More Like this

1. Neuromorphic vision and tactile fusion for upper limb prosthesis control

   https://doi.org/10.1109/NER.2019.8716890  

   Hays, Mark ; Osborn, Luke ; Ghosh, Rohan ; Iskarous, Mark ; Hunt, Christopher ; Thakor, Nitish V. ( March 2019 , IEEE Transactions on Biomedical Circuits and Systems)

   null (Ed.)

   A major issue with upper limb prostheses is the disconnect between sensory information perceived by the user and the information perceived by the prosthesis. Advances in prosthetic technology introduced tactile information for monitoring grasping activity, but visual information, a vital component in the human sensory system, is still not fully utilized as a form of feedback to the prosthesis. For able-bodied individuals, many of the decisions for grasping or manipulating an object, such as hand orientation and aperture, are made based on visual information before contact with the object. We show that inclusion of neuromorphic visual information, combined with tactile feedback, improves the ability and efficiency of both able-bodied and amputee subjects to pick up and manipulate everyday objects.We discovered that combining both visual and tactile information in a real-time closed loop feedback strategy generally decreased the completion time of a task involving picking up and manipulating objects compared to using a single modality for feedback. While the full benefit of the combined feedback was partially obscured by experimental inaccuracies of the visual classification system, we demonstrate that this fusion of neuromorphic signals from visual and tactile sensors can provide valuable feedback to a prosthetic arm for enhancing real-time function and usability. 

   more » « less
2. First Demonstration of Functional Task Performance Using a Sonomyographic Prosthesis: A Case Study

   https://doi.org/10.3389/fbioe.2022.876836  

   Engdahl, Susannah M. ; Acuña, Samuel A. ; King, Erica L. ; Bashatah, Ahmed ; Sikdar, Siddhartha ( May 2022 , Frontiers in Bioengineering and Biotechnology)

   Ultrasound-based sensing of muscle deformation, known as sonomyography, has shown promise for accurately classifying the intended hand grasps of individuals with upper limb loss in offline settings. Building upon this previous work, we present the first demonstration of real-time prosthetic hand control using sonomyography to perform functional tasks. An individual with congenital bilateral limb absence was fitted with sockets containing a low-profile ultrasound transducer placed over forearm muscle tissue in the residual limbs. A classifier was trained using linear discriminant analysis to recognize ultrasound images of muscle contractions for three discrete hand configurations (rest, tripod grasp, index finger point) under a variety of arm positions designed to cover the reachable workspace. A prosthetic hand mounted to the socket was then controlled using this classifier. Using this real-time sonomyographic control, the participant was able to complete three functional tasks that required selecting different hand grasps in order to grasp and move one-inch wooden blocks over a broad range of arm positions. Additionally, these tests were successfully repeated without retraining the classifier across 3 hours of prosthesis use and following simulated donning and doffing of the socket. This study supports the feasibility of using sonomyography to control upper limb prostheses in real-world applications. 

   more » « less
3. Texture Discrimination with a Soft Biomimetic Finger Using a Flexible Neuromorphic Tactile Sensor Array That Provides Sensory Feedback

   https://doi.org/10.1089/soro.2020.0016  

   Sankar, Sriramana ; Balamurugan, Darshini ; Brown, Alisa ; Ding, Keqin ; Xu, Xingyuan ; Low, Jin Huat ; Yeow, Chen Hua ; Thakor, Nitish ( September 2020 , Soft Robotics)

   null (Ed.)

   The compliant nature of soft fingers allows for safe and dexterous manipulation of objects by humans in an unstructured environment. A soft prosthetic finger design with tactile sensing capabilities for texture discrimination and subsequent sensory stimulation has the potential to create a more natural experience for an amputee. In this work, a pneumatically actuated soft biomimetic finger is integrated with a textile neuromorphic tactile sensor array for a texture discrimination task. The tactile sensor outputs were converted into neuromorphic spike trains, which emulate the firing pattern of biological mechanoreceptors. Spike-based features from each taxel compressed the information and were then used as inputs for the support vector machine classifier to differentiate the textures. Our soft biomimetic finger with neuromorphic encoding was able to achieve an average overall classification accuracy of 99.57% over 16 independent parameters when tested on 13 standardized textured surfaces. The 16 parameters were the combination of 4 angles of flexion of the soft finger and 4 speeds of palpation. To aid in the perception of more natural objects and their manipulation, subjects were provided with transcutaneous electrical nerve stimulation to convey a subset of four textures with varied textural information. Three able-bodied subjects successfully distinguished two or three textures with the applied stimuli. This work paves the way for a more human-like prosthesis through a soft biomimetic finger with texture discrimination capabilities using neuromorphic techniques that provide sensory feedback; furthermore, texture feedback has the potential to enhance user experience when interacting with their surroundings. 

