skip to main content


Title: 2D MXene-containing polymer electrolytes for all-solid-state lithium metal batteries
Nanocomposite polymer electrolytes (CPEs) are promising materials for all-solid-state lithium metal batteries (LMBs) due to their enhanced ionic conductivities and stability to the lithium anode. MXenes are a new two-dimensional, 2D, family of early transition metal carbides and nitrides, which have a high aspect ratio and a hydrophilic surface. Herein, using a green, facile aqueous solution blending method, we uniformly dispersed small amounts of Ti 3 C 2 T x into a poly(ethylene oxide)/LiTFSI complex (PEO 20 -LiTFSI) to fabricate MXene-based CPEs (MCPEs). The addition of the 2D flakes to PEO simultaneously retards PEO crystallization and enhances its segmental motion. Compared to the 0D and 1D nanofillers, MXenes show higher efficiency in ionic conductivity enhancement and improvement in the performance of LMBs. The CPE with 3.6 wt% MXene shows the highest ionic conductivity at room temperature (2.2 × 10 −5 S m −1 at 28 °C). An LMB using MCPE with only 1.5 wt% MXene shows rate capability and stability comparable with that of the state-of-the-art CPELMBs. We attribute the excellent performance to the 2D geometry of the filler, the good dispersion of the flakes in the polymer matrix, and the functional group-rich surface.  more » « less
Award ID(s):
1740795
NSF-PAR ID:
10156816
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ;
Date Published:
Journal Name:
Nanoscale Advances
Volume:
1
Issue:
1
ISSN:
2516-0230
Page Range / eLocation ID:
395 to 402
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    MXenes are 2D materials with relatively high surface areas, high electrical conductivities, functional transition metal surfaces, tunable surface chemistries, and solution processability. Due to these properties, 2D MXenes have attracted widespread attention as electrode materials for energy storage devices, including electrochemical capacitors, with high power and energy densities. However, many studies have shown that the electrochemical performance of MXene electrodes is considerably affected by their structure and morphology. These properties are, for the most part, controlled by the method used for the assembly of 2D MXene flakes and the electrode fabrication methods. A successful electrode assembly and fabrication method should address several challenges, such as the restacking of 2D flakes, to achieve electrode structures and morphologies that deliver high ionic transport properties, electrical conductivity, and mechanical stability. This review aims to provide insight into the current state‐of‐the‐art assembly and fabrication methods used to design and fabricate high performance electrodes based on MXenes. The major challenges to be addressed and possible future directions in the fabrication of MXene electrodes for practical energy storage applications are highlighted.

     
    more » « less
  2. Abstract

    MXenes, a family of 2D transition‐metal carbides and nitrides, have excellent electrical conductivity and unique optical properties. However, MXenes oxidize in ambient conditions, which is accelerated upon heating. Intercalation of water also causes hydrolysis accelerating oxidation. Developing new tools to readily characterize MXenes’ thermal stability can enable deeper insights into their structure–property relationships. Here, in situ spectroscopic ellipsometry (SE) is employed to characterize the optical properties of three types of MXenes (Ti3C2Tx, Mo2TiC2Tx, and Ti2CTx) with varied composition and atomistic structures to investigate their thermal degradation upon heating under ambient environment. It is demonstrated that changes in MXene extinction and optical conductivity in the visible and near‐IR regions correlate well with the amount of intercalated water and hydroxyl termination groups and the degree of oxidation, measured using thermogravimetric analysis. Among the three MXenes, Ti3C2Txand Ti2CTx, respectively, have the highest and lowest thermal stability, indicating the role of transition‐metal type, synthesis route, and the number of atomic layers in MXene flakes. These findings demonstrate the utility of SE as a powerful in situ technique for rapid structure–property relationship studies paving the way for the further design, fabrication, and property optimization of novel MXene materials.

     
    more » « less
  3. MXenes, a new class of 2D transition metal carbides and carbonitrides, show great promise in supercapacitors, Li‐ion batteries, fuel cells, and sensor applications. A unique combination of their metallic conductivity, hydrophilic surface, and excellent mechanical properties renders them attractive for transparent conductive electrode application. Here, a simple, scalable method is proposed to fabricate transparent conductive thin films using delaminated Ti3C2MXene flakes by spray coating. Homogenous films, 5–70 nm thick, are produced at ambient conditions over a large area as shown by scanning electron microscopy and atomic force microscopy. The sheet resistances (Rs) range from 0.5 to 8 kΩ sq−1at 40% to 90% transmittance, respectively, which corresponds to figures of merit (the ratio of electronic to optical conductivities,σDC/σopt) around 0.5–0.7. Flexible, transparent, and conductive films are also produced and exhibit stableRsvalues at up to 5 mm bend radii. Furthermore, the films' optoelectronic properties are tuned by chemical or electrochemical intercalation of cations. The films show reversible changes of transmittance in the UV–visible region during electrochemical intercalation/deintercalation of tetramethylammonium hydroxide. This work shows the potential of MXenes to be used as transparent conductors in electronic, electrochromic, and sensor applications.

     
    more » « less
  4. Abstract

    Solid polymer electrolytes (SPEs) promise to improve the safety and performance of lithium ion batteries (LIBs). However, the low ionic conductivity and transference number of conventional poly(ethylene oxide) (PEO)‐based SPEs preclude their widespread implementation. Herein, crosslinked poly(tetrahydrofuran) (xPTHF) is introduced as a promising polymer matrix for “beyond PEO” SPEs. The crosslinking procedure creates thermally stable, mechanically robust membranes for use in LIBs. Molecular dynamics and density functional theory (DFT) simulations accompanied by7Li NMR measurements show that the lower spatial concentration of oxygen atoms in the xPTHF backbone leads to loosened O–Li+coordination. This weakened interaction enhances ion transport; xPTHF has a high lithium transference number of 0.53 and higher lithium conductivity than a xPEO SPE of the same length at room temperature. It is demonstrated that organic additives further weaken the O–Li+interaction, enabling room temperature ionic conductivity of 1.2 × 10−4S cm−1with 18 wt%N,N‐dimethylformamide in xPTHF. In a solid‐state LIB application, neat xPTHF SPEs cycle with near theoretical capacity for 100 cycles at 70 °C, with rate capability up to 1 C. The plasticized xPTHF SPEs operate at room temperature while maintaining respectable rate capability and capacity. The novel PTHF system demonstrated here represents an exciting platform for future studies involving SPEs.

     
    more » « less
  5. Abstract The two-dimensional (2D) titanium carbides ( T i n + 1 C n ) belong to the MXene family, with carbon and titanium alternating in a flake structure, and are emerging options for nanoelectronics applications. In this study, the feasibility of nanoshaping of 2D titanium carbides for tunable thermal management materials was investigated. 2D titanium carbides demonstrate high degrees of formability on nanoscale and efficiency as thermal management systems in nanoelectronics components. The thermal conductivity of various MXene 2D flakes was studied using molecular dynamics simulations. A robust thermal management behavior has been predicted for 2D MXenes after nanoshaping on various nanomold patterns, which will facilitate the development of MXene-based metamaterials for thermal management in electric nanocomponents. The size dependence analysis shows that the MXenes thermal conductivity is highly influenced by the flake size leading to a variation in experimental values due to scale factors. Our model showed that Ti 2 C is more sensible to strain at both supported and suspended conditions, while the thicker MXenes are not too influenced by strain. When supported, the thermal conductivities of all simulated MXenes considerably decrease due to Z phonon modes suppression. Bending strain also showed an effect in the MXenes thermal conductivity by scattering phonon modes. This makes MXenes an attractive option for the management of thermal fields. 
    more » « less