skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Pump Up the Jam: Granular Media as a Quasi‐Hydraulic Fluid for Independent Control Over Isometric and Isotonic Actuation
Title: Pump Up the Jam: Granular Media as a Quasi‐Hydraulic Fluid for Independent Control Over Isometric and Isotonic Actuation
Abstract Elastomer‐granule composites have been used to switch between soft and stiff states by applying negative pressure differentials that cause the membrane to squeeze the internal grains, inducing dilation and jamming. Applications of this phenomenon have ranged from universal gripping to adaptive mobility. Previously, the combination of this jamming phenomenon with the ability to transport grains across multiple soft actuators for shape morphing has not yet been demonstrated. In this paper, the authors demonstrate the use of hollow glass spheres as granular media that functions as a jammable “quasi‐hydraulic” fluid in a fluidic elastomeric actuator that better mimics a key featur of animal musculature: independent control over i) isotonic actuation for motion; and ii) isometric actuation for stiffening without shape change. To best implement the quasi‐hydraulic fluid, the authors design and build a fluidic device. Leveraging this combination of physical properties creates a new option for fluidic actuation that allows higher specific stiffness actuators using lower volumetric flow rates in addition to independent control over shape and stiffness. These features are showcased in a robotic catcher's mitt by stiffening the fluid in the glove's open configuration for catching, unjamming the media, then pumping additional fluid to the mitt to inflate and grasp.  more » « less
Award ID(s):
1719875
PAR ID:
10367672
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Science
Volume:
9
Issue:
15
ISSN:
2198-3844
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Proceedings of the National Academy of Sciences)
    null (Ed.)
    Regulation systems for fluid-driven soft robots predominantly consist of inflexible and bulky components. These rigid structures considerably limit the adaptability and mobility of these robots. Soft valves in various forms for fluidic actuators have been developed, primarily fluidically or electrically driven. However, fluidic soft valves require external pressure sources that limit robot locomotion. State-of-the-art electrostatic valves are unable to modulate pressure beyond 3.5 kPa with a sufficient flow rate (>6 mL⋅min −1 ). In this work, we present an electrically powered soft valve for hydraulic actuators with mesoscale channels based on a different class of ultrahigh-power density dynamic dielectric elastomer actuators. The dynamic dielectric elastomer actuators (DEAs) are actuated at 500 Hz or above. These DEAs generate 300% higher blocked force compared with the dynamic DEAs in previous works and their loaded power density reaches 290 W⋅kg −1 at operating conditions. The soft valves are developed with compact (7 mm tall) and lightweight (0.35 g) dynamic DEAs, and they allow effective control of up to 51 kPa of pressure and a 40 mL⋅min −1 flow rate with a response time less than 0.1 s. The valves can also tune flow rates based on their driving voltages. Using the DEA soft valves, we demonstrate control of hydraulic actuators of different volumes and achieve independent control of multiple actuators powered by a single pressure source. This compact and lightweight DEA valve is capable of unprecedented electrical control of hydraulic actuators, showing the potential for future onboard motion control of soft fluid-driven robots. 
    more » « less
  2. ; ; ; ; ; (, Advanced Intelligent Systems)
    Fluid‐driven artificial muscles exhibit a behavior similar to biological muscles which makes them attractive as soft actuators for wearable assistive robots. However, state‐of‐the‐art fluidic systems typically face challenges to meet the multifaceted needs of soft wearable robots. First, soft robots are usually constrained to tethered pressure sources or bulky configurations based on flow control valves for delivery and control of high assistive forces. Second, although some soft robots exhibit untethered operation, they are significantly limited to low force capabilities. Herein, an electrohydraulic actuation system that enables both untethered and high‐force soft wearable robots is presented. This solution is achieved through a twofold design approach. First, a simplified direct‐drive actuation paradigm composed of motor, gear‐pump, and hydraulic artificial muscle (HAM) is proposed, which allows for a compact and lightweight (1.6 kg) valveless design. Second, a fluidic engine composed of a high‐torque motor with a custom‐designed gear pump is created, which is capable of generating high pressure (up to 0.75 MPa) to drive the HAM in delivering high forces (580 N). Experimental results show that the developed fluidic engine significantly outperforms state‐of‐the‐art systems in mechanical efficiency and suggest opportunities for effective deployment in soft wearable robots for human assistance. 
    more » « less
  3. ; ; ; ; ; (, Advanced Materials)
    Abstract Recent work has demonstrated the potential of actuators consisting of bulk elastomers with phase‐changing inclusions for generating high forces and large volumetric expansions. Simultaneously, granular assemblies have been shown to enable tunable properties via different packings, dynamic moduli via jamming, and compatibility with various printing methods via suspension in carrier fluids. Herein, granular actuators are introduced, which represent a new class of soft actuators made of discrete grains. The soft grains consist of a hyperelastic shell and multiple solvent cores. Upon heating, the encapsulated solvent cores undergo liquid‐to‐gas phase change, inducing rapid and strong volumetric expansion of the hyperelastic shell up to 700%. The grains can be used independently for micro‐actuation, or in granular agglomerates for meso‐ and macroscale actuation, demonstrating the scalability of the granular actuators. Furthermore, the active grains can be suspended in a carrier resin or solvent to enable printable soft actuators via established granular material processing techniques. By combining the advantages of phase‐change soft actuation and granularity, this work presents the opportunity to realize soft actuators with tunable bulk properties, compatibility with self‐assembly techniques, and on‐demand reconfigurability. 
    more » « less
  4. ; ; ; ; (, IEEE)
    Jamming actuators have been proposed for many portable or wearable applications, yet the performance of these actuators will vary widely with fluidic leaks that degrade vacuum pressure and therefore maximum stiffness and stiffness over time. We investigate the power consumption and pressure in a series of leaky jamming actuators using four approaches: continuous jamming, jamming once, and re-jamming at regular intervals or if the pressure falls outside a specified range. We demonstrate the pressures and power consumptions of these approaches in a soft gripper and an active robotic elbow brace. We found that re-jamming when pressure fell below a target range reduced power consumption by more than a factor of 7.5 over continuous jamming while maintaining performance. These findings, and other efficient re-jamming approaches, will be crucial to jamming robots that can operate after damage and untethered for multiple hours. 
    more » « less
  5. ; ; ; (, Springer, Cham.)
    Sensing and actuation are intricately connected in soft robotics, where contact may change actuator mechanics and robot behavior. To improve soft robotic control and performance, proprioception and contact sensors are needed to report robot state without altering actuation mechanics or introducing bulky, rigid components. For bioinspired McKibben-style fluidic actuators, prior work in sensing has focused on sensing the strain of the actuator by embedding sensors in the actuator bladder during fabrication, or by adhering sensors to the actuator surface after fabrication. However, material property mismatches between sensors and actuators can impede actuator performance, and many soft sensors available for use with fluidic actuators rely on costly or labor-intensive fabrication methods. Here, we demonstrate a low-cost and easy-to manufacture-tubular liquid metal strain sensor for use with soft actuators that can be used to detect actuator strain and contact between the actuator and external objects. The sensor is flexible, can be fabricated with commercial-off-the-shelf components, and can be easily integrated with existing soft actuators to supplement sensing, regardless of actuator shape or size. Furthermore, the soft tubular strain sensor exhibits low hysteresis and high sensitivity. The approach presented in this work provides a low-cost, soft sensing solution for broad application in soft robotics. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email