skip to main content


Title: Layer-by-layer fabrication of 3D hydrogel structures using open microfluidics
Patterned deposition and 3D fabrication techniques have enabled the use of hydrogels for a number of applications including microfluidics, sensors, separations, and tissue engineering in which form fits function. Devices such as reconfigurable microvalves or implantable tissues have been created using lithography or casting techniques. Here, we present a novel open-microfluidic patterning method that utilizes surface tension forces to form hydrogel layers on top of each other, into a patterned 3D structure. We use a patterning device to form a temporary open microfluidic channel on an existing gel layer, allowing the controlled flow of unpolymerized gel in device-regions. After layer gelation and device removal, the process can be repeated iteratively to create multi-layered 3D structures. The use of open-microfluidic and surface tension-based methods to define the shape of each individual layer enables patterning to be performed with a simple pipette and with minimal dead-volume. Our method is compatible with unmodified (native) biological hydrogels, and other non-biological materials with precursor fluid properties compatible with capillary flow. With our open-microfluidic layer-by-layer fabrication method, we demonstrate the capability to build agarose, type I collagen, and polymer–peptide 3D structures featuring asymmetric designs, multiple components, overhanging features, and cell-laden regions.  more » « less
Award ID(s):
1807398 1719797
NSF-PAR ID:
10160743
Author(s) / Creator(s):
; ; ; ; ; ; ;
Date Published:
Journal Name:
Lab on a Chip
Volume:
20
Issue:
3
ISSN:
1473-0197
Page Range / eLocation ID:
525 to 536
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Engineering physiologically relevant in vitro models of human organs remains a fundamental challenge. Despite significant strides made within the field, many promising organ‐on‐a‐chip models fall short in recapitulating cellular interactions with neighboring cell types, surrounding extracellular matrix (ECM), and exposure to soluble cues due, in part, to the formation of artificial structures that obstruct >50% of the surface area of the ECM. Here, a 3D cell culture platform based upon hydrophobic patterning of hydrogels that is capable of precisely generating a 3D ECM within a microfluidic channel with an interaction area >95% is reported. In this study, for demonstrative purposes, type I collagen (COL1), Matrigel (MAT), COL1/MAT mixture, hyaluronic acid, and cell‐laden MAT are formed in the device. Three potential applications are demonstrated, including creating a 3D endothelium model, studying the interstitial migration of cancer cells, and analyzing stem cell differentiation in a 3D environment. The hydrophobic patterned‐based 3D cell culture device provides the ease‐of‐fabrication and flexibility necessary for broad potential applications in organ‐on‐a‐chip platforms.

     
    more » « less
  2. Area‐selective atomic layer deposition (AS‐ALD) techniques are an emerging class of bottom‐up nanofabrication techniques that selectively deposit patterned ALD films without the need for conventional top‐down lithography. To achieve this patterning, most reported AS‐ALD techniques use a chemical inhibitor layer to proactively block ALD surface reactions in selected areas. Herein, an AS‐ALD process is demonstrated that uses a focused electron beam (e‐beam) to dissociate ambient water vapor and “write” highly resolved hydroxylated patterns on the surface of highly oriented pyrolytic graphite (HOPG). The patterned hydroxylated regions then support subsequent ALD deposition. The e‐beam functionalization technique facilitates precise pattern placement through control of beam position, dwell time, and current. Spatial resolution of the technique exceeded 42 nm, with a surface selectivity of between 69.9% and 99.7%, depending on selection of background nucleation regions. This work provides a fabrication route for AS‐ALD on graphitic substrates suitable for fabrication of graphene‐based nanoelectronics. 
    more » « less
  3. Abstract

    While vat photopolymerization has many advantages over soft lithography in fabricating microfluidic devices, including efficiency and shape complexity, it has difficulty achieving well-controlled micrometer-sized (smaller than 100 μm) channels in the layer building direction. The considerable light penetration depth of transparent resin leads to over-curing that inevitably cures the residual resin inside flow channels, causing clogs. In this paper, a 3D printing process — in-situ transfer vat photopolymerization is reported to solve this critical over-curing issue in fabricating microfluidic devices. We demonstrate microchannels with highZ-resolution (within 10 μm level) and high accuracy (within 2 μm level) using a general method with no requirements on liquid resins such as reduced transparency nor leads to a reduced fabrication speed. Compared with all other vat photopolymerization-based techniques specialized for microfluidic channel fabrication, our universal approach is compatible with commonly used 405 nm light sources and commercial photocurable resins. The process has been verified by multifunctional devices, including 3D serpentine microfluidic channels, microfluidic valves, and particle sorting devices. This work solves a critical barrier in 3D printing microfluidic channels using the high-speed vat photopolymerization process and broadens the material options. It also significantly advances vat photopolymerization’s use in applications requiring small gaps with high accuracy in theZ-direction.

     
    more » « less
  4. Abstract

    A facile, high‐resolution patterning process is introduced for fabrication of electrolyte‐gated transistors (EGTs) and circuits using a photo‐crosslinkable ion gel and stencil‐based screen printing. The photo‐crosslinkable gel is based on a triblock copolymer incorporating UV‐sensitive terminal azide functionality and a common ionic liquid. Using this material in conjunction with conventional photolithography and stenciling techniques, well‐defined 0.5–1 μm thick ion gel films are patterned on semiconductor channels as narrow as 10 μm. The resulting n‐type ZnO EGTs display high electron mobility (>2 cm2Vs−1) and on/off current ratios (>105). Further, EGT‐based inverters exhibit static gains >23 at supply voltages below 3 V, and five‐stage EGT ring oscillator circuits display dynamic propagation delays of 50 μs per stage. In general, the screen printing and photo‐crosslinking strategy provides a clean room‐compatible method to fabricate EGT circuits with improved sensitivity (gain) and computational power (gain × oscillating frequency). Detailed device analysis indicates that significantly shorter delay times, of order 1 μs, can be obtained by improving the ion gel conductance.

     
    more » « less
  5. Additive manufacturing, also known as three-dimensional (3D) printing, is an approach in which a structure may be fabricated layer by layer. For 3D inkjet printing, droplets are ejected from a nozzle and each layer is formed droplet by droplet. Inkjet printing has been widely applied for the fabrication of 3D biological gel structures, but the knowledge of the microscale interactions between printed droplets is still largely elusive. This study aims to elucidate the alginate layer formation process during drop-on-demand inkjet printing using high speed imaging and particle image velocimetry. Droplets are found to impact, spread, and coalesce within a fluid region at the deposition site, forming coherent printed lines within a layer. Interfaces are found to form between printed lines within a layer depending on printing conditions and printing path orientation. The effects of printing conditions on the behavior of droplets during layer formation are discussed and modeled based on gelation dynamics, and recommendations are presented to enable controllable and reliable fabrication of gel structures. 
    more » « less