determine whether or not the flocs imaged in a settling chamber are representative of the flocs found in a turbulent suspension. For the experiments, flocs are formed from kaolinite and montmorillonite clay mixed with saltwater at different concentrations and mixing conditions. The suspension is then imaged within the mixing tank, and samples from the mixing tank are imaged in a settling chamber. Results show that flocs imaged in the settling chamber tend to be slightly smaller than those imaged in the mixing chamber, though the differences are minimal if care is taken in the transfer process. Additional trends in the difference between the two methods with turbulent shear rate and concentration are discussed.more » « less
-
Abstract D‐Glucaric acid can be produced as a value‐added chemical from biomass through a de novo pathway in
Escherichia coli . However, previous studies have identified pH‐mediated toxicity at product concentrations of 5 g/L and have also found the eukaryotic myo‐inositol oxygenase (MIOX) enzyme to be rate‐limiting. We ported this pathway toSaccaromyces cerevisiae , which is naturally acid‐tolerant and evaluate a codon‐optimized MIOX homologue. We constructed two engineered yeast strains that were distinguished solely by theirMIOX gene – either the previous version fromMus musculus or a homologue fromArabidopsis thaliana codon‐optimized for expression inS. cerevisiae – in order to identify the rate‐limiting steps for D‐glucaric acid production both from a fermentative and non‐fermentative carbon source. myo‐Inositol availability was found to be rate‐limiting from glucose in both strains and demonstrated to be dependent on growth rate, whereas the previously usedM. musculus MIOX activity was found to be rate‐limiting from glycerol. Maximum titers were 0.56 g/L from glucose in batch mode, 0.98 g/L from glucose in fed‐batch mode, and 1.6 g/L from glucose supplemented with myo‐inositol. Future work focusing on the MIOX enzyme, the interplay between growth and production modes, and promoting aerobic respiration should further improve this pathway. -
null (Ed.)Polyelectrolyte-driven flocculation of suspended particulate in solution is an important process in a variety of industrial processes such as drinking water treatment and composite material synthesis. Flocculation depends on a wide variety of physicochemical and hydrodynamic properties, which affect floc size, growth rate, and floc morphology. Floc formation and growth behavior is explored here using two different molecular weights of a cationic polyacrylamide flocculant and anisotropic Na-bentonite clay particles under a variety of solution ionic strengths. A Taylor–Couette cell with radial injection capabilities was used to study the effects of solution ionic strength and polyelectrolyte molecular weight on floc size, growth rate, and floc morphology during the flocculation process with a constant global velocity gradient. The floc size generally decreased with increasing ionic strength whereas the floc growth rate initially increased then decreased. This likely occurred due to charge screening effects, where increased bentonite aggregate size and a less expanded polyelectrolyte conformation at higher ionic strengths results in a decreased ability for the polyelectrolyte to bridge multiple bentonite aggregates. The densification of bentonite aggregates at higher ionic strengths resulted in floc morphologies that were more resistant to shear-induced breakage. With the exceptions of optimal dose concentration and dispersion coefficients, there were no clear differences in the floc growth rate behaviors for the two molecular weights studied. This work contributes to an improved understanding of the physicochemical complexities of polyelectrolyte-driven flocculation that can inform dosing requirements for more efficient industrial operations.more » « less