More Like this

1. POCOP-type cobalt and nickel pincer complexes bearing an appended phosphinite group

   https://doi.org/10.1139/cjc-2020-0137  

   Li, Yingze; Krause, Jeanette A.; Guan, Hairong (April 2021, Canadian Journal of Chemistry)

   The reaction of 1,3,5-( i Pr 2 PO) 3 C 6 H 3 with Co 2 (CO) 8 leads to the isolation of a POCOP-type mononuclear pincer complex {κ P ,κ C ,κ P -2,4,6-( i Pr 2 PO) 3 C 6 H 2 }Co(CO) 2 (1) or a tetranuclear species {κ P -{κ P ,κ C ,κ P -2,4,6-( i Pr 2 PO) 3 C 6 H 2 }Co(CO) 2 } 2 Co 2 (CO) 6 (2), depending on the ligand to cobalt ratio employed. The latter compound can be an impurity during the synthesis of {2,6-( i Pr 2 PO) 2 -4-Me 2 N-C 6 H 2 }Co(CO) 2 , when the ligand precursor 5-(dimethylamino)resorcinol is contaminated with phloroglucinol due to incomplete monoamination. Similarly, the reaction of 1,3,5-( i Pr 2 PO) 3 C 6 H 3 with NiCl 2 in the presence of 4-dimethylaminopyridine provides {κ P ,κ C ,κ P -2,4,6-( i Pr 2 PO) 3 C 6 H 2 }NiCl (3) bearing an appended phosphinite group. Structures 1–3 have been studied by X-ray crystallography. 

   more » « less
2. Crystal structures of phosphine-supported (η ⁵ -cyclopentadienyl)molybdenum(II) propionyl complexes

   https://doi.org/10.1107/S2056989021008008  

   Whited, Matthew T.; Ball, Margaret A.; Block, Alison; Brewster, Benjamin A.; Ferrer, LouLou; Jin-Lee, Helen J.; King, Colby J.; North, Jamie D.; Shelton, Inger L.; Wilson, David G. (September 2021, Acta Crystallographica Section E Crystallographic Communications)

   Three cyclopentadienylmolybdenum(II) propionyl complexes featuring triarylphosphine ligands with different para substituents, namely, dicarbonyl(η 5 -cyclopentadienyl)propionyl(triphenylphosphane-κ P )molybdenum(II), [Mo(C 5 H 5 )(C 3 H 5 O)(C 18 H 15 P)(CO) 2 ], ( 1 ), dicarbonyl(η 5 -cyclopentadienyl)propionyl[tris(4-fluorophenyl)phosphane-κ P ]molybdenum(II), [Mo(C 5 H 5 )(C 3 H 5 O)(C 18 H 12 F 3 P)(CO) 2 ], ( 2 ), and dicarbonyl(η 5 -cyclopentadienyl)propionyl[tris(4-methoxyphenyl)phosphane-κ P ]molybdenum(II) dichloromethane solvate, [Mo(C 5 H 5 )(C 3 H 5 O)(C 21 H 21 O 3 P)(CO) 2 ]·CH 2 Cl 2 , ( 3 ), have been prepared from the corresponding ethyl complexes via phosphine-induced migratory insertion. These complexes exhibit four-legged piano-stool geometries with molecular structures quite similar to each other and to related acetyl complexes. The extended structures of the three complexes differ somewhat, with the para substituent of the triarylphosphine of ( 2 ) (fluoro) or ( 3 ) (methoxy) engaging in non-classical C—H...F or C—H...O hydrogen-bonding interactions. The structure of ( 3 ) exhibits modest disorder in the position of one Cl atom of the dichloromethane solvent, which was modeled with two sites showing approximately equivalent occupancies [0.532 (15) and 0.478 (15)]. 

   more » « less
3. Structural diversity in copper(I) iodide complexes with 6-thioxopiperidin-2-one, piperidine-2,6-dithione and isoindoline-1,3-dithione ligands

   https://doi.org/10.1107/S2056989020009676  

   Wheaton, Amelia M.; Guzei, Ilia A.; Berry, John F. (August 2020, Acta Crystallographica Section E Crystallographic Communications)

   null (Ed.)

