An official website of the United States government
Coupled-mode theory for plasmonic resonators integrated with silicon waveguides towards mid-infrared spectroscopic sensing
Advances in mid-IR lasers, detectors, and nanofabrication technology have enabled new device architectures to implement on-chip sensing applications. In particular, direct integration of plasmonic resonators with a dielectric waveguide can generate an ultra-compact device architecture for biochemical sensing via surface-enhanced infrared absorption (SEIRA) spectroscopy. A theoretical investigation of such a hybrid architecture is imperative for its optimization. In this work, we investigate the coupling mechanism between a plasmonic resonator array and a waveguide using temporal coupled-mode theory and numerical simulation. The results conclude that the waveguide transmission extinction ratio reaches maxima when the resonator-waveguide coupling rate is maximal. Moreover, after introducing a model analyte in the form of an oscillator coupled with the plasmonics-waveguide system, the transmission curve with analyte absorption can be fitted successfully. We conclude that the extracted sensing signal can be maximized when analyte absorption frequency is the same as the transmission minima, which is different from the plasmonic resonance frequency. This conclusion is in contrast to the dielectric resonator scenario and provides an important guideline for design optimization and sensitivity improvement of future devices.
more »
« less
- PAR ID:
- 10131005
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optics Express
- Volume:
- 28
- Issue:
- 2
- ISSN:
- 1094-4087; OPEXFF
- Format(s):
- Medium: X Size: Article No. 2020
- Size(s):
- Article No. 2020
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract Engineering light-matter interactions using non-Hermiticity, particularly through spectral degeneracies known as exceptional points (EPs), is an emerging field with potential applications in areas such as cavity quantum electrodynamics, spectral filtering, sensing, and thermal imaging. However, tuning and stabilizing a system to a discrete EP in parameter space is a challenging task. Here, we circumvent this challenge by operating a waveguide-coupled resonator on a surface of EPs, known as an exceptional surface (ES). We achieve this by terminating only one end of the waveguide with a tuneable symmetric reflector to induce a nonreciprocal coupling between the frequency-degenerate clockwise and counterclockwise resonator modes. By operating the system at critical coupling on the ES, we demonstrate chiral and degenerate perfect absorption with squared-Lorentzian lineshape. We expect our approach to be useful for studying quantum processes at EPs and to serve as a bridge between non-Hermitian physics and other fields that rely on radiation engineering.more » « less
-
Antenna coupled detectors break the intrinsic tradeoff between signal and noise by “collecting over a large area” and “detecting over a small area”. Most antenna coupled detectors in the infrared rely on a metal resonator structure. However, there are losses associated with metallic structures. We have demonstrated a novel long-wave infrared (LWIR) detector that combines a dielectric resonator antenna with an antimonide-based absorber. The detector consists of a 3D, subwavelength InAsSb absorber embedded in a resonant, cylindrical dielectric resonator antenna made of amorphous silicon. This architecture enables the antimonide detection element to shrink to deep subwavelength dimensions, thereby reducing its thermal noise. It is important to note that this concept only applies when (a) the detector noise is limited by bulk noise mechanisms with negligible surface leakage currents and (b) the dominant source of current in the device is due to dark current (such as diffusion) that scales with the volume of the detector. The dielectric resonator enhances the collection of photons with its resonant structure that couples incident radiation to the detector. We will present results on the absorption in structures with and without the dielectric resonator antenna. The signal to noise enhancement in the LWIR photodiodes integrated with the dielectric resonator antenna using radiometric characterization will be discussed.more » « less
-
The requirements of augmented signal contrast provided by nanoparticle tags in biosensor microscopy-based point-of-care technologies for cancer and infectious disease diagnostics can be addressed through metallo-dielectric nanoarchitectures that enhance optical scattering and absorption to provide digital resolution detection of single tags with simple instrumentation. Photonic Resonator Interferometric Scattering Microscopy (PRISM) enables label-free visualization of nanometer-scale analytes such as extracellular vesicles and virions, and its applicability can be extended to biomolecular analyte counting through nanoparticle tags. Here, we present template-free, linker-less cryosoret nano-assemblies fabricated via adiabatic cooling (−196 °C) as plasmonic nano-antennas that provide high scattering contrast in PRISM. Plasmonic Ag and Au nanomaterials and their cryosorets are evaluated through imaging experiments and simulations based on the finite element method to understand the photo-plasmonic coupling effect at the surface of a photonic crystal (PC) interface. The Ag and Au cryosorets provide at most 8.29-fold and 6.77-fold higher signal contrast compared to their singlet counterpart. Through the simulations, the averaged field magnitude enhancements of 2.77-fold and 3.68-fold are observed for Ag and Au cryosorets when interfacing with PCs compared to bare glass substrates. The hybrid coupling between the localized Mie and delocalized Bragg plasmons of cryosorets and the underlying PC's guided mode resonance provides insights for developing nano-assembly-based nano-tags for biosensing applications.more » « less
-
Sanders, Glen A.; Lieberman, Robert A.; Udd Scheel, Ingrid (Ed.)Evanescent wave sensors in photonic integrated circuits have been demonstrated for gas sensing applications. While some methods rely on the distinctive response of certain polymers for sensing specific gases, absorption spectroscopy identifies any gas uniquely from their unique vibration signatures. Based on the Beer-Lambert principle, the sensitivity of absorption by a gas on chip relies on the length of the sensing region, the optical overlap integral with the analyte gas and the absorption cross-section at the wavelength with the fundamental vibration signature. The overlap of the optical mode with the analyte has been enhanced in photonic devices by combining slot waveguide confinements with photonic crystal slow light effects. While the absorption cross-section is a property of the gas, the length of the sensing region is limited by the available area on a chip and waveguide propagation losses that limit the minimum signal to noise ratio. In this paper, we show that by incorporating reflecting loop mirrors, the absorption path length can be doubled for the same geometric length of the absorption sensing waveguide. Light from a waveguide is split into two paths, each with a slow light photonic crystal waveguide, by a 2×2 multimode interference (MMI) power splitter. Each path is terminated by a loop mirror that causes the light to retrace its path back down the sensing arms thereby doubling the optical path length over which light interacts with the analyte. Results on the enhancement of phase sensitivity and absorbance sensitivity in the interferometric configuration are presentedmore » « less
