skip to main content


Title: Preadsorbed SO3 Inhibits Oxygen Atom Activity for Mercury Adsorption on Cu/Mn Doped CeO2(110) Surface
The coadsorption of Hg0 and SO3 on pure and Cu/Mn doped CeO2(110) surfaces were investigated using the Density Functional Theory (DFT) method. A p (2 × 2) supercell periodic slab model with seven atomic layers was constructed to represent the CeO2(110) surface. The results indicated that Hg0 physically adsorbed on the CeO2(110) surface, while Hg0 chemically adsorbed on the Cu/Mn doped CeO2(110) surface, which agree well with the experimental results that Cu and Mn doped CeO2 greatly improved the Hg0 adsorption capacity of the adsorbent. The calculated results suggested that SO3 more easily adsorbs on the above three surfaces than Hg0 due to the higher adsorption energy. The adsorption configurations and electronic structures indicated SO3 reacted with O atoms of the surface to form SO42− species. Hence, SO3 inhibits Hg0 adsorption on the CeO2(110) surface by competing with Hg0 for surface lattice oxygen. In addition, SO3 decreased the activity of the surface O atoms, which directly caused the negative effect on Hg0 adsorption.  more » « less
Award ID(s):
1632899
NSF-PAR ID:
10142820
Author(s) / Creator(s):
; ; ; ; ; ;
Date Published:
Journal Name:
Energy & Fuels
ISSN:
0887-0624
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    A fundamental understanding of the enantiospecific interactions between chiral adsorbates and understanding of their interactions with chiral surfaces is key to unlocking the origins of enantiospecific surface chemistry. Herein, the adsorption and decomposition of the amino acid proline (Pro) have been studied on the achiral Cu(110) and Cu(111) surfaces and on the chiral Cu(643)R&Ssurfaces. Isotopically labelled 1‐13C‐l‐Pro has been used to probe the Pro decomposition mechanism and to allow mass spectrometric discrimination ofd‐Pro and 1‐13C‐l‐Pro when adsorbed as mixtures. On the Cu(111) surface, X‐ray photoelectron spectroscopy reveals that Pro adsorbs as an anionic species in the monolayer. On the chiral Cu(643)R&Ssurface, adsorbed Pro enantiomers decompose with non‐enantiospecific kinetics. However, the decomposition kinetics were found to be different on the terraces versus the kinked steps. Exposure of the chiral Cu(643)R&Ssurfaces to a racemic gas phase mixture ofd‐Pro and 1‐13C‐l‐Pro resulted in the adsorption of a racemic mixture; i.e., adsorption is not enantiospecific. However, exposure to non‐racemic mixtures ofd‐Pro and 1‐13C‐l‐Pro resulted in amplification of enantiomeric excess on the surface, indicative of homochiral aggregation of adsorbed Pro. During co‐adsorption, this amplification is observed even at very low coverages, quite distinct from the behavior of other amino acids, which begin to exhibit homochiral aggregation only after reaching monolayer coverages. The equilibrium adsorption ofd‐Pro and 1‐13C‐l‐Pro mixtures on achiral Cu(110) did not display any aggregation, consistent with prior scanning tunneling microscopy (STM) observations ofdl‐Pro/Cu(110). This demonstrates convergence between findings from equilibrium adsorption methods and STM experiments and corroborates formation of a 2D random solid solution.

     
    more » « less
  2. Low bond coordination of surface atoms facilitates the injection of oxygen interstitial atoms into the bulk near room temperature from the clean surfaces of semiconducting metal oxides when exposed to liquid water, opening new prospects for postsynthesis defect engineering and isotopic fractionation. The injection rate and penetration depth vary considerably under identical experimental conditions, however, with the adsorption of adventitious carbon suggested as the cause. For water-submerged rutile TiO2(110) and wurtzite ZnO(0001), this work bolsters and refines that hypothesis by combining the isotopic self-diffusion measurements of oxygen with characterization by x-ray photoelectron spectroscopy and atomic force microscopy. Adventitious carbon likely diminishes injection rates by poisoning small concentrations of exceptionally active surface sites that either inject O or dissociate adsorbed OH to injectable O. These effects propagate into the penetration depth via the progressive saturation of Oi traps near the surface, which occurs less extensively as the injected flux decreases.

     
    more » « less
  3. Abstract

    Density functional theory (DFT) and microkinetic modeling are used to examine the water‐gas shift (WGS) reaction on TiO2(110)‐supported single Pt atoms. A CO‐adsorbed Pt atom supported on a TiO2surface exhibits a lower activity for the WGS than the Pt2+ion supported on a doped TiO2surface, although DFT predicts the CO‐adsorbed Pt on an undoped TiO2surface to be thermodynamically more stable. Trends observed in WGS activity for different active sites of TiO2‐supported Pt catalysts can be explained in terms of CO adsorption strength and the ability to form an oxygen vacancy on the oxide support.

     
    more » « less
  4. Despite their atmospheric abundance, heterogeneous and multiphase reactions of carbonyl compounds are poorly understood. In this study, we investigate the surface adsorption and surface chemistry of methyl ethyl ketone (MEK), the second most abundant ketone in the atmosphere, with several mineral oxide surfaces including SiO 2 , α-Fe 2 O 3 and TiO 2 . In particular, the chemistry of MEK with these common components of mineral dust, under both dry and high relative humidity (RH%) conditions, has been investigated. Furthermore, reactions of adsorbed MEK with gas-phase NO 2 were also examined. We show that MEK molecularly and reversibly adsorbs on SiO 2 whereas irreversible adsorption occurs on both α-Fe 2 O 3 and TiO 2 surfaces, followed by the formation of higher molar mass species resulting from dimerization and oligomerization reactions. Isotope labeling experiments confirmed the incorporation of H atoms from surface hydroxyl groups and strongly adsorbed water into these oligomer products. Most interesting is that at 80% RH, oligomer formation on α-Fe 2 O 3 shifts toward a higher relative abundance of MEK tetramer relative to the dimer while on TiO 2 there was no change in product distribution. In the presence of gas-phase NO 2 , MEK undergoes degradation to formaldehyde and acetaldehyde, followed by the formation of aldol condensation products of these aldehydes on the α-Fe 2 O 3 surface. Overall, this study provides mechanistic insights on mineralogy-specific heterogeneous chemistry of a prevalent and atmospherically abundant ketone. 
    more » « less
  5. The adsorption and decomposition of HCN on the Pd(111) and Ru(001) surfaces have been studied with reflection absorption infrared spectroscopy and density functional theory calculations. The results are compared to earlier studies of HCN adsorption on the Pt(111) and Cu(100) surfaces. In all cases the initial adsorption at low temperatures gives rise to a ν (C–H) stretch peak at ∼3300 cm −1 , which is very close to the gas phase value indicating that the triple CN bond is retained for the adsorbed molecule. When the Pd(111) surface is heated to room temperature, the HCN is converted to the aminocarbyne species, CNH 2 , which was also observed on the Pt(111) surface. DFT calculations confirm the high stability of CNH 2 on Pd(111), and suggest a bi-molecular mechanism for its formation. When HCN on Cu(100) is heated, it desorbs without reaction. In contrast, no stable intermediates are detected on Ru(001) as the surface is heated, indicating that HCN decomposes completely to atomic species. 
    more » « less