   Copper(I) iodide complexes are well known for displaying a diverse array of structural features even when only small changes in ligand design are made. This structural diversity is well displayed by five copper(I) iodide compounds reported here with closely related piperidine-2,6-dithione (SNS), isoindoline-1,3-dithione (SNS6), and 6-thioxopiperidin-2-one (SNO) ligands: di-μ-iodido-bis[(acetonitrile-κ N )(6-sulfanylidenepiperidin-2-one-κ S )copper(I)], [Cu 2 I 2 (CH 3 CN) 2 (C 5 H 7 NOS) 2 ] ( I ), bis(acetonitrile-κ N )tetra-μ 3 -iodido-bis(6-sulfanylidenepiperidin-2-one-κ S )- tetrahedro -tetracopper(I), [Cu 4 I 4 (CH 3 CN) 4 (C 5 H 7 NOS) 4 ] ( II ), catena -poly[[(μ-6-sulfanylidenepiperidin-2-one-κ 2 O : S )copper(I)]-μ 3 -iodido], [CuI(C 5 H 7 NOS)] n ( III ), poly[[(piperidine-2,6-dithione-κ S )copper(I)]-μ 3 -iodido], [CuI(C 5 H 7 NS 2 )] n ( IV ), and poly[[(μ-isoindoline-1,3-dithione-κ 2 S : S )copper(I)]-μ 3 -iodido], [CuI(C 8 H 5 NS 2 )] n ( V ). Compounds I and II crystallize as discrete dimeric and tetrameric complexes, whereas III , IV , and V crystallize as polymeric two-dimensional sheets. To the best of our knowledge, compound III is the first instance of an extended hexagonal [Cu 3 I 3 ] structure that is not supported by bridging ligands. Structures I , II , and IV display weak to moderately strong Cu...Cu cuprophilic interactions [Cu...Cu internuclear distances range between 2.5803 (10) and 2.8485 (14) Å]. All structures except III display weak hydrogen-bonding interactions between the N—H of the ligand and the μ 2 and μ 3 -I − atoms. Structure III contains classical N–H...O interactions between the SNO ligands that connect the molecules in a three-dimensional framework. Complex V features π–π stacking interactions between the aryl rings of the SNS6 ligands within the same polymeric sheet. In structure IV , there were three partially occupied solvent molecules of dichloromethane and one partially occupied molecule of acetonitrile present in the asymmetric unit. The SQUEEZE routine [Spek (2015). Acta Cryst . C 71 , 9–18] was used to correct the diffraction data for diffuse scattering effects and to identify the solvent molecules. The given chemical formula and other crystal data do not take into account the solvent molecules. 

   more » « less
4. Crystal structure and photoreactivity of a halogen-bonded cocrystal based upon 1,2-diiodoperchlorobenzene and 1,2-bis(pyridin-4-yl)ethylene

   https://doi.org/10.1107/S2053229620006233  

   Bosch, Eric; Battle, Jessica D.; Groeneman, Ryan H. (June 2020, Acta Crystallographica Section C Structural Chemistry)

   null (Ed.)

   The formation of a photoreactive cocrystal based upon 1,2-diiodoperchlorobenzene ( 1,2-C 6 I 2 Cl 4 ) and trans -1,2-bis(pyridin-4-yl)ethylene ( BPE ) has been achieved. The resulting cocrystal, 2( 1,2-C 6 I 2 Cl 4 )·( BPE ) or C 6 Cl 4 I 2 ·0.5C 12 H 10 N 2 , comprises planar sheets of the components held together by the combination of I...N halogen bonds and halogen–halogen contacts. Notably, the 1,2-C 6 I 2 Cl 4 molecules π-stack in a homogeneous and face-to-face orientation that results in an infinite column of the halogen-bond donor. As a consequence of this stacking arrangement and I...N halogen bonds, molecules of BPE also stack in this type of pattern. In particular, neighbouring ethylene groups in BPE are found to be parallel and within the accepted distance for a photoreaction. Upon exposure to ultraviolet light, the cocrystal undergoes a solid-state [2 + 2] cycloaddition reaction that produces rctt -tetrakis(pyridin-4-yl)cyclobutane ( TPCB ) with an overall yield of 89%. A solvent-free approach utilizing dry vortex grinding of the components also resulted in a photoreactive material with a similar yield. 

