An official website of the United States government
Metamaterials are engineered periodic structures designed to have unique properties not encountered in naturally occurring materials. One such unusual property of metamaterials is the ability to exhibit negative refractive index over a prescribed range of frequencies. A lens made of negative refractive index metamaterials can achieve resolution beyond the diffraction limit. This paper presents the design of a metamaterial lens and its use in far-field microwave imaging for subwavelength defect detection in nondestructive evaluation (NDE). Theoretical formulation and numerical studies of the metamaterial lens design are presented followed by experimental demonstration and characterization of metamaterial behavior. Finally, a microwave homodyne receiver-based system is used in conjunction with the metamaterial lens to develop a far-field microwave NDE sensor system. A subwavelength focal spot of size 0.82λ was obtained. The system is shown to be sensitive to a defect of size 0.17λ × 0.06λ in a Teflon sample. Consecutive positions of the defect with a separation of 0.23λ was resolvable using the proposed system.
more »
« less
Model-Based Study of a Metamaterial Lens for NDE of Composites
Abstract Composites are being increasingly used in various industries due to their lower cost and superior mechanical properties over traditional materials. They are nevertheless vulnerable to various defects during manufacturing or usage which can cause failure of critical engineering structures. Hence, there is a growing need for nondestructive evaluation (NDE) of composites to detect such defective structures and avoid significant loss and damages. Microwave NDE has several advantages over other existing NDE techniques for detecting defects or faults in non-conducting composites or dielectrics. One of the primary benefits of microwaves are large probe-standoff distances which allow for rapid scan times. However, the resolution of such far-field microwave sensors are diffraction limited. Metamaterials-based lens, also known as ‘superlens’, can achieve resolution beyond the diffraction limits by virtue of its unique electromagnetic (EM) properties. This contribution focuses on the physical design of a metamaterial lens. The theory underlying the design of a metamaterial lens is presented followed by simulation and experimental results. The paper also investigates the feasibility of using the metamaterial lens for improving the resolution on microwave imaging in NDE of composites.
more »
« less
- Award ID(s):
- 1762331
- PAR ID:
- 10156331
- Date Published:
- Journal Name:
- Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems
- Volume:
- 3
- Issue:
- 4
- ISSN:
- 2572-3901
- Page Range / eLocation ID:
- 1 to 18
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This paper presents the design, simulation and experimental validation of a gradient-index (GRIN) metasurface lens operating at 8 GHz for microwave imaging applications. The unit cell of the metasurface consists of an electric-LC (ELC) resonator. The effective refractive index of the metasurface is controlled by varying the capacitive gap at the center of the unit cell. This allows the design of a gradient index surface. A one-dimensional gradient index lens is designed and tested at first to describe the operational principle of such lenses. The design methodology is extended to a 2D gradient index lens for its potential application as a microwave imaging device. The metasurface lenses are designed and analyzed using full-wave finite element (FEM) solver. The proposed 2D lens has an aperture of size 119 mm (3.17λ) × 119 mm (3.17λ) and thickness of only 0.6 mm (0.016λ). Horn antenna is used as source of plane waves incident on the lens to evaluate the focusing performance. Field distributions of the theoretical designs and fabricated lenses are analyzed and are shown to be in good agreement. A microwave nondestructive evaluation (NDE) experiment is performed with the 2D prototype lens to image a machined groove in a Teflon sample placed at the focal plane of the lens.more » « less
-
Metamaterials and composite structures are able to manipulate waves and focus fields and currents in desirable directions. Designs based on spatial and temporal variation of material properties create structures forcing fluxes into specified parts of the domain or concentrating energy into arrays of progressively sharpening pulses. The paper discusses examples of focusing structures, mathematical and intuitive considerations that influence optimal design theory. The optimality requirement introduces zones of optimal composites with variable microgeometry. The observed absence of classical solutions motivates the extension of the class of optimal partitions to composites. Such materials also provide a solution to the problem of optimal design of a thermal lens focusing thermal fluxes when the incoming fluxes are not completely known in advance. An extension of designs to dynamical materials such as space–time checkerboard composites introduces metamaterials with additional capabilities that control the accumulation of energy in the propagating waves. The discussed mathematical methods of focusing and suitable properties alternation targeted on optimality are illustrated by physical examples.more » « less
-
Maturing of additive manufacturing (AM) techniques has increased their utilization for fabricating radio frequency (RF) and microwave devices. Solid composites used in material extrusion AM have experienced considerable expansion over the past decade, incorporating functional properties into 3D-printed objects. There are encouraging indications from AM material research that electrically efficient AM materials can be discovered. These materials would be useful for producing microwave components in the future. One of the enabling techniques for fabricating these materials is to incorporate nano/microparticles or fillers into thermoplastic material. Composite material 3D printing is a novel approach to managing materials’ microwave properties. While extrinsic qualities (effective permittivity) can be controlled by shape and porosity management, intrinsic attributes are tied to the composition of composites. Furthermore, combining various materials to increase the spectrum of available microwave characteristics is made possible by multi-material 3D printing. In this chapter, we explore different methodologies to fabricate ceramic/thermoplastic composites for fused deposition modeling (FDM) of RF and microwave devices. Analytical models for predicting effective permittivity of the composite are discussed and application examples of FDM printed RF, microwave and mm-wave devices employing composites are presented.more » « less
-
null (Ed.)The use of non-metallic composites that are durable, low cost, and lightweight is growing fast in various industries. A commonly used form of these materials is in the shape of pipes that can be used, for instance, in oil and gas industry. Such pipes can be damaged due to material loss (defects and holes), erosions, and more which may cause major production failures or environmental mishaps. To prevent these issues, non-destructive testing (NDT) methods need to be employed for regular inspections of such components. Since traditional NDT methods are mainly used for metallic pipes, recently microwave imaging has been proposed as a promising approach for examination of non-metallic pipes. While microwave imaging can be employed for inspection of multiple layers of pipes, the effect of undesired eccentricity of the pipes can impose additional imaging errors. In this paper, for the first time, we study the effect of eccentricity of the pipes on the images reconstructed using near-field holographic microwave imaging when imaging double pipes.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1115/1.4047027
