skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Far-field midinfrared superresolution imaging and spectroscopy of single high aspect ratio gold nanowires
Limited approaches exist for imaging and recording spectra of individual nanostructures in the midinfrared region. Here we use infrared photothermal heterodyne imaging (IR-PHI) to interrogate single, high aspect ratio Au nanowires (NWs). Spectra recorded between 2,800 and 4,000 cm−1for 2.5–3.9-μm-long NWs reveal a series of resonances due to the Fabry–Pérot modes of the NWs. Crucially, IR-PHI images show structure that reflects the spatial distribution of the NW absorption, and allow the resonances to be assigned to them= 3 andm= 4 Fabry–Pérot modes. This far-field optical measurement has been used to image the mode structure of plasmon resonances in metal nanostructures, and is made possible by the superresolution capabilities of IR-PHI. The linewidths in the NW spectra range from 35 to 75 meV and, in several cases, are significantly below the limiting values predicted by the bulk Au Drude damping parameter. These linewidths imply long dephasing times, and are attributed to reduction in both radiation damping and resistive heating effects in the NWs. Compared to previous imaging studies of NW Fabry–Pérot modes using electron microscopy or near-field optical scanning techniques, IR-PHI experiments are performed under ambient conditions, enabling detailed studies of how the environment affects mid-IR plasmons.  more » « less
Award ID(s):
1902403 1502848 1727092 1664684
PAR ID:
10131480
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ;
Publisher / Repository:
Proceedings of the National Academy of Sciences
Date Published:
Journal Name:
Proceedings of the National Academy of Sciences
Volume:
117
Issue:
5
ISSN:
0027-8424
Page Range / eLocation ID:
p. 2288-2293
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract Quantum devices based on InSb nanowires (NWs) are a prime candidate system for realizing and exploring topologically-protected quantum states and for electrically-controlled spin-based qubits. The influence of disorder on achieving reliable quantum transport regimes has been studied theoretically, highlighting the importance of optimizing both growth and nanofabrication. In this work, we consider both aspects. We developed InSb NW with thin diameters, as well as a novel gating approach, involving few-layer graphene and atomic layer deposition-grown AlOx. Low-temperature electronic transport measurements of these devices reveal conductance plateaus and Fabry–Pérot interference, evidencing phase-coherent transport in the regime of few quantum modes. The approaches developed in this work could help mitigate the role of material and fabrication-induced disorder in semiconductor-based quantum devices. 
    more » « less
  2. Vibrational strong coupling of molecules to optical cavities based on plasmonic resonances has been explored recently because plasmonic near-fields can provide strong coupling in sub-diffraction limited volumes. Such field localization maximizes coupling strength, which is crucial for modifying the vibrational response of molecules and, thereby, manipulating chemical reactions. Here, we demonstrate an angle-independent plasmonic nanodisk substrate that overcomes limitations of traditional Fabry–Pérot optical cavities because the design can strongly couple with all molecules on the surface of the substrate regardless of molecular orientation. We demonstrate that the plasmonic substrate provides strong coupling with the C=O vibrational stretch of deposited films of PMMA. We also show that the large linewidths of the plasmon resonance allow for simultaneous strong coupling to two, orthogonal water symmetric and asymmetric vibrational modes in a thin film of copper sulfate monohydrate deposited on the substrate surface. A three-coupled-oscillator model is developed to analyze the coupling strength of the plasmon resonance with these two water modes. With precise control over the nanodisk diameter, the plasmon resonance is tuned systematically through the modes, with the Rabi splitting from both modes varying as a function of the plasmon frequency and with strong coupling to both modes achieved simultaneously for a range of diameters. This work may aid further studies into manipulation of the ground-state chemical landscape of molecules by perturbing multiple vibrational modes simultaneously and increasing the coupling strength in sub-diffraction limited volumes. 
    more » « less
  3. Mid-infrared (mid-IR) photodetection is important for various applications, including biomedical diagnostics, security, chemical identification, and free-spacing optical communications. However, conventional “photon” mid-IR photodetectors require liquid nitrogen cooling (i.e., MCT). Furthermore, acquiring mid-IR spectra usually involves a complex and expensive Fourier Transform Infrared spectrometer, a tabletop instrument consisting of a meter-long interferometer and MCT detectors, which is not suitable for mobile and compact device applications. In this work, we present tunable photoresponsivity in the mid-IR wavelength in palladium diselenide (PdSe2) – molybdenum disulfide (MoS2) heterostructure field-effect transistors (FETs), operating at room temperature. Furthermore, we applied a tunable membrane cavity to modulate the Fabry–Pérot resonance to modulate the absorption spectrum of the device layer. We used a robust polyetherimide (PEI) membrane with CVD-grown graphene to electrically tune the membrane structure. For the next step, we will integrate the PdSe2-based photodetector and tunable membrane to increase detection sensitivity and spectrum tunability to realize the ‘learning’-based spectroscopy. 
    more » « less
  4. Abstract In this work, we demonstrate optically pumped lasing in highly Zn-doped GaAs nanowires (NWs) lying on an iron film. The conically shaped NWs are first covered with an 8 nm thick Al2O3film to prevent atmospheric oxidation and mitigate band-bending effects. Multimode and single-mode lasing have been observed for NWs with a length greater or smaller than 2μm, respectively. Finite difference time domain calculations reveal a weak electric field enhancement in the Al2O3layer at the NW/iron film interface for the lasing modes. The high Zn acceptor concentration in the NWs provides enhanced radiative efficiency and enables lasing on the iron film despite plasmonic losses. Our results open avenues for integrating NW lasers on ferromagnetic substrates to achieve new functionalities, such as magnetic field-induced modulation. 
    more » « less
  5. We demonstrate unique reflective properties of light from bare and gold-coated InP nanowire (NW) photonic crystal arrays. The undoped wurtzite InP nanowire arrays are grown by selective area epitaxy and coated with a 12-nm thick Al2O3film to suppress atmospheric oxidation. A nominally 10-nm thick gold film is deposited around the NWs to investigate plasmonic effects. The reflectance spectra show pronounced Fabry-Perot oscillations, which are shifted for p- and s-polarized light due to a strong intrinsic birefringence in the NW arrays. Gold-coating of the NW array leads to a significant increase of the reflectance by a factor of two to three compared to the uncoated array, which is partially attributed to a plasmon resonance of the gold caps on top of the NWs and to a plasmonic antenna effect for p-polarized light. These interpretations are supported by finite-difference-time-domain simulations. Our experiments and simulations indicate that NW arrays can be used to design micrometer-sized polarizers, analyzers, and mirrors which are important optical elements in optoelectronic integrated circuits. 
    more » « less