Spatially resolved in situ transmission electron microscopy (TEM), equipped with direct electron detection systems, is a suitable technique to record information about the atom-scale dynamics with millisecond temporal resolution from materials. However, characterizing dynamics or fluxional behavior requires processing short time exposure images which usually have severely degraded signal-to-noise ratios. The poor signal-to-noise associated with high temporal resolution makes it challenging to determine the position and intensity of atomic columns in materials undergoing structural dynamics. To address this challenge, we propose a noise-robust, processing approach based on blob detection, which has been previously established for identifying objects in images in the community of computer vision. In particular, a blob detection algorithm has been tailored to deal with noisy TEM image series from nanoparticle systems. In the presence of high noise content, our blob detection approach is demonstrated to outperform the results of other algorithms, enabling the determination of atomic column position and its intensity with a higher degree of precision.
- Award ID(s):
- 1308085
- NSF-PAR ID:
- 10141526
- Date Published:
- Journal Name:
- Microscopy and Microanalysis
- Volume:
- 26
- Issue:
- 1
- ISSN:
- 1431-9276
- Page Range / eLocation ID:
- 86 to 94
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract The use of transmission electron microscopy (TEM) to observe real-time structural and compositional changes has proven to be a valuable tool for understanding the dynamic behavior of nanomaterials. However, identifying the nanoparticles of interest typically require an obvious change in position, size, or structure, as compositional changes may not be noticeable during the experiment. Oxidation or reduction can often result in subtle volume changes only, so elucidating mechanisms in real-time requires atomic-scale resolution or
in-situ electron energy loss spectroscopy, which may not be widely accessible. Here, by monitoring the evolution of diffraction contrast, we can observe both structural and compositional changes in iron oxide nanoparticles, specifically the oxidation from a wüstite-magnetite (FeO@Fe3O4) core– shell nanoparticle to single crystalline magnetite, Fe3O4nanoparticle. Thein-situ TEM images reveal a distinctive light and dark contrast known as the ‘Ashby-Brown contrast’, which is a result of coherent strain across the core– shell interface. As the nanoparticles fully oxidize to Fe3O4, the diffraction contrast evolves and then disappears completely, which is then confirmed by modeling and simulation of TEM images. This represents a new, simplified approach to tracking the oxidation or reduction mechanisms of nanoparticles usingin-situ TEM experiments. -
Octahedrally shaped Pt–Ni alloy nanoparticles on carbon supports have demonstrated unprecedented electrocatalytic activity for the oxygen reduction reaction (ORR), sparking interest as catalysts for low-temperature fuel cell cathodes. However, deterioration of the octahedral shape that gives the catalyst its superior activity currently prohibits the use of shaped catalysts in fuel cell devices, while the structural dynamics of the overall catalyst degradation are largely unknown. We investigate the time-resolved degradation pathways of such a Pt–Ni alloy catalyst supported on carbon during cycling and startup/shutdown conditions using an in situ STEM electrochemical liquid cell, which allows us to track changes happening over seconds. Thereby we can precisely correlate the applied electrochemical potential with the microstructural response of the catalyst. We observe changes of the nanocatalysts’ structure, monitor particle motion and coalescence at potentials that corrode carbon, and investigate the dissolution and redeposition processes of the nanocatalyst under working conditions. Carbon support motion, particle motion, and particle coalescence were observed as the main microstructural responses to potential cycling and holds in regimes where carbon corrosion happens. Catalyst motion happened more severely during high potential holds and sudden potential changes than during cyclic potential sweeps, despite carbon corrosion happening during both, as suggested by ex situ DEMS results. During an extremely high potential excursion, the shaped nanoparticles became mobile on the carbon support and agglomerated facet-to-facet within 10 seconds. These experiments suggest that startup/shutdown potential treatments may cause catalyst coarsening on a much shorter time scale than full collapse of the carbon support. Additionally, the varying degrees of attachment of particles on the carbon support indicates that there is a distribution of interaction strengths, which in the future should be optimized for shaped particles. We further track the dissolution of Ni nanoparticles and determine the dissolution rate as a function of time for an individual nanoparticle – which occurs over the course of a few potential cycles for each particle. This study provides new visual understanding of the fundamental structural dynamics of nanocatalysts during fuel cell operation and highlights the need for better catalyst-support anchoring and morphology for allowing these highly active shaped catalysts to become useful in PEM fuel cell applications.more » « less
-
more » « less
Structural coloration frequently originates from the interaction of light with multilayers of thin films in living organisms. One example where structural colors are created by multilayers is the jewel beetle,
Chrysochroa fulgidissima , which has highly iridescent green elytra with longitudinal red stripes. We examine the structure, chemical information, and physical properties of the epicuticle of the jewel beetle by using atomic force microscopy (AFM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nanoindentation, and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). AFM and SEM were used to analyze the surface structures of the green elytra and red stripes of the jewel beetle's wing. SEM and TEM images obtained from the cross‐sectioned cuticle samples of green and red areas indicated that the color arises from interference reflectors and reflectors consist of successive repeating layers of different electronic densities. Nanoindentation results showed that the green area of the elytron possesses a higher hardness and reduced modulus compared with the red area. To analyze the surface of the elytra and to compare multilayers of the green area with those of the red area, mass spectra and depth profiles were acquired by ToF‐SIMS with C60and Ar cluster ion beams. The epicuticle consists of several layers with alternating high and low abundances of inorganic and organic fragment ions, with approximately 16 layers in the green and 12 layers in the red area. Therefore, ToF‐SIMS combined with other analytical techniques indicate that multilayer reflection is a major mechanism of the jewel beetle's iridescence causing structural coloration. -
more » « less
Abstract Deploying energy storage and carbon capture at scale is hindered by the substantial endothermic penalty of decomposing CaCO3to CaO and CO2, and the rapid loss of CO2absorption capacity by CaO sorbent particles due to sintering at the high requisite decomposition temperatures. The decomposition reaction mechanism underlying sorbent deactivation remains unclear at the atomic level and nanoscale due to past reliance on postmortem characterization methods with insufficient spatial and temporal resolution. Thus, elucidating the important CaCO3decomposition reaction pathway requires direct observation by time‐resolved (sub‐)nanoscale methods. Here, chemical and structural dynamics during the decomposition of CaCO3nanoparticles to nanoporous CaO particles comprising high‐surface‐area CaO nanocrystallites are examined. Comparing in situ transmission electron microscopy (TEM) and synchrotron X‐ray diffraction experiments gives key insights into the dynamics of nanoparticle calcination, involving anisotropic CaCO3thermal distortion before conversion to thermally dilated energetically stable CaO crystallites. Time‐resolved TEM uncovered a novel CaO formation mechanism involving heterogeneous nucleation at extended CaCO3defects followed by sweeping reaction front motion across the initial CaCO3particle. These observations clarify longstanding, yet incomplete, reaction mechanisms and kinetic models lacking accurate information about (sub‐)nanoscale dynamics, while also demonstrating calcination of CaCO3without sintering through rapid heating and precise temperature control.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1017/S1431927619015228
