An official website of the United States government
Soft robots employ flexible and compliant materials to perform adaptive tasks and navigate uncertain environments. However, soft robots are often unable to achieve forces and precision on the order of rigid-bodied robots. In this paper, we propose a new class of mobile soft robots that can reversibly transition between compliant and stiff states without reconfiguration. The robot can passively conform or actively control its shape, stiffen in its current configuration to function as a rigid-bodied robot, then return to its flexible form. The robotic structure consists of passive granular material surrounded by an active membrane. The membrane is composed of interconnected robotic sub-units that can control the packing density of the granular material and exploit jamming behaviors by varying the length of the interconnecting cables. Each robotic sub-unit uses a differential drive system to achieve locomotion and self-reconfigurability. We present the robot design and perform a set of locomotion and object manipulation experiments to characterize the robot's performance in soft and rigid states. We also introduce a simulation framework in which we model the jamming soft robot design and study the scalability of this class of robots. The proposed concept demonstrates the properties of both soft and rigid robots, and has the potential to bridge the gap between the two
more »
« less
Granular Jamming Feet Enable Improved Foot-Ground Interactions for Robot Mobility on Deformable Ground
Recent studies on dynamic legged locomotion have focused on incorporating passive compliant elements into robot legs which can help with energy efficiency and stability, enabling them to work in wide range of environments. In this work, we present the design and testing of a soft robotic foot capable of active stiffness control using granular jamming. This foot is designed and tested to be used on soft, flowable ground such as sand. Granular jamming feet enable passive foot shape change when in contact with the ground for adaptability to uneven surfaces, and can also actively change stiffness for the ability to apply sufficient propulsion forces. We seek to study the role of shape change and stiffness change in foot-ground interactions during foot-fall impact and shear. We have measured the acceleration during impact, surface traction force, and the force to pull the foot out of the medium for different states of the foot. We have demonstrated that the control of foot stiffness and shape using the proposed foot design leads to improved locomotion, specifically an approximately 52% reduced foot deceleration at the joints after impact, an approximately 63% reduced depth of penetration in the sand on impact, higher shear force capabilities for a constant depth above the ground, and an approximately 98% reduced pullout force compared to a rigid foot.
more »
« less
- Award ID(s):
- 1837662
- PAR ID:
- 10140061
- Date Published:
- Journal Name:
- IEEE robotics automation letters
- ISSN:
- 2377-3766
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Walking on natural terrain like soil and rock is a challenging problem that has been approached from a variety of strategies such as using sophisticated control methods, compliant legs, and compliant feet. In this paper we explore how to modify granular jamming feet for walking applications by adding stabilizing internal structures. Previous work has explored how granular jamming technology can be used to create compliant and stiffness changing feet that enable locomotion over a diverse range of natural terrain by allowing robot feet to conform around 3D multicomponent terrain such as wood chips and gravel and stiffen, preventing slip. To date, no work has been done to tune granular jamming feet for the specific application of walking. We show that adding internal structures to granular jamming membranes can increase the force they are able to resist without slipping by 1.5x while maintaining their ability to conform around obstacles. When attached to a robot, we see increases in speed of up to 1.4x, decreases in the duty cycle necessary to reach desired foot trajectories of up to 5%, and increases in traction force of up to 1.2x over a diverse set of natural terrain.more » « less
-
Abstract Current studies on human locomotion focus mainly on solid ground walking conditions. In this paper, we present a biomechanical comparison of human walking locomotion on solid ground and sand. A novel dataset containing three-dimensional motion and biomechanical data from 20 able-bodied adults for walking locomotion on solid ground and sand is collected. We present the data collection methods and report the sensor data along with the kinematic and kinetic profiles of joint biomechanics. The results reveal significant gait adaptations to the yielding terrain (i.e., sand), such as increased stance duration, reduced push-off force, and altered joint angles and moments. Specifically, the knee angle during the gait cycle on sand shows a delayed peak flexion and an increased overall magnitude, highlighting an adaptation to maintain stability on yielding terrain. These adjustments, including changes in joint timing and energy conservation mechanisms, provide insights into the motion control strategies humans adopt to navigate on yielding terrains. The dataset, containing synchronized ground reaction forces (GRFs) and kinematic data, offers a valuable resource for further exploration in foot–terrain interactions and human walking assistive devices development on yielding terrains.more » « less
-
This paper describes a new type of compliant and configurable soft robot, a boundary-constrained swarm. The robot consists of a sealed flexible membrane that constrains both a number of mobile robotic subunits and passive granular material. The robot can change the volume fraction of the sealed membrane by applying a vacuum, which gives the robot the ability to operate in two distinct states: compliant and jammed. The compliant state allows the robot to surround and conform to objects or pass through narrow corridors. Jamming allows the robot to form a desired shape; grasp, (a) manipulate, and exert relatively high forces on external objects; and achieve relatively higher locomotion speeds. Locomotion is achieved with a combination of whegs (wheeled legs) and vibration motors that are located on the robotic subunits. The paper describes the mechanical design of the robot, the control methodology, and its object handling capability.more » « less
-
Abstract Elastomer‐granule composites have been used to switch between soft and stiff states by applying negative pressure differentials that cause the membrane to squeeze the internal grains, inducing dilation and jamming. Applications of this phenomenon have ranged from universal gripping to adaptive mobility. Previously, the combination of this jamming phenomenon with the ability to transport grains across multiple soft actuators for shape morphing has not yet been demonstrated. In this paper, the authors demonstrate the use of hollow glass spheres as granular media that functions as a jammable “quasi‐hydraulic” fluid in a fluidic elastomeric actuator that better mimics a key featur of animal musculature: independent control over i) isotonic actuation for motion; and ii) isometric actuation for stiffening without shape change. To best implement the quasi‐hydraulic fluid, the authors design and build a fluidic device. Leveraging this combination of physical properties creates a new option for fluidic actuation that allows higher specific stiffness actuators using lower volumetric flow rates in addition to independent control over shape and stiffness. These features are showcased in a robotic catcher's mitt by stiffening the fluid in the glove's open configuration for catching, unjamming the media, then pumping additional fluid to the mitt to inflate and grasp.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- The DOI is not currently available.