   more » « less
4. Joint Speed Discrimination and Augmentation For Prosthesis Feedback

   https://doi.org/10.1038/s41598-018-36126-4  

   Earley, Eric J. ; Johnson, Reva E. ; Hargrove, Levi J. ; Sensinger, Jon W. ( December 2018 , Scientific Reports)

   Sensory feedback is critical in fine motor control, learning, and adaptation. However, robotic prosthetic limbs currently lack the feedback segment of the communication loop between user and device. Sensory substitution feedback can close this gap, but sometimes this improvement only persists when users cannot see their prosthesis, suggesting the provided feedback is redundant with vision. Thus, given the choice, users rely on vision over artificial feedback. To effectively augment vision, sensory feedback must provide information that vision cannot provide or provides poorly. Although vision is known to be less precise at estimating speed than position, no work has compared speed precision of biomimetic arm movements. In this study, we investigated the uncertainty of visual speed estimates as defined by different virtual arm movements. We found that uncertainty was greatest for visual estimates of joint speeds, compared to absolute rotational or linear endpoint speeds. Furthermore, this uncertainty increased when the joint reference frame speed varied over time, potentially caused by an overestimation of joint speed. Finally, we demonstrate a joint-based sensory substitution feedback paradigm capable of significantly reducing joint speed uncertainty when paired with vision. Ultimately, this work may lead to improved prosthesis control and capacity for motor learning.

    

   more » « less
5. Synthetic Muscle Electroactive Polymer (EAP) pressure sensing and controlled shape-morphing for robotic grippers

   https://doi.org/10.1117/12.2583295  

   Briggs, Calum ; Cheng, Tianyu ; Meredith, Margot ; Vicars, Peter N. ; Rasmussen, Lenore ; Zhong, Alexander ( March 2021 , Proc. SPIE 11587, Electroactive Polymer Actuators and Devices (EAPAD) XXIII,)

   Madden, John D. ; Anderson, Iain A. ; Shea, Herbert R. (Ed.)

   Ras Labs makes Synthetic Muscle™, which is a class of electroactive polymer (EAP) based materials and actuators that sense pressure (gentle touch to high impact), controllably contract and expand at low voltage (1.5 V to 50 V, including use of batteries), and attenuate force. We are in the robotics era, but robots do have their challenges. Currently, robotic sensing is mainly visual, which is useful up until the point of contact. To understand how an object is being gripped, tactile feedback is needed. For handling fragile objects, if the grip is too tight, breakage occurs, and if the grip is too loose, the object will slip out of the grasp, also leading to breakage. Rigid robotic grippers using a visual feedback loop can struggle to determine the exact point and quality of contact. Robotic grippers can also get a stuttering effect in the visual feedback loop. By using soft Synthetic Muscle™ based EAP pads as the sensors, immediate feedback was generated at the first point of contact. Because these pads provided a soft, compliant interface, the first point of contact did not apply excessive force, allowing the force applied to the object to be controlled. The EAP sensor could also detect a change in pressure location on its surface, making it possible to detect and prevent slippage by then adjusting the grip strength. In other words, directional glide provided feedback for the presence of possible slippage to then be able to control a slightly tighter grip, without stutter, due to both the feedback and the soft gentleness of the fingertip-like EAP pads themselves. The soft nature of the EAP fingertip pad also naturally held the gripped object, improving the gripping quality over rigid grippers without an increase in applied force. Analogous to finger-like tactile touch, the EAPs with appropriate coatings and electronics were positioned as pressure sensors in the fingertip or end effector regions of robotic grippers. This development of using Synthetic Muscle™ based EAPs as soft sensors provided for sensors that feel like the pads of human fingertips. Basic pressure position and magnitude tests have been successful, with pressure sensitivity down to 0.05 N. Most automation and robots are very strong, very fast, and usually need to be partitioned away from humans for safety reasons. For many repetitive tasks that humans do with delicate or fragile objects, it would be beneficial to use robotics; whether it is for agriculture, medical surgery, therapeutic or personal care, or in extreme environments where humans cannot enter, including with contagions that have no cure. Synthetic Muscle™ was also retrofitted as actuator systems into off-the-shelf robotic grippers and is being considered in novel biomimetic gripper designs, operating at low voltages (less than 50 V). This offers biomimetic movement by contracting like human muscles, but also exceeds natural biological capabilities by expanding under reversed electric polarity. Human grasp is gentle yet firm, with tactile touch feedback. In conjunction with shape-morphing abilities, these EAPs also are being explored to intrinsically sense pressure due to the correlation between mechanical force applied to the EAP and its electronic signature. The robotic field is experiencing phenomenal growth in this fourth phase of the industrial revolution, the robotics era. The combination of Ras Labs’ EAP shape-morphing and sensing features promises the potential for robotic grippers with human hand-like control and tactile sensing. This work is expected to advance both robotics and prosthetics, particularly for collaborative robotics to allow humans and robots to intuitively work safely and effectively together. 

   more » « less