skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Roof stability in deep rock tunnels
A method is presented addressing quantitative assessment of tunnel roof stability, based on the kinematic approach of limit analysis. Long tunnels with both rectangular (flat-ceiling) and circular cross-sections are considered. The rock is considered to be governed by the Hoek-Brown strength envelope and the normality flow rule, and it is assumed to provide enough ductility at failure, making plasticity theorems applicable. A failing block in the collapse mechanism is separated from the stationary rock by a deformation band with a large gradient of velocity across its width. The shape of the block in the critical mechanism is found from the requirement of the mechanism’s kinematic admissibility and an optimization procedure consistent with respective measures of stability. Both the stability number and the supporting pressure needed for tunnel stability are calculated first. Although less commonly used in rock engineering, a procedure is developed for estimating the factor of safety, defined as the ratio of the rock shear strength determined from the Hoek-Brown criterion to the demand on the strength. Curiously, for flat-ceiling tunnels, such definition of the factor of safety yields results equivalent to the ratio of a dimensionless group dependent on the uniaxial compressive strength and the size of the tunnel to the stability number. Such an equivalency does not hold for tunnels with ceilings of finite curvature. Not surprisingly, all measures of tunnel roof stability are strongly dependent on the Geological Strength Index that describes the quality of the rock.  more » « less
Award ID(s):
1901582
PAR ID:
10133867
Author(s) / Creator(s):
;
Date Published:
Journal Name:
International journal of rock mechanics and mining sciences
Volume:
124
ISSN:
0020-7624
Page Range / eLocation ID:
1-12
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Rock Mechanics and Rock Engineering)
    Three-dimensional stability of roofs in deep flat-ceiling cavities is analyzed. The stability number, factor of safety, and required supporting stress are used as measures of roof stability. Despite the simplicity of the flat roof geometry, the three-dimensional stability analysis presents some complexities owed to the shape of the failure surface geometry in the collapse mechanism. The failure mode assumes a rock block moving downward into the cavity, and the study aims to recognize the most critical shape of the failing block. Three specific block shapes are described in some detail, but more have been analyzed. Blocks defined by a special case of a 4th order conical surface (quartic) on a rectangular base, and a 2nd order elliptic surface (quadric) are found to be the most critical in the stability analysis. The kinematic approach of limit analysis was used, with the rock strength governed by the Hoek-Brown failure criterion. The parametric form of the Hoek-Brown function was employed. Interestingly, an absence of diagonal symmetries in the most critical failure mechanisms was observed in roof collapse of square-ceiling cavities. Computational results in terms of dimensionless measures of stability are presented in charts and tables. 
    more » « less
  2. ; (, Geo-Congress 2022 GSP 336)
    Engineered cavities in rock formations are often part of an underground transportation infrastructure. Three measures of roof stability in such cavities are discussed: the stability number, the factor of safety, and the support pressure needed to prevent cavity roof failure in weak rock. The stability number is a dimensionless combination of the rock properties and the size of the cavity when roof failure becomes imminent. While there exists substantial experience in application of the stability number and the factor of safety to soil structures, their use to define the safety of rock structures is intricate. This is because the strength envelope for rocks is a non-linear function of the mean stress. The specific function used in the analysis is the Hoek-Brown failure criterion. The kinematic approach of limit analysis is used, and the results are presented in charts. All measures of stability are strongly dependent on the Geological Strength Index, and, to a lesser degree, on other parameters in the Hoek-Brown failure criterion. 
    more » « less
  3. ; (, International journal of rock mechanics and mining sciences)
    Three-dimensional failure analyses of slopes are rather elaborate, and for rock slopes, where the rock strength is defined by nonlinear failure envelopes, they are particularly intricate. This is why many earlier approaches used a linear approximation of the strength envelope prior to carrying out the stability analysis. This approximation is avoided in this paper, thanks to using the parametric form of the Hoek-Brown failure criterion. The kinematic approach of limit analysis is used as the method of study. An argument is brought forward that even though rocks tend to fracture at low confining stresses, the ductility of deformation prior to a brittle drop in stress during failure may be sufficient for limit analysis theorems to be applicable. Two measures of rock slope stability are evaluated: the stability number and the factor of safety. Numerical results are presented in the form of charts and tables. Because the limit analysis used allows one to evaluate the rigorous bounds on true solutions, it was possible to demonstrate that the method employed in the paper yields more accurate results than the approaches used formerly in the subject literature. A new and efficient mechanism of failure was devised for very narrow rock slopes. 
    more » « less
  4. ; ; ; (, Energy and Buildings)
    The impact of climate change and global warming makes it imperative to seek sustainable solutions for the built environment. To facilitate the design of future sustainable buildings, wind tunnel tests are conducted in this study to investigate the flow characteristics and wind energy potential over a flat building roof with different edge configurations. Specifically, this study addresses the effect of parapet walls and roof edge-mounted solar panels on the wind flow over a flat-roof tall building. The results show that parapet walls generally slow down the wind speed and increase turbulence intensity as well as skewness angle, which compromises the efficiency of traditional turbine-based wind energy harvesting. On the other hand, the presence of solar panels on the roof edge (or on the top of the parapet wall) further alters flow separation and has the potential to enhance wind energy harvesting over the roof, especially for the solar panel inclined at 30°. In addition to providing valuable data for validating computational fluid dynamics (CFD) simulations, this study could also help to guide the design of wind energy harvesting devices on the building roof and explore the promising synergy with solar panels. 
    more » « less
  5. ; ; ; ; (, Journal of Water Management Modeling)
    The City of Columbus, Ohio is implementing a tunnel system to reduce the number of episodes of combined sewer overflows into the Scioto River. The tunnel systems provide relief to the existing Olentangy Scioto Interceptor Sewer. Two new tunnels being implemented are the OSIS Augmentation and Relief Sewer (OARS), in service since July 2017, and the Lower Olentangy Tunnel (LOT) that is planned to be in service in 2025. The performance of these tunnels in respect to high inflow conditions was investigated with the use of the HAST mixed flow model and the OpenFOAM CFD model to determine the magnitude of surges, the possibility of air pocket entrapment, air–water surging, and the consequences of uncontrolled air pocket releases through shafts. Inflows into the systems were obtained from a calibrated collection system SWMM model. Modeling results quantified surging in the tunnel dropshafts and their mitigation from built-in surge control chambers. HAST simulations also pointed to locations where air pockets could form. These results were used in OpenFOAM to determine the effects of uncontrolled air release through the shaft that links the two tunnels. It was shown that proper ventilation at the shaft will mitigate the growth of air phase pressure to damaging levels. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email