   more » « less
5. The reaction of thiourea and 1,3-dimethylthiourea towards organoiodines: oxidative bond formation and halogen bonding

   https://doi.org/10.1107/S205322962100869X  

   Peloquin, Andrew J.; Ragusa, Arianna C.; McMillen, Colin D.; Pennington, William T. (October 2021, Acta Crystallographica Section C Structural Chemistry)

   By varying the halogen-bond-donor molecule, 11 new halogen-bonding cocrystals involving thiourea or 1,3-dimethylthiourea were obtained, namely, 1,3-dimethylthiourea–1,2-diiodo-3,4,5,6-tetrafluorobenzene (1/1), C 6 F 4 I 2 ·C 3 H 8 N 2 S, 1 , thiourea–1,3-diiodo-2,4,5,6-tetrafluorobenzene (1/1), C 6 F 4 I 2 ·CH 4 N 2 S, 2 , 1,3-dimethylthiourea–1,3-diiodo-2,4,5,6-tetrafluorobenzene (1/1), C 6 F 4 I 2 ·C 3 H 8 N 2 S, 3 , 1,3-dimethylthiourea–1,3-diiodo-2,4,5,6-tetrafluorobenzene–methanol (1/1/1), C 6 F 4 I 2 ·C 3 H 8 N 2 S·CH 4 O, 4 , 1,3-dimethylthiourea–1,3-diiodo-2,4,5,6-tetrafluorobenzene–ethanol (1/1/1), C 6 F 4 I 2 ·C 3 H 8 N 2 S·C 2 H 6 O, 5 , 1,3-dimethylthiourea–1,4-diiodo-2,3,5,6-tetrafluorobenzene (1/1), C 6 F 4 I 2 ·C 3 H 8 N 2 S, 6 , 1,3-dimethylthiourea–1,3,5-trifluoro-2,4,6-triiodobenzene (1/1), C 6 F 3 I 3 ·C 3 H 8 N 2 S, 7 , 1,3-dimethylthiourea–1,1,2,2-tetraiodoethene (1/1), C 6 H 16 N 4 S 2 ·C 2 I 4 , 8 , [(dimethylamino)methylidene](1,2,2-triiodoethenyl)sulfonium iodide–1,1,2,2-tetraiodoethene–acetone (1/1/1), C 5 H 8 I 3 N 2 S + ·I − ·C 3 H 6 O·C 2 I 4 , 9 , 2-amino-4-methyl-1,3-thiazol-3-ium iodide–1,1,2,2-tetraiodoethene (2/3), 2C 4 H 7 N 2 S + ·2I − ·3C 2 I 4 , 10 , and 4,4-dimethyl-4 H -1,3,5-thiadiazine-3,5-diium diiodide–1,1,2,2-tetraiodoethene (2/3), 2C 5 H 12 N 4 S 2+ ·4I − ·3C 2 I 4 , 11 . When utilizing the common halogen-bond-donor molecules 1,2-, 1,3-, and 1,4-diiodotetrafluorobenzene, as well as 1,3,5-trifluoro-2,4,6-triiodobenzene, bifurcated I...S...I interactions were observed, resulting in the formation of isolated rings, chains, and sheets. Tetraiodoethylene (TIE) provided I...S...I cocrystals as well, but further yielded a sulfonium-containing product through the reaction of the S atom with TIE. This particular sulfonium motif is the first of its kind to be structurally characterized, and is stabilized in the solid state through a three-dimensional I...I halogen-bonding network. Thiourea reacted with acetone in the presence of TIE to provide two novel heterocyclic products, again stabilized in the solid state through I...I halogen bonding. 

   more » « less