skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Predictive design of polymer molecular weight distributions in anionic polymerization
Molecular weight distributions (MWD) have a substantial impact on a diverse set of polymer physical and rheological properties, from processability and stiffness to many aspects of block copolymer microphase behavior. The precise MWD compositions of these polymers can be modularly controlled through temporal initiation in anionic polymerizations by metered addition of a discrete initiating species. With the technique described in this work, we identify initiator addition profiles through theoretical modeling which can be used to prepare any desired arbitrary MWD. This kinetic model reproduces experimental MWDs with high fidelity. Our modeling strategy incorporates a detailed kinetic description of polymer initiation and propagation, including the association and dissociation equilibria of the living polymer chain ends. We simplify the kinetic model by incorporating the aggregation phenomena into an effective propagation rate constant k p , allowing it to vary with the polymer chain length ( i ). Importantly, this model also yields the ability to predict MWDs at any arbitrary value of monomer conversion during the polymerization. Lastly, we simulate MWDs for a variety of new, yet unmeasured, initiator addition profiles, demonstrating the predictability of this approach.  more » « less
Award ID(s):
1719875
PAR ID:
10147064
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Polymer Chemistry
Volume:
11
Issue:
2
ISSN:
1759-9954
Page Range / eLocation ID:
326 to 336
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Nature Communications)
    Abstract The properties of a polymer are known to be intrinsically related to its molecular weight distribution (MWD); however, previous methodologies of MWD control do not use a design and result in arbitrary shaped MWDs. Here we report a precise design to synthesis protocol for producing a targeted MWD design with a simple to use, and chemistry agnostic computer-controlled tubular flow reactor. To support the development of this protocol, we constructed general reactor design rules by combining fluid mechanical principles, polymerization kinetics, and experiments. The ring opening polymerization of lactide, the anionic polymerization of styrene, and the ring opening metathesis polymerization are used as model polymerizations to develop the reactor design rules and synthesize MWD profiles. The derivation of a mathematical model enables the quantitative prediction of the experimental results, and this model provides a tool to explore the limits of any MWD design protocol. 
    more » « less
  2. ; ; (, Polymer Chemistry)
    null (Ed.)
    Reversible addition–fragmentation chain-transfer (RAFT) polymerizations are one of the most versatile and powerful polymerization techniques for the synthesis of complex macromolecular architectures. While RAFT polymerizations often give polymers with narrow molecular weight distributions (MWDs), commodity plastics often have broad MWDs to give targeted properties and processability. Thus, new methods to precisely control both MWD breadth and shape are essential for fine-tuning polymer properties for next generation materials. Herein, we report a simple method for controlling polymer MWD features in thermally activated radical RAFT and redox activated cationic RAFT polymerizations by means of metered additions of chain transfer agents. 
    more » « less
  3. ; ; ; ; ; (, Journal of Polymer Science Part A: Polymer Chemistry)
    ABSTRACT Cellulose‐based polymer brushes with variable grafting densities and low dispersity were synthesized by grafting poly(n‐butyl acrylate) (PBA) side chains from cellulose‐derived backbones via ATRP. Esterification of commercially available cellulose acetate with 2‐bromoisobutyryl bromide (2‐BiBB) in NMP provided cellulose‐based macroinitiators averaging one initiation site per double glucose unit. ATRP macroinitiators averaging up to 6 initiation sites per repeating double glucose unit were prepared by acylation of microcrystalline cellulose (MCC) in LiCl/DMAc solvent system with 2‐BiBB. A series of linear macroinitiators with narrow MWD were obtained by fractional precipitation process. The content of initiating sites was determined by elemental analysis. (Meth)acrylate side chains were then grafted from the cellulose‐based macroinitiators. The prepared cellulose‐based polymer brushes showed tunable degradation rates dependent on grafting density of the brush, following two different degradation pathways, either cleavage of the main chain or detachment of the side chains. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem.2019,57, 2426–2435 
    more » « less
  4. ; ; ; ; ; ; (, Journal of Polymer Science Part A: Polymer Chemistry)
    ABSTRACT The stability of nonpatterned and nanopatterned strong polyelectrolyte brushes (PEBs) is studied as a function of both brush character and the properties of a contacting liquid. High‐molecular‐weight PEBs of poly(4‐methyl vinylpyridinium iodide) (PMeVP) are synthesized using surface‐initiated radical‐chain polymerization. Nanopatterned brushes (NPBs) line with pattern sizes ranging from 50 to 200 nm are generated by patterning the initiator layer using deep‐ultraviolet photolithography followed by brush growth initiated from the patterned layer. Homogeneous PEBs with different degrees of charging and grafting densities are exposed to water and salt solutions with different temperatures for different periods. The degradation is monitored through dry‐state ellipsometry and atomic force microscopy measurements. Enhanced degrafting for more strongly swollen polymer brushes can be observed in agreement with an “entropic spring” model. Based on the results of the nonpatterned brushes, the NPBs are exposed to water at different temperatures and external salt content for varying periods of time. Counterintuitively, the NPBs show increased degrafting for smaller patterns, which is attributed to different polymer chain dynamics for nanobrushes and microbrushes. We investigate the influence of thermodynamic and kinetic parameters on the stability of (nanopatterned) PEBs and discuss the role of entanglements and formation of complexes in such films. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1283–1295 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Journal of Polymer Science)
    Abstract A versatile synthetic platform is reported that affords high molecular weight graft copolymers containing polydimethylsiloxane (PDMS) backbones and vinyl‐based polymer side chains with excellent control over molecular weight and grafting density. The synthetic approach leverages thiol‐ene click chemistry to attach an atom‐transfer radical polymerization (ATRP) initiator to a variety of commercially available poly(dimethylsiloxane‐co‐methylvinylsiloxane) backbones (PDMS‐co‐PVMS), followed by controlled radical polymerization with a wide scope of vinyl monomers. Selective degradation of the siloxane backbone with tetrabutylammonium fluoride confirmed the controlled nature of side‐chain growth via ATRP, yielding targeted side‐chain lengths for copolymers containing up to 50% grafting density and overall molecular weights in excess of 1 MDa. In addition, by using a mixture of thiols, grafting density and functionality can be further controlled by tuning initiator loading along the backbone. For example, solid‐state fluorescence of the graft copolymers was achieved by incorporating a thiol‐containing fluorophore along the siloxane backbone during the thiol‐ene click reaction. This simple synthetic platform provides facile control over the properties of a wide variety of grafted copolymers containing flexible PDMS backbones and vinyl polymer side chains. